Categories
Flight Simulation

A twin-engine BE-58 lands on an aircraft carrier.

A twin engine Baron Be-58 on approach for the aircraft carrier Gerald R. Ford
A twin engine Baron Be-58 on approach for the aircraft carrier Gerald R. Ford

Here’s a virtual flight made on a flight simulator using Microsoft Flight Simulator software. A Beech Baron BE-58 left Key West Airport, Florida (KEYW) a few minutes ago, heading for the CVN78 USS Gerald R. Ford aircraft carrier.   

In the real world, this just isn’t done. But in flight simulation, anything goes. Above, the aircraft completes the downwind leg of its approach to the carrier.

On stabilized final with full flaps and landing gear down, the focus is on the approach angle and stall speed, which stands at 73 knots.

Beech Baron Be-58 on final for the Gerarld R. Ford aircraft carrier
Beech Baron Be-58 on final for the Gerarld R. Ford aircraft carrier

You can’t rely on a cable to stop the plane, so you need the lowest possible speed and good brakes to land it on the 333-meter bridge. Below, the Beech attracts a little curiosity as it circulates to find temporary parking.

Taxiing to park the BE-58 on the aircraft carrier
Taxiing to park the BE-58 on the aircraft carrier

The virtual pilot then parks the aircraft for the next day.

Parked for the night on the CVN78 Gerald R. Ford
Parked for the night on the CVN78 Gerald R. Ford

The next two images show the aircraft carrier facing a storm the following evening, with winds blowing at 35 knots during a thunderstorm. On deck, the first aircraft on the left is our Baron Be-58, holding its own. If the storm doesn’t blow it overboard, the military will soon!

The aircraft carrier CVN 78 Gerald R. Ford in a storm
The aircraft carrier CVN 78 Gerald R. Ford in a storm
The aircraft carrier Gerald R. Ford near Key West
The aircraft carrier Gerald R. Ford near Key West

Click on the link for other challenging virtual flights on my blog.

Categories
Flight Simulation

Grosse-Île airstrip and MSFS 2020.

Close-up view of the Grosse-île runway and the area with the Microsoft flight simulator (MSFS 2020).
Close-up view of the Grosse-île runway and the area with the Microsoft flight simulator (MSFS 2020).

It took the Microsoft Flight Simulator (MSFS 2020) for me to discover this landing strip on Grosse-Île. Even the Canada Flight Supplement (CFS) from Nav Canada does not mention it.

Decades ago, Canadian authorities used this island in the middle of the St. Lawrence River as a quarantine site for immigrants arriving in Canada. Many Irish people, among others, made an obligatory stop on this strip of land before being allowed to continue their journey to Canada.

At one time, a section of the island was reserved for Canadian and American researchers for their top secret research on Anthrax.The most amazing thing about reading the article is realizing that the entire production of this bacteriological weapon (439 liters) was mixed with formaldehyde and put in barrels that were dumped somewhere in the St. Lawrence River when it was decided that it would no longer be useful, as the Second World War took a turn in favor of the Allies. It seems to me that formaldehyde does not prevent barrels from rusting, but hey… back to the point.

Today, tourists can visit Grosse Île and the Irish Memorial National Historic Site during the summer months using the services of Croisières Lachance, located in Berthier-sur-Mer.

Where is Grosse-Île located? In the province of Quebec, a little east of Quebec City. It is one of the many islands that you can fly over once you have left Île d’Orléans behind. Below, a screenshot from Google Maps.

Grosse-Île in Quebec on Google Maps.
Grosse-Île in Quebec on Google Maps.

The satellite image below clearly shows that this is not an invention. Microsoft designates this runway as CYMN Montmagny: a mistake that one can easily live with, since by giving an official code to this Grosse-Île runway, the pilot can use it as a navigation point in his GPS.

Satellite view of Grosse-Île and its runway.
Satellite view of Grosse-Île and its runway.

