Categories
Flight Simulation

Grosse-Île airstrip and MSFS 2020.

Close-up view of the Grosse-île runway and the area with the Microsoft flight simulator (MSFS 2020).
Close-up view of the Grosse-île runway and the area with the Microsoft flight simulator (MSFS 2020).

It took the Microsoft Flight Simulator (MSFS 2020) for me to discover this landing strip on Grosse-Île. Even the Canada Flight Supplement (CFS) from Nav Canada does not mention it.

Decades ago, Canadian authorities used this island in the middle of the St. Lawrence River as a quarantine site for immigrants arriving in Canada. Many Irish people, among others, made an obligatory stop on this strip of land before being allowed to continue their journey to Canada.

At one time, a section of the island was reserved for Canadian and American researchers for their top secret research on Anthrax.The most amazing thing about reading the article is realizing that the entire production of this bacteriological weapon (439 liters) was mixed with formaldehyde and put in barrels that were dumped somewhere in the St. Lawrence River when it was decided that it would no longer be useful, as the Second World War took a turn in favor of the Allies. It seems to me that formaldehyde does not prevent barrels from rusting, but hey… back to the point.

Today, tourists can visit Grosse Île and the Irish Memorial National Historic Site during the summer months using the services of Croisières Lachance, located in Berthier-sur-Mer.

Where is Grosse-Île located? In the province of Quebec, a little east of Quebec City. It is one of the many islands that you can fly over once you have left Île d’Orléans behind. Below, a screenshot from Google Maps.

Grosse-Île in Quebec on Google Maps.
Grosse-Île in Quebec on Google Maps.

The satellite image below clearly shows that this is not an invention. Microsoft designates this runway as CYMN Montmagny: a mistake that one can easily live with, since by giving an official code to this Grosse-Île runway, the pilot can use it as a navigation point in his GPS.

Satellite view of Grosse-Île and its runway.
Satellite view of Grosse-Île and its runway.

So, let’s use a small Cessna in US Coast Guard colors to make a virtual flight from Quebec City airport (CYQB) to Grosse-Île (CYMN). It was a bit chilly on this February day in Quebec City, so I decided to transport us to July for this flight, adding a few cumuliform clouds in the process.

Leaving Quebec City for Grosse-Île with MSFS 2020.
Leaving Quebec City for Grosse-Île with MSFS 2020.

This short flight will allow us to fly over Île d’Orléans, Île Madame (owned by Laurent Beaudoin, former major shareholder of Bombardier), Île au Ruau  (purchased in 2019 by the rich owner of the Gildan empire) to finally arrive at Grosse-Île.

Approaching Grosse-Île over the St Lawrence Seaway with the MSFS 2020 flight simulator.
Approaching Grosse-Île over the St Lawrence Seaway with the MSFS 2020 flight simulator.

The picture below shows the aircraft on a right base for the Grosse-Île runway. I do not know the official dimensions of this dirt airstrip, but it can easily accept a Cessna aircraft such as ours.

Cessna in base for the Grosse-Île runway with the MSFS 2020 flight simulator.
Cessna in base for the Grosse-Île runway with the MSFS 2020 flight simulator.

Below, the aircraft is on final for the runway.

On final for the Grosse-Île runway.
On final for the Grosse-Île runway.

A final screenshot shows the Cessna taxiing down the runway after landing. As you can see, the runway can accommodate much larger aircraft. If you want to make a real flight to this island, find out beforehand about the condition of the runway and the restrictions surrounding its use by visiting pilots.

Cessna aircraft on Grosse-Île after the landing.
Cessna aircraft on Grosse-Île after the landing.

Click on the link for more flight simulation experiences on my blog.

Categories
Real life stories as a flight service specialist (FSS): the Nav Canada flight information center (FIC) in Québec City

The overheated flight service specialist

In 2002, the Quebec flight information center employees were advised that journalists had been authorized to film inside the Nav Canada installations.

In anticipation of the shooting, one of the flight service specialists went over the list of employees who would be working during the journalist’s visit. He phoned those employees and suggested an appropriate dress code. He was just trying to help. One of the employees that we will name Denis could not be contacted, but the message was nonetheless left to his wife.

The next day, just before the journalist’s visit, Denis arrived in the center.  He entered the flight service station room and dryly demanded the name of the employee who phoned his wife to suggest a dress code for him. It just happened that this employee was facing him. Denis kind of lost his temper and ordered everyone to mind their own business. There was some tension in the air. It would not have been a good idea to contradict him…

Few hours later, during a coffee break, I found myself in the employee’s kitchen in company of Denis. He put a donut in the microwave and sat down in a corner by himself, waiting to hear the “beap” from the microwave, indicating that the donut was hot enough.

But from where he was sitting, Denis did not see that the donut was overheating. In fact, the donut was gradually changing color and shape and smoke was coming through all the microwave’s gaps it could find. For safety reasons, I was checking that the damages were limited only to the donut.

Overheating fat really makes a lot of smoke. Denis asked me: “Don’t you find that it smells of burning?” I answered positively. He added: “ But look, there is smoke near you!”

Realizing that I was not going to move, he stood up to find out what was going on. He soon discovered that the source of the smoke came from a deformed and darkened entity still turning on the tray. He shouted: “It’s my donut! It’s all burned! Why didn’t you tell me?” I could only reply: “ Just about an hour ago, you told us in no uncertain tone to mind our business. How can I know how you prefer your donut?!” Useless to say, this did not help in calming him down…

Click on the link for other real life stories at the Quebec flight information center on my blog.

Categories
Aviation photography

Aviation photography: Quebec’s CL- 415s heading towards Fort McMurray, Alberta

A Bombardier CL-415 water bomber, property of the Government of Quebec, is being prepared for its flight towards Fort McMurray, May 2016
A Bombardier CL-415 water bomber, property of the Government of Quebec, is being prepared for its flight towards Fort McMurray, May 2016

Quebec’s CL-415s helping out in Fort McMurray

On May 5th, 2016, according to what had been announced by the Government of Quebec, four CL-415s took off from the Quebec Jean-Lesage international airport (CYQB) heading to Fort McMurray, Alberta, to help in the fight against widespread forest fires in that province. It is the worst natural disaster that Canada has known in its history.

Preparing flight crews and aircrafts for such a long cross-country trip naturally demands much coordination from the SOPFEU (Society for the protection of forests against fires). Once they will have landed at the Fort McMurray airport, the pilots of those CL-415s will be under the direct command of the Albertan authorities in charge of fighting the wildfires, since the latter are best positioned to know exactly what the local needs are.

I figure that the flight service specialists (FSS) of the Nav Canada flight information center (FIC) in Edmonton must have quite busy days with the increased aerial activity associated with the numerous fires…

Crew members are walking towards the Government of Quebec CL-415; they will soon be airborne and heading to Fort McMurray in Alberta, to fight the forest fires (2016)
Crew members are walking towards the Government of Quebec CL-415; they will soon be airborne and heading to Fort McMurray in Alberta, to fight the forest fires (2016)

The picture above shows crew members heading towards their assigned aircraft. Once they start working in the Fort McMurray region, they will not only have to directly fight the forest fires but also head to sectors that have not yet been touched by fire and water the area thoroughly to prevent new wildfires.

A Government of Quebec CL-415 number 245 is taxiing at the Quebec Jean-Lesage international airport to take-off towards Fort McMurray, in Alberta, to help fight the out of control forest fires in that province during May 2016.
A Government of Quebec CL-415 number 245 is taxiing at the Quebec Jean-Lesage international airport to take-off towards Fort McMurray, in Alberta, to help fight the out of control forest fires in that province during May 2016.

Taking pictures of propeller-driven aircrafts

A Bombardier CL-415 water bomber takes off from the Quebec Jean-Lesage international airport heading to Fort McMurray, in Alberta, to help fight the forest fires (2016)
A Bombardier CL-415 water bomber takes off from the Quebec Jean-Lesage international airport heading to Fort McMurray, in Alberta, to help fight the forest fires (2016)

It is a bit touchy to photograph propeller-driven aircrafts while making sure that there is a sensation of movement. In a natural reflex to want to avoid blurred pictures, the photographer uses a shutter speed that corresponds to the focal used for the shot. In the case of the picture above, the focal was 400mm. But if a shutter speed of 1/400 had been used, the propellers would have been totally immobilized and the aircraft would have looked like its climbing while not using its engines.

It was necessary to reduce the speed to 1/160, thus increasing the risk of obtaining a blurred picture. In order to get both image sharpness and moving propellers visual effect, the photographer has to follow exactly the movement of the aircraft with the camera so that it looks totally immobile in the viewfinder. This asks for a bit of practice but allows for more realistic photos.

The CL-415 in a black and white photo

Black and white photo of a Bombardier CL-415 (C-GQBG) flying over Quebec City in 2015
Black and white photo of a Bombardier CL-415 (C-GQBG) flying over Quebec City in 2015

The government of Canada helping out Alberta’s citizens

The government of Canada, under Justin Trudeau, has promised to match the amounts of money offered by all Canadians to the Red Cross society toward helping the Fort McMurray population.

Obviously, its contribution will not stop there (in fact, far from it), but the message is for the whole Canadian population to contribute generously to support the efforts of the Red Cross. It is already estimated that the material damages will reach at least nine billion dollars and that numerous years will be required to rebuild everything. The Liberal Party of Canada had built its political campaign around the need to invest for the renewal of infrastructures. With the Fort McMurray fires, there will be plenty of new unplanned expenses ahead.

More than 1,400 firemen are fighting the wildfires. So few, there has been very few lives lost, although “very few” is always too much. The crisis is, according to everyone, well managed by the government of Alberta.

At the time of writing, there was still no rain forecasted for days to come and the drought was also extending to the southern half of Saskatchewan and part of Manitoba. The winds were expected to increase, which would mean that even more resources would be needed in the near future to bring those wildfires under control.

It seems to me that the government of many Canadian provinces would benefit in acquiring new water bombers like the CL-415 to give them an increased margin of manoeuver that would allow them to react more quickly, if we take into account the tendency for the ever growing number and size of forest fires. In the picture below, the government of Quebec CL-415 number 247 is just airborne from Quebec to Fort McMurray.