So, let’s use a small Cessna in US Coast Guard colors to make a virtual flight from Quebec City airport (CYQB) to Grosse-Île (CYMN). It was a bit chilly on this February day in Quebec City, so I decided to transport us to July for this flight, adding a few cumuliform clouds in the process.

Leaving Quebec City for Grosse-Île with MSFS 2020.
Leaving Quebec City for Grosse-Île with MSFS 2020.

This short flight will allow us to fly over Île d’Orléans, Île Madame (owned by Laurent Beaudoin, former major shareholder of Bombardier), Île au Ruau  (purchased in 2019 by the rich owner of the Gildan empire) to finally arrive at Grosse-Île.

Approaching Grosse-Île over the St Lawrence Seaway with the MSFS 2020 flight simulator.
Approaching Grosse-Île over the St Lawrence Seaway with the MSFS 2020 flight simulator.

The picture below shows the aircraft on a right base for the Grosse-Île runway. I do not know the official dimensions of this dirt airstrip, but it can easily accept a Cessna aircraft such as ours.

Cessna in base for the Grosse-Île runway with the MSFS 2020 flight simulator.
Cessna in base for the Grosse-Île runway with the MSFS 2020 flight simulator.

Below, the aircraft is on final for the runway.

On final for the Grosse-Île runway.
On final for the Grosse-Île runway.

A final screenshot shows the Cessna taxiing down the runway after landing. As you can see, the runway can accommodate much larger aircraft. If you want to make a real flight to this island, find out beforehand about the condition of the runway and the restrictions surrounding its use by visiting pilots.

Cessna aircraft on Grosse-Île after the landing.
Cessna aircraft on Grosse-Île after the landing.

Click on the link for more flight simulation experiences on my blog.

Categories
Flight Simulation

Short Landings in Flight Simulation with MSFS 2020

On approach for Île d'Orléans.
On approach for Île d’Orléans.

Today’s flight consists of two virtual short landings using the MSFS 2020 flight simulator (or as some call it, FS2020). We will be landing on Île d’Orléans and on the Battlefields Park.

First of all, I admit that the Cessna 170B’s windows are dirty. For realism, the designer Carenado left a little dirt here and there to show the wear and tear of this very old aircraft.

The picture above shows Île d’Orléans as seen from the Cessna. Since there is no landing strip but a golf club in the area, we will use the open fairways to land the aircraft. If there is a golfer on the course, I will open the window and yell, as is customary, “Fore!” (Falling Object Returning to Earth).

On final for Île d'Orléans
On final for Île d’Orléans

We are established on final for the small portion of open ground ahead. With 40 degrees of flaps, the stall speed is particularly low and the landing should not be too difficult.

On Île d'Orléans ready for take-off.
On Île d’Orléans ready for take-off.

Although the available strip was not very wide, it was long enough for the landing, the taxiing and the maneuvering to turn the aircraft 180 degrees for its take-off to Quebec City.

Airborne from Île d'Orléans with a Cessna 170B
Airborne from Île d’Orléans with a Cessna 170B

Back in the air, direction Quebec City. The take-off on soft ground requires about 20 degrees of flaps.

Enroute towards Quebec City.
Enroute towards Quebec City.

Quebec City is in sight. In the Cessna C-170B I flew in 1981 across Canada from St-Jean-sur-Richelieu to Edmonton, Alberta, there was no modern navigation aid installed on board as in the photo above, where the GPS helps the pilot find his way. The flight was flown using 14 VFR charts and nothing more. (If you are interested, click to read more about real-life flying stories on my blog).

Hôtel le Concorde and its revolving restaurant, visible on the right.
Hôtel le Concorde and its revolving restaurant, visible on the right.

We are now above the Plains of Abraham. On the picture above, on the right, you can see the Hotel le Concorde and its revolving restaurant. We will possibly disturb the quiet atmosphere of the meal as we fly by…

The MNBAQ and the Battlefields Park are in sight.
The MNBAQ and the Battlefields Park are in sight.