A Bombardier CL-415 C-GQBK airborne from the Quebec Jean-Lesage international airport heading to Fort McMurray, Alberta, in May 2016
A Bombardier CL-415 C-GQBK airborne from the Quebec Jean-Lesage international airport heading to Fort McMurray, Alberta, in May 2016

The CL-215s will not head to Fort McMurray

While several CL-415s are leaving for Alberta, few water bombers, like the two Canadair CL-215s shown below, stay at the Quebec Jean-Lesage international airport in case of forest fires in the province and also to be used for the seasonal rehearsal needed for every pilot before they are dispatched across the province of Quebec.

Two Canadair CL-215 water bombers parked at the Quebec Jean-Lesage international airport in May 2016.
Two Canadair CL-215 water bombers parked at the Quebec Jean-Lesage international airport in May 2016.

Global warming

Some people can say that global warming is not responsible for the increasing number of extended wildfires. They might be right, but I prefer to adopt a wider view than only what is going on in Alberta. Heat transfer between the north and south are now more extreme in order to equalize the temperatures around the globe. All means to reduce the difference in temperatures between the equator and the poles are at work and this causes increasing problems to particular regions.

The Kamloops region in British-Columbia, when numerous forest fires were raging 2014.
The Kamloops region in British-Columbia, when numerous forest fires were raging 2014.

A powerful El Nino phenomenon, repetitive Omega blocks, the air circulation in different cells (Hadley, Ferrell, polar, Walker) all participate in the heat exchange. At a more reduced scale, we also regularly hear of cold and warm fronts in the meteorological forecasts.

It is certainly not local warm fronts that are responsible for the fact that a thinner layer of permafrost is unable to ensure the stability of Arctic runways anymore. Nor are fronts responsible for the fact that houses on stilts do not have a stable foundation anymore. Many heat records have been established these past years in northern Canada. There will certainly be large amounts of money to spend to rebuild the Nordic infrastructures.

Brush fires as soon as April in Alberta

This year, as soon as April, there were widespread brush fires in a region as north as Fort McMurray in Alberta because winter has not brought much snow to humidify the land during Spring. I thus wondered what would happen once in July. Albertans did not need to wait that long to get the answer.

Western Canada forest after a fire (2014)
Western Canada forest after a fire (2014)

The modelization of climatic changes indicates that, in the Fort McMurray region, the forest fire season is already fifteen days longer that it used to be. More heat might favor more droughts. But an increase in temperature also favors the development of thunderstorms and with them comes lighting that will start up new fires.

One thing is sure: insurance companies will not lose time with the different theories on global warming. The reinsurers (those who insure the insurance companies) have the obligation to limit their losses to stay afloat and premiums will quickly increase to answer to the thousands of claims following an increasing number of natural disasters.

Photos of the local air traffic in Quebec, just after the CL-415s departed to Fort McMurray

FedEx ATR 72-202F C-FTAR and Air Canada Express Bombardier DHC-8-Q-402NG (C-GIJZ) at the Quebec Jean-Lesage international airport in May 2016
FedEx ATR 72-202F C-FTAR and Air Canada Express Bombardier DHC-8-Q-402NG (C-GIJZ) at the Quebec Jean-Lesage international airport in May 2016

At the Quebec airport, between the take offs of the four Bombardier CL-415 towards Fort McMurray, I was able to take few pictures of the local air traffic. In the photo above, it is possible to see a FedEx ATR 72 (C-FTAR) taxiing toward the ramp after a landing runway 06. An Air Canada Express Bombardier DHC-8-402 (Q-400) (C-GIJZ) was also being towed for is imminent departure.

ATAC’s Hawker Hunter N339AX

Being in luck, I was able to capture a Hawker Hunter (N339AX) belonging to the American company  ATAC, just airborne from Quebec. As for any military jet, it is difficult to ignore them on take-off: the reactor’s noise is there to remind you of their presence…

A Hawker Hunter belonging to the american company ATAC is airborne from the Quebec Jean-Lesage international airport (CYQB), May 2016
A Hawker Hunter belonging to the american company ATAC is airborne from the Quebec Jean-Lesage international airport (CYQB), May 2016
A Hawker Hunter, from the american company ATAC, is airborne from the Quebec Jean-Lesage international airport (CYQB) in May 2016
A Hawker Hunter, from the american company ATAC, is airborne from the Quebec Jean-Lesage international airport (CYQB) in May 2016

The pictures above have been taken with a Canon 5D MKII camera, equipped with a telephoto lens Canon 70-200 f2.8L IS II USM with a polarizing filter and a Canon Extender EF 2X III which brought the focal length to 400 mm. Even then, more cropping was necessary to enlarge the aircraft since I was quite far away from the runway.

Wishing to ensure that the image was sharp (a blurred picture is more probable with a 400 mm focal length while the photographer attempts to follow a fast flying jet), I adjusted the shutter speed to 1/1600 and made sure that the automatic focus was set on AI servo.