Above, straight ahead, the gray buildings represent a portion of the Musée National des Beaux-Arts de Québec (MNBAQ). A little further on is the open area of the Battlefields Park. In 1928, Lindbergh landed on that field to bring badly needed medicine for his friend Floyd Bennett. Can we normally land on the Battlefields Park, in the heart of Quebec City? Of course not. But that’s the beauty of a flight simulation; you can do whatever you want!

Cessna 170B on the Battlefields Park in Québec City.
Cessna 170B on the Battlefields Park in Québec City.

Once landed, the aircraft is allowed to decelerate gradually and then turned 180 degrees for the next takeoff. When winds are light, there is no need to worry about the direction of the takeoff.

Aerial view of Battlefield Parks with the Cessna 170B under MSFS 2020.
Aerial view of Battlefield Parks with the Cessna 170B under MSFS 2020.

Above, an aerial view of the Battlefields Park, with the virtual Cessna C-170B ready to take off again.

Partial view of Quebec City in flight simulation with MSFS 2020
Partial view of Quebec City in flight simulation with MSFS 2020

One last picture, this time with some additional buildings. The realism of the virtual scene with FS2020 is amazing!

I hope you enjoyed these two short flights. Whether you use the short landing technique for the Battlefields Park is really up to you, as there is enough space for a normal landing. But it is good to practice landing in the shortest distance possible. You never know when your engine will quit!

You can click on the following link for other challenging virtual flights   on my blog.

Categories
Flight Simulation

Virtual flight with the MSFS 2020 flight simulator.

Taking of from Rivière des Mille-Îles near Marina Venise
Taking of from Rivière des Mille-Îles near Marina Venise

Today’s flight is part of my blog’s standard virtual flight category. The take-off is from the Mille-Îles River in Quebec. There will be a touch and go at Mirabel (CYMX) and a flight over Quebec and Ontario to the Cascades hydrobase (CTY3).

Towards the Mirabel international airport (CYMX) with the MSFS 2020 flight simulator.
Towards the Mirabel international airport (CYMX) with the MSFS 2020 flight simulator.

Flying at low altitude towards Mirabel airport, for a touch and go.

The Mirabel (CYMX) runway is in sight.
The Mirabel (CYMX) runway is in sight.

One of the CYMX runways can be seen straight ahead. If a virtual pilot does not find the runway long enough to do a touch and go, then a refresher course is in order.

Touch and go at the Mirabel airport with MSFS 2020
Touch and go at the Mirabel airport with MSFS 2020

Takeoff from Mirabel. This is the advantage of an amphibious aircraft; you can land anywhere.

The virtual weather shows the difference between the snow in the north and the green vegetation in the south.
The virtual weather shows the difference between the snow in the north and the green vegetation in the south.

The Lachute airport (CSE4) is visible (buildings in red in the foreground). Flying in April in Quebec allows to notice the demarcation between the still white landscapes (the snow persists) in the north and the areas where everything has already melted.

Over Hawksbury, Ontario, with the MSFS 2020 flight simulator.
Over Hawksbury, Ontario, with the MSFS 2020 flight simulator.

The flight continues to the Cascades waterbase (CTY3). The Ottawa River separates Quebec from Ontario. The aircraft is currently over the town of , Ontario, with Hamilton Island on the left.

Realism of the flight simulation under MSFS 2020
Realism of the flight simulation under MSFS 2020

The screenshot above shows the very realistic effect of the virtual landscape, both in terms of the virtual weather, the multiple color tones of the ground and the shading on the ground and on the aircraft caused by the breaks between the clouds.

Overflying the Plaisance National Park in Quebec with MSFS 2020
Overflying the Plaisance National Park in Quebec with MSFS 2020

Above Parc national Plaisance, a Quebec property.

Visibilty lowers slightly near Gatineau (CYND)
Visibilty lowers slightly near Gatineau (CYND)

Descending for 1500 feet. Near Gatineau, the weather conditions deteriorate slightly. But it will be short-lived.

Turning towards the Gatineau river with the MSFS 2020 flight simulator.
Turning towards the Gatineau river with the MSFS 2020 flight simulator.

Right turn for a water landing on the Gatineau River. The destination is in sight.

Water landing of the Gatineau river near the Wakefield hydrobase (CTY3)
Water landing of the Gatineau river near the Wakefield hydrobase (CTY3)

The plane progresses slowly towards the hydrobase.

Aerial view of the Wakefield hydrobase (CTY3) with MSFS 2020
Aerial view of the Wakefield hydrobase (CTY3) with MSFS 2020

There is not yet a virtual waterbase worthy of the name for Cascades under Microsoft. At low altitude, the virtual pilot notes that he is only flying over a photo with aircraft footprints. An aerial view shows the CTY3 hydrobase.

Those who wish to repeat the experience will find the ride quite interesting.

Click on the link for more standard virtual flights on my blog.

Categories
Flight Simulation

The Bugalaga runway (WX53) in Indonesia with MSFS 2020

Bugalaga airstrip in Indonesia photographed by Nico Sanchez
Bugalaga airstrip in Indonesia photographed by Nico Sanchez

Takeoffs and landings on the Bugalaga runway (WX53) in Indonesia can be classified as being in the challenging virtual flight category. The runway is not extraordinarily demanding, due to its comfortable size of 1478 feet by 75 feet. But the approach still requires more skill than a standard approach, especially with the trees on final and the steep slope.

Today’s flight with the MSFS 2020 flight simulator consists of taking off and landing on this sloping runway. To add to the fun, the flight must be done during adverse weather conditions. Indeed, the thunderstorms programmed in the virtual weather system complicate the task of the virtual pilot, as he has to deal with gusty winds and mechanical turbulence. And to add to the fun, the Pilatus normally used is replaced by a Cessna Grand Caravan 208B. The photo above represents the Bugalaga runway in reality.

View of the Bugalaga (WX53) sloped airstrip using MSFS 2020 flight simulator.
View of the Bugalaga (WX53) sloped airstrip using MSFS 2020 flight simulator.

Above is the virtual graphic interpretation of this runway located at 6233 feet above sea level (MSL) with the Cessna ready to take off. Asobo (Microsoft) did a good job.

Cessna Grand Caravan 208B ready for departure at Bugalaga airstrip with MSFS 2020
Cessna Grand Caravan 208B ready for departure at Bugalaga airstrip with MSFS 2020

The visibility could be better, but it does not prevent the aircraft from taking off on runway 06.

Cessna Grand Caravan 208B airborne from the Bugalaga sloped airstrip (WX53) using MSFS 2020 flight simulator
Cessna Grand Caravan 208B airborne from the Bugalaga sloped airstrip (WX53) using MSFS 2020 flight simulator

As you can see, the margin of error is pretty small for this aircraft that is less efficient than the Pilatus normally used in reality.

Mountains around the Bugalaga airstrip during a thunderstorm using MSFS 2020.
Mountains around the Bugalaga airstrip during a thunderstorm using MSFS 2020.

Immediately after takeoff, preparation begins for the outbound procedure and the 180 degrees turn that will put the aircraft on final for runway 24. The surrounding mountains require the pilot’s full attention.

Cessna Grand Caravan 208B approaching the Bugalaga airstrip in flight simulation.
Cessna Grand Caravan 208B approaching the Bugalaga airstrip in flight simulation.

Acceptable visibility but strong winds characterize the approach to Bugalaga.

The Bugalaga virtual sloped airstrip is visible in the distance in the mountains.
The Bugalaga virtual sloped airstrip is visible in the distance in the mountains.

Runway 24 is now visible in the mountains.