I now realized that a slower speed could have worked a bit better since it would have allowed showing a blurred forest in the background while keeping the aircraft sharp. But it is not often that you have the opportunity to see a Hawker Hunter in flight these days and I played safe with the shutter speed. The ideal shot will be for another day…

CL-415s and CL-215s together in Quebec (2012 photo)

CL-415 and CL-215 water bombers belonging to the Gouvernment of Quebec. Quebec Jean-Lesage international airport (CYQB) 2012
CL-415 and CL-215 water bombers belonging to the Gouvernment of Quebec. Quebec Jean-Lesage international airport (CYQB) 2012

A last picture, taken few years ago, during autumn 2012, shows numerous water bombers CL-415 and CL-215 parked at the Quebec Jean-Lesage international airport (CYQB). During the off- season, the water bombers are brought back to Quebec City from the different bases were they have been in operation during summertime.

For other articles on aviation and photography, click on the following link: Aviation photography

Categories
Real life stories as a flight service specialist (FSS): the Nav Canada flight information center (FIC) in Québec City

Last day at work for a flight service specialist (FSS)

A souvenir photo in front of a Eurocopter EC120 Colibri (C-FCOS) at the Quebec Jean-Lesage international airport (2015)
A souvenir photo in front of a Eurocopter EC120 Colibri (C-FCOS) at the Quebec Jean-Lesage international airport (2015)

December 2013. Time for retirement had come. On my last working shift as a flight service specialist (FSS), I was able to share good memories of the past experiences as a Transport Canada and later Nav Canada employee. A shift supervisor had bought an excellent chocolate cake which was rapidly taken care of by the employees.

The next year, during an official retirement party including two other retirees, the Nav Canada flight information center (FIC) employees in Quebec City (CYQB) presented us with several gifts. I used the gift certificates to book a helicopter ride.

The pilot headed towards the Quebec Bridge then followed the St-Lawrence Seaway to Old Quebec. He then flew towards the Davie shipyard, Île d’Orléans, the Montmorency falls and then returned to the Quebec Jean-Lesage international airport. During the flight, we were able to witness the arrival of the Queen Mary II cruise ship in Old Quebec. Here are some pictures that I took during the flight:

Samuel-de-Champlain promenade and St-Lawrence Seaway in 2015
Samuel-de-Champlain promenade and St-Lawrence Seaway in 2015
The Queen Mary II passing by Île d'Orléans enroute to Quebec in 2015
The Queen Mary II passing by Île d’Orléans enroute to Quebec in 2015
The Château Frontenac, Dufferin Terrace and a small part of Old Quebec in 2015
The Château Frontenac, Dufferin Terrace and a small part of Old Quebec in 2015
Davie shipyard in Quebec (2015)
Davie shipyard in Quebec (2015)
Orleans Island and St-Lawrence Seaway, Quebec, 2015
Orleans Island and St-Lawrence Seaway, Quebec, 2015
Quebec Jean-Lesage international airport in 2015. The Nav Canada installations are visible (control tower and flight information center (FIC))
Quebec Jean-Lesage international airport in 2015. The Nav Canada installations are visible (control tower and flight information center (FIC))

I hope you liked the real life stories as pilot, flight instructor, Transport Canada student and flight service specialist in Inukjuak, Rouyn-Noranda, Iqaluit and Quebec City, as well as FSS for Nav Canada at the flight information center in Quebec City. I have included all the stories and photos on my web site www.francoisouellet.ca , in the following “real life stories” sections:

Real life stories as a pilot

Life as a student at the Transport Canada Training Institute

Real life stories as a FSS in Inukjuak

Real life stories as a FSS in Rouyn-Noranda

Real life stories as a FSS in Iqaluit

Real life stories as a FSS in Quebec City

There were naturally many more stories that would have deserved to be written but, due to their particular nature, those stories had to stay confidential.

Thanks for the encouragements and comments shared in person or via electronic communication.

N.B.: All the articles published on the web site https://francoisouellet.ca/en/ are under copyright protection. All rights reserved. Thanks for your understanding.

Categories
Real life stories as a flight service specialist (FSS): the Nav Canada flight information center (FIC) in Québec City

A storm goes through the Quebec Jean-Lesage international airport

A roll arcus cloud in development ahead of a thunderstorm approaching the Quebec Jean-Lesage airport in 2012.
A roll arcus cloud in development ahead of a thunderstorm approaching the Quebec Jean-Lesage airport in 2012.

Summer 2012. A very active cold front had been sweeping across the province and was about to hit the Québec Jean-Lesage international airport (CYQB). Considering the winds and the temperature spread, as well as the weather radar, it was obvious that it would be a very interesting show.

The Nav Canada control tower and flight information center (FIC) being collocated, the common stairway surrounding the tower became a privileged spot from where to take pictures. As a flight service specialist (FSS) on a short morning break, I grabbed my camera and headed outside on the stairway, just in time to see a line of roll arcus clouds arrive over the mountains to the north-west.

A roll arcus cloud ahead of a thunderstorm heading for Quebec City in 2012
A roll arcus cloud ahead of a thunderstorm heading for Quebec City in 2012

The first showers started, quickly followed by strong gusty winds and hail. In order to protect myself from the severe weather, I just had to slightly change position on the stairway and use the tower as a shield. Satisfied with my shots, I abandoned my observation post and let Mother Nature express herself.

A roll arcus cloud in development ahead of a thunderstorm approaching the Quebec Jean-Lesage airport in 2012.
A roll arcus cloud in development ahead of a thunderstorm approaching the Quebec Jean-Lesage airport in 2012.
An arcus cloud ahead of a thunderstorm approaching the Quebec Jean-Lesage airport in 2012
An arcus cloud ahead of a thunderstorm approaching the Quebec Jean-Lesage airport in 2012
An arcus roll cloud in delopment near the Quebec Jean-Lesage airport in 2012
An arcus roll cloud in delopment near the Quebec Jean-Lesage airport in 2012
Categories
Aviation photography

Aviation photography: plane spotting at the Toronto Lester B. Pearson international airport (CYYZ)

Air Canada Airbus A330-343 C-GHLM in Toronto 2016
Air Canada Airbus A330-343 C-GHLM in Toronto 2016

Here is some information aimed at helping tourists visiting Toronto, who like photography and aviation, and would think of booking one day during their visit to head to the Toronto Lester B. Pearson international airport (CYYZ) for a plane spotting photo session.

Initial planning

If you can, get a scanner or download an app on your cell phone to get real time information on air traffic around the airport: you will then know in advance the type and nationality of inbound or departing aircrafts.

Search for websites giving you access to Toronto airport VHF frequencies and program your scanner if you decided to get one.

Have a look at different plane spotting websites for the Toronto airport: there are many precious advices from experienced plane spotters that will prove useful in heading to the best spots and avoiding common mistakes.

Print two or three maps of secondary routes around the airport so that you can orient yourself when there is a change in runway use due to different winds or if you use a taxi ride to move around the airport: the driver will always ask you details on how to get there since those secondary routes are not a common destination for him (and chances are that he will not know where to go if you ask him to head to threshold of runway 05. Basically, he needs road names, not runway numbers).

Cessna 560XL S5-BAV Toronto 2016
Cessna 560XL S5-BAV Toronto 2016
British Airways Boeing 777-236 G-ZZZA in Toronto 2016
British Airways Boeing 777-236 G-ZZZA in Toronto 2016

Before leaving your Toronto hotel

Before you leave the hotel, look at the Toronto weather forecast, among them the TAF, to know the wind pattern for the day. The Nav Canada site has everything you need to know and there is a possibility to choose between coded or plain aviation language.

The Environment Canada site is also very useful.

Don’t forget to bring many snacks as well as a bottle of water since you will possibly be at a good distance from a restaurant for many hours, depending on which runway is in use. The same goes for additional batteries and memory cards for the camera.

Don’t forget the scanner, the cell phone (to call a taxi driver or get access to the arrivals and departures information) and all the photo equipment needed, as well as an abnormally high number of clothing layers necessary in case of winter photography: eight hours almost immobile outside in February calls for an appropriate preparation if you want to appreciate your experience. If you economize on clothing, it is certain that you will have to shorten your photography session.

I chose February for its very interesting light and not for its temperature! Most of the shots in this article were taken in only one day at the Toronto airport, between 10h30am and 18h30.

American Airlines MD-82 N482AA final 05 Toronto 2016
American Airlines MD-82 N482AA final 05 Toronto 2016

From the hotel to the airport

If you chose to stay at a downtown hotel in Toronto, the best way to get to the Toronto international airport is to use the UP Express train, from the Union Station on Front Street. Its use is very simple and departures are made every fifteen minutes. In February 2016, the cost was CDN $44.00 for a return trip to the airport, while a taxi ride cost $130.00.

UP Express Toronto 2016
UP Express Toronto 2016

The UP Express ride only takes 25 minutes and the train stops at Terminal 1.

It is preferable to avoid using your car around the Toronto international airport since some secondary roads are private and no stopping is allowed. You will take more time to look for police than to enjoy your plane spotting photography session.

Once you are at Terminal 1

Once you exit the UP Express at Terminal 1, get your scanner and monitor the ATIS frequency (120.825) to get the latest information on the runways in use for take offs and landings. For my photo session, the ATIS announced that runway 05 and 06L were in use, both for arrivals and departures. I took a taxi, showed the map with secondary roads to the driver and within few minutes I was where I needed to be and started the photo session.

Air Transat Airbus A-330 C-GTSN Toronto 2016
Air Transat Airbus A-330 C-GTSN Toronto 2016

A preliminary internet search allowed to discover that heavies mostly arrive from Europe during the afternoon et that runway 05/23 is favored for Emirates Airline Airbus A-380 arrival. I thus decided to position myself near runway 05 instead of 06L.

There are two or three quite isolated spots around the airport that provide interesting point of views for aircraft photos but that can present security problems for a photographer working alone with expensive equipment. Experienced plane spotters suggest that you should be accompanied by friends if you decide to opt for those spots (see the “plane spotting” internet sites suggested at the beginning of this article).