On final at 82 kts for the Bugalaga sloped airstrip (WX53) using MSFS 2020
On final at 82 kts for the Bugalaga sloped airstrip (WX53) using MSFS 2020

The approach speed with flaps out is about 82 knots.

Touching down on rwy 24 on the Bugalaga sloped airstrip using MSFS 2020
Touching down on rwy 24 on the Bugalaga sloped airstrip using MSFS 2020

The Cessna Grand Caravan C208B is about to touch down. You can see the steepness of the runway, which gets even steeper towards the end.

Cessna Grand Caravan 208B keeping enough speed to climb the sloped airstrip at Bugalaga in Indonesia (MSFS 2020)
Cessna Grand Caravan 208B keeping enough speed to climb the sloped airstrip at Bugalaga in Indonesia (MSFS 2020)

Once the aircraft has touched down, the virtual pilot must maintain enough speed to climb the hill at the end of the strip.

Cessna Grand Caravan 208B after landing in Bugalaga in flight simulation.
Cessna Grand Caravan 208B after landing in Bugalaga in flight simulation.

A last screen capture shows the aircraft having crossed the last hillock at the end of runway 24. The flight is short, but requires your full attention. Good luck to those who will try the experience!

Click on the link for more challenging virtual flights on my blog.

Categories
Flight Simulation

Challenging virtual flight in Idaho using MSFS 2020

MSFS 2020 map for the flight 3U2 to C53 in United States
MSFS 2020 map for the flight 3U2 to C53 in United States

The challenging virtual flight is from Johnson Creek Airport (3U2) to the Lower Loon Creek Airstrip (C53) in the United States, using the MSFS 2020 flight simulator. The software map shows the type of aircraft chosen, a CubCrafters X Cub on floats, as well as the trajectory over the Idaho mountains.

The idea of using an amphibious aircraft for this flight is a bit far-fetched, but the goal is to make the pilot’s job a little more difficult by adding weight to the aircraft.

Johnson Creek (Yellow Pine) airport 3U2 with MSFS 2020
Johnson Creek (Yellow Pine) airport 3U2 with MSFS 2020

Johnson Creek Airport (3U2) is a creation of Creative Mesh. It is charming, with tents here and there planted near the planes. The runway is 3480 feet long by 150 feet wide. It is oriented on a 17/35 axis and still quite high at 4960 feet above sea level (MSL).

Amphibian CubCrafters X Cub ready for departure at the Johnson Creek 3U2 virtual airport with MSFS 2020.
Amphibian CubCrafters X Cub ready for departure at the Johnson Creek 3U2 virtual airport with MSFS 2020.

Given the departure altitude, one must not forget to adjust the air/fuel mixture so as not to lose power on takeoff, especially since there is a mountain at the end of the runway and the floats increase the weight of this small aircraft. The air is also thinner as the flight takes place in summer and at a high altitude; this represents another obstacle to the aircraft’s performance.

Avoiding obstacles after take-off from the 3U2 Johnson Creek virtual airport using MSFS 2020.
Avoiding obstacles after take-off from the 3U2 Johnson Creek virtual airport using MSFS 2020.

The mountains near the runway present a significant obstacle. The virtual pilot must use the best possible angle of climb without worrying about the route recommended by the GPS. The flaps are kept slightly extended during the initial climb.

Flying over the Idaho mountains in flight simulation with MSFS 2020.
Flying over the Idaho mountains in flight simulation with MSFS 2020.

Once at a safe altitude and back on the GPS suggested route, the view of Idaho’s spectacular mountains is more enjoyable. Throughout the climb, the air-fuel mixture and altimeter (“B” on MSFS 2020) have to be adjusted.

CubCrafters X Cub floatplane over the Idaho mountains in flight simulation MSFS 2020
CubCrafters X Cub floatplane over the Idaho mountains in flight simulation MSFS 2020

An altitude of almost 10,000 feet ASL makes it possible to fly over the mountains without risk of collision.