Emirates A-380 final for Toronto (CYYZ)
Emirates A-380 final for Toronto (CYYZ)
Emirates A-380 on final for Toronto (CYYZ) 2016
Emirates A-380 on final for Toronto (CYYZ) 2016
Emirates A-380 on final 05 for Toronto (CYYZ) 2016
Emirates A-380 on final 05 for Toronto (CYYZ) 2016

Technical advices

For precise photos of aircrafts in movement, I use the following parameters with my Canon 5D MKII camera:

1. Only the central AF Point of the auto focus system is selected and not the surrounding ones in order to avoid that the camera sets the focus on other objects than what I desire (trees, ILS structure, buildings).

2. The AI Servo setting is more efficient than the AI Focus or One Shot. The aircraft will be followed precisely.

3. If I want to include surrounding objects in the photo, I adjust the aperture to 7.1 or 8, instead of 11 or 13. I thus avoid increasing the ISO too much, which would affect the picture’s quality if it has to be enlarged with Photoshop.

Westjet Boeing 737-8CT C-GWSV Disneyland Livery in Toronto 2016
Westjet Boeing 737-8CT C-GWSV Disneyland Livery in Toronto 2016

4. To take pictures of an approaching propeller powered aircraft, a speed adjusted to 1/125 is generally adequate. You must pivot according to the aircraft movement so that it looks like it is immobile in your viewfinder. The picture is easier to take when the aircraft is farther away but becomes more of a challenge when it gets closer and flies by you since you must constantly change your pivoting speed.

Porter Q-400 C-GLQD on final for Toronto Billy Bishop airport (CYTZ) 2016
Porter Q-400 C-GLQD on final for Toronto Billy Bishop airport (CYTZ) 2016
Air Canada DHC-8-102 C-FGQK Toronto 2016
Air Canada DHC-8-102 C-FGQK Toronto 2016

5. A shutter speed that is too high will immobilize the propeller of an aircraft and make it look like the engine is not working, which will take away realism.

6. Throughout the day, position yourself so as to have the sun behind you (if there is any sun!), unless you are looking for special effects.

Global 5000 GL5T C-GJET in Toronto 2016
Global 5000 GL5T C-GJET in Toronto 2016

7. A very high quality lens, like the Canon 50mm 1.4, allows for beautiful pictures during the evening since there is no compromise on ISO, as the lens does not need much light. The grain size stays relatively small.

Air Canada Boeing 777 final 05 Toronto 2016
Air Canada Boeing 777 final 05 Toronto 2016

8. I use a very low ISO if the photo includes an interesting but far away aircraft, in order to be able to crop the picture with Photoshop. Since I cannot compromise on the speed to avoid a blurred picture, it becomes obvious that it is the aperture that pays the price.

Air Canada Airbus A-330 final 06L Toronto 2016
Air Canada Airbus A-330 final 06L Toronto 2016

9. If the situation allows it, add visual references other than clouds to get a bit more variety in your aircraft photo collection.

Air Canada Boeing 777 final runway 05 Toronto 2016
Air Canada Boeing 777 final runway 05 Toronto 2016

10. Try a black and white photo if the cloud formation is particularly interesting.

C-GQBG CL-415 and cirrus clouds on a black and white picture
C-GQBG CL-415 and cirrus clouds on a black and white picture

11. RAW+JPEG files allow for important adjustments when necessary. A JPEG only photo gives you little leeway when you want to correct mistakes or during problematic lighting conditions.

12. Variable sky conditions and constant direction winds are preferable for your photo session since the runway in use will not be changed in the afternoon and your pictures will benefit from different light intensity and cloud formations.

13. If you want to take the aircraft in relation to the ILS poles and you are looking for a symmetrical photo, just move few inches to the right or left while the aircraft is approaching or going away from you. You will also want to avoid that the horizontal poles of the ILS cut the plane and make it difficult to see.

Westjet Boeing 737-800 final 05 Toronto 2016
Westjet Boeing 737-800 final 05 Toronto 2016

14. Have fun experimenting, like taking a shot just above your head while including other objects for added interest.

On the ILS 05 for Toronto 2016
On the ILS 05 for Toronto 2016

15. Instead of always showing the whole aircraft, try a close-up view.

Air Canada Boeing 787-9 C-FNOI in Toronto 2016
Air Canada Boeing 787-9 C-FNOI in Toronto 2016

16. The close-up view might be such that even passengers of an aircraft on final will look at you while you immortalize them.

United Express on final at the Quebec Jean-Lesage international airport.
United Express on final at the Quebec Jean-Lesage international airport.

17. Chances are that you will meet other enthusiast plane spotters in the same area as yours since they also prepared themselves for a successful photo session.

Westjet Boeing 737-800 C-FYPB in Toronto 2016
Westjet Boeing 737-800 C-FYPB in Toronto 2016

18. Since you are in Toronto, head to Toronto Harbour when you are back downtown. You will witness the air traffic surrounding the Toronto Billy Bishop airport (CYTZ), formerly known as Toronto Island, and possibly take some original shots.

Porter Q-400 C-GLQM and C-GLQB at Toronto CYTZ 2016
Porter Q-400 C-GLQM and C-GLQB at Toronto CYTZ 2016

19. This is the photo equipment used for my Toronto airport plane spotting session: Canon 5D MKII camera and the following Canon lenses: EF 50mm f/1.4 USM, EF 16-35mm f/2.8L II USM, EF 24-70mm f/2.8L USM, EF 70-200mm f/2.8L IS II USM. No polarizer was used that day since I wanted to increase my margin of manoeuver with fast moving aircrafts under the February low intensity light.

Air Canada Rouge Boeing 767-300ER final 05 at Toronto 2016
Air Canada Rouge Boeing 767-300ER final 05 at Toronto 2016
American Eagle CRJ-701ER N523AE Toronto 2016
American Eagle CRJ-701ER N523AE Toronto 2016

Aviation photography requires much planning for successful photos. But all your efforts will rapidly bear fruits once you are on site and you will not see time pass! Have a great plane spotting session and give me some news of your experience if you can!

Air Canada Boeing 767-375 (ER) C-FCAB in Toronto 2016
Air Canada Boeing 767-375 (ER) C-FCAB in Toronto 2016

You can have access to other aircraft photos taken at Toronto through this link on my site:
photo galleries/aviation only

For other articles on aviation and photography, click on the following link: Aviation photography

Categories
Real life stories as a flight service specialist (FSS): the Nav Canada flight information center (FIC) in Québec City

Photography: The St-Jean-sur-Richelieu hot air balloon festival

The hot air balloon C-FNHP is being inflated at the St-Jean-sur-Richelieu festival in 2012
The hot air balloon C-FNHP is being inflated at the St-Jean-sur-Richelieu festival in 2012

The Nav Canada flight service specialists (FSS) working at the flight information center (FIC) at the Quebec Jean-Lesage international airport (CYQB) regularly receive telephone calls from hot air balloon pilots preparing their next flight. Actual and forecasted wind conditions are important, be it on the ground or in the air. But the FSS must also take into account the slightest possibility of a rain shower that would wet the balloon’s envelope, the variation in the convection according to the time of the day which would then affect the winds, the local effects, etc.

Although it is interesting to brief a hot air balloon pilot on the telephone, it is far better to witness their activity when getting ready for a flight. And the effect is even more striking when you position yourself in the middle of a field where more than a hundred hot air balloons lift altogether.

A first group of hot air balloons are autorized to lift at the St-Jean-sur-Richelieu festival in 2012
A first group of hot air balloons are autorized to lift at the St-Jean-sur-Richelieu festival in 2012

Summer 2012. A beautiful day was expected in St-Jean-sur-Richelieu. Blue sky and calm winds were forecasted for the evening. There would certainly be photo opportunities (Canon 5D MKII).

The field where the balloons were being prepared was fenced, but there were here and there openings and it seemed possible to enter the area without attracting too much attention. I made an attempt and could rapidly live the frenzy associated with the preparation and launch of more than one hundred hot air balloons.

Rising hot air balloons in St-Jean-sur-Richelieu in 2012
Rising hot air balloons in St-Jean-sur-Richelieu in 2012

The balloons progressively took shape and it became possible to see their designs and superb colours. Each team was taking care of the last details that ensure a synchronized launch when the signal would be given. The organizer eventually gave the go ahead signal and the hot air balloons all lifted up within a very short time span. This was a magnificent show!

Hot air ballons at the St-Jean-sur-Richelieu Festival in 2012
Hot air ballons at the St-Jean-sur-Richelieu Festival in 2012
Visitors at the 2012 St-Jean-sur-Richelieu hot air balloons festival
Visitors at the 2012 St-Jean-sur-Richelieu hot air balloons festival

Few years earlier, during summer 2005, a hot air balloon had flown over our house in Quebec City at about one hundred feet. This was not a normal situation to witness that balloon slowly lose altitude and get closer to electrical wires. I had taken my bike and followed the balloon since it became obvious that the pilot was trying to land, possibly short of propane gas.

The pilot did not have an easy task, flying low over the city streets, close to the wires and other obstacles. The passengers must have been wondering what would be the issue of that flight. Arriving near a school, the pilot had seen a small parking lot and tried to land there, avoiding the church steeple on the other side of the street.

We were few citizens to hang to the basket and immobilize it while the balloon’s envelope was slowly deflating. I was able to take a shot of that unusual balloon’s approach…

Hot air balloon landing on a Quebec City street in 2005
Hot air balloon landing on a Quebec City street in 2005

For more real life stories about being a FSS in Quebec City, click on the following link: Flight service specialist (FSS) in Quebec City

Categories
Real life stories as a flight service specialist (FSS): the Nav Canada flight information center (FIC) in Québec City

Air Canada and the Nav Canada flight information center (FIC) in Quebec City

Nav Canada control tower with, in the foreground, several CL-215 and Cl-415, a Nav Canada Challenger, and an Air Transat Airbus at the Quebec Jean-Lesage international airport (CYQB).
Nav Canada control tower with, in the foreground, several CL-215 and Cl-415, a Nav Canada Challenger, and an Air Transat Airbus at the Quebec Jean-Lesage international airport (CYQB).