Descending in the valley towards the ID8 Marble Creek airport in Idaho in fligh simulation.
Descending in the valley towards the ID8 Marble Creek airport in Idaho in fligh simulation.

At the right moment, when the small surrounding airports and the river appear on the GPS, we leave our GPS road, until now in straight line, and we align in the valley to fly over the river until our destination, avoiding the surrounding mountains. In the photo above, the descent has already begun, with a necessary gradual adjustment of the air-fuel mixture.

Flying over the (ID8) Marble Creek airport in Idaho using the MSFS 2020 flight simulator.
Flying over the (ID8) Marble Creek airport in Idaho using the MSFS 2020 flight simulator.

We fly over a first small airport. The picture above shows the planes parked on the runway of Marble Creek airport (ID8), which dimension is 1160 x 20 feet. For those which would be interested in trying a landing there, the orientation of the runway is 03/21 and the altitude of 4662 feet MSL.

Flying over the 2U8 Thomas Creek Airport in Idaho using the MSFS 2020 flight simulator.
Flying over the 2U8 Thomas Creek Airport in Idaho using the MSFS 2020 flight simulator.

On the way towards our final destination, we also fly at low altitude over the Thomas Creek (2U8).

Following the river towards the C53 Lower Loon Creek airstrip using the MSFS 2020 flight simulator.
Following the river towards the C53 Lower Loon Creek airstrip using the MSFS 2020 flight simulator.

The mountains on either side of the river require close attention, as the poor performance of a small aircraft equipped with floats does not allow for easy correction of navigational errors.

By the time the runway suddenly becomes visible, the plane will not be on course but 90 degrees off the ideal course. It will be necessary to quickly turn left into the valley, make a fairly sharp 180-degree turn to the right to avoid the mountains, and then get back on course to land. It is only at this point that the landing gear will be extended.

On final for Lower Loon Creek airstrip with MSFS 2020
On final for Lower Loon Creek airstrip with MSFS 2020

The photo above shows the aircraft on final for the Lower Loon Creek dirt and grass runway (C53). It is located at 4084 feet MSL and is only 1200 feet long by 25 feet wide. Note that the approach should be made on runway 16 when possible.

Amphibian CubCrafters X Cub rolling down the C53 Lower Loon Creek airstrip in Idaho after landing.
Amphibian CubCrafters X Cub rolling down the C53 Lower Loon Creek airstrip in Idaho after landing.

As always, a stabilized aircraft on final makes landing easier, regardless of the conditions.

Amphibian CubCrafters X Cub parked at the C53 Lower Loon Creek airstrip using MSFS 2020 flight simulator.
Amphibian CubCrafters X Cub parked at the C53 Lower Loon Creek airstrip using MSFS 2020 flight simulator.

We park the plane and rest a bit. Today, there is no one else here. But that’s not always the case in real life, as this video of a landing at Lower Loon Creek shows it.

Click on the link for more challenging virtual flights on my blog.

Categories
Flight Simulation

Virtual flight around Key West with MSFS 2020

The Key West (KEYW) virtual airport by FSDreamteam for the MSFS 2020 flight simulator.
The Key West (KEYW) virtual airport by FSDreamteam for the MSFS 2020 flight simulator.

This is the Key West Airport (KEYW) in Florida, as reproduced for flight simulation by FSDreamteam for the Microsoft MSFS2020 flight simulator.

There is a clear advantage to acquiring this virtual airport rather than using the MSFS2020 airport. Indeed, the FSDreamteam KEYW airport doesn’t come alone: the company offers two other sites in accompaniment and for the same price: Fort Jefferson and the Loggerhead lighthouse.

A small virtual flight with a Cessna C-172 on floats allows you to fly over these sites and land on the water when appropriate.

Airborne from Key West KEYW with the MSFS 2020 flight simulator.
Airborne from Key West KEYW with the MSFS 2020 flight simulator.

The Cessna