On a stormy summer day, Air Canada called the Nav Canada flight information center (FIC) at the Quebec Jean-Lesage international airport (CYQB) on the Montreal frequency. The pilot was flying an Airbus and was about to take-off from the Montreal Pierre-Elliott-Trudeau international airport to Halifax, but there was violent weather that had to be avoided.

Normally, big airlines have their own briefing and flight planning services. However, rapidly changing weather sometimes requires last minute adjustments. In the case of the Air Canada flight, severe thunderstorms forbid a direct path from Montreal to Halifax.
The pilot was looking for the best option: go around the thunderstorms by flying north over Mont-Joli then eastward to Halifax or fly southward to United States then head east to Halifax.

Both solutions were possible but the objective was to pick the route that would diminish the pilot’s chances to have to divert to an alternate airport.

Radar imagery became the essential tool to propose a solution. Knowing the time lapse between two images, it was possible to evaluate the weather system’s speed. By calculating what was the distance left for the system to arrive in Halifax, and knowing the system’s speed, the flight service specialist (FSS) was able to estimate as precisely as possible the time when the thunderstorms would move over the destination airport.

The pilot having calculated the estimated time of arrival to Halifax for both the south and north routes, and now knowing at what time the weather system would be over Halifax, he understood that the best option was the southern route through United States. If there was no last minute modification in the system’s speed, he would be able to land in Halifax between twenty and thirty minutes before the first thunderstorm cells arrive over the airport.

It is fairly uncommon to receive an official feedback from the pilot of a big company like Air Canada. But the next day, surprising the flight service specialist (FSS), the pilot called back, presenting himself as the one who had made a flight from Montreal to Halifax the precedent day. He wanted to thank the FSS who had helped him in his decision making since, as he said it, the route via the United States had been a success and he was able to land his Airbus thirty minutes before the arrival of the thunderstorms. That kind of call certainly helps any employee to start a working day on the good foot…!

For more real life stories about being a FSS in Quebec City, click on the following link: Flight service specialist (FSS) in Quebec City

Categories
Real life stories as a flight service specialist (FSS): the Nav Canada flight information center (FIC) in Québec City

The Nav Canada flight information center (FIC) in Quebec City and the worker using dynamite

Thunderstorms in the Province of Quebec in 2012
Thunderstorms in the Province of Quebec in 2012

The Nav Canada flight information center (FIC) in Quebec City (CYQB) does not normally take calls from the general public since air traffic services are centered on the needs of pilots.

But a particularly urgent situation sometimes dictate a more flexible approach. I remember a telephone call we received on the 800 line, during a very hot summer day of 2007. A worker in charge of the installation of dynamite in a mine in the Abitibi region told the flight service specialist (FSS) that he was working for a big company and that an important blasting operation was to be undertaken soon. He was in the middle of the blasting site, having just completed the installation of the detonators and explosives on the whole area.

He was wondering if there could be something he did not know about the weather since there were very dark clouds coming his way. The flight information center FSS was aware of the meteorological situation in Abitibi, and it was certainly not appropriate for a blasting operation. The caller was told that gigantic thunderstorm cells were forming in his sector and that the lightning detectors were already recording hundreds of strikes.

His actual position, in the middle of detonators and dynamite, was certainly problematic, to say the least. Without asking anything else, he told us that he was getting out of the site quickly…

(Photo taken with a Canon 5D MKII)

For more real life stories about being a FSS in Quebec City, click on the following link: Flight service specialist (FSS) in Quebec City

Categories
Real life stories as a flight service specialist (FSS): the Nav Canada flight information center (FIC) in Québec City

A dust devil takes a pilot by surprise in Rouyn-Noranda

April 2013, at the Nav Canada Flight Information Center (FIC) in Québec City. This morning’s meterological forecasts indicate the possibility of dust devils. This type of obstacle to visibility is rare. The pilots call the flight service specialists (FSS) to know what “PO” means on the weather charts.

In spite of the calm winds and blue sky all over southern Quebec, the weather conditions can give birth to local wind shears. If they lift sand, dust or other small particles, those wind shears will become visible and cause dust devils five to ten meters in diameter.

A pilot would have to be unlucky to cross a rare dust devil. However, I remember an event I witnessed thirty years ago while I was working at the Transport Canada Rouyn-Noranda flight service station.

On a hot summer day, an aircraft landed in Rouyn-Noranda after a cross-country flight from Montreal. The pilot was making a short stopover to have his logbook stamped at the flight service station. The weather conditions were ideal at the airport: dry air, calm winds and a cloudless sky.

Once his run-up was completed on the taxiway, the pilot slowly headed for the runway 26 threshold. Once aligned and ready for take-off, he made the last few adjustments.

Few seconds later, the flight service specialists heard an emergency locater transmitter signal. Looking again at the runway, they saw that the aircraft was still on the threshold, but upside down.

A strong windshear had overturned the single-engine aircraft. The airport wind speed indicator being located farther away from the threshold only indicated calm winds.

The souvenir of this story reminded me that nature can always surprise the best prepared pilot. I imagine that this event shocked the student pilot as he tried, like us, to figure out what had just happened. I do hope that this adventure did not discourage him from flying.

For more real life stories about being a FSS in Quebec City, click on the following link: Flight service specialist (FSS) in Quebec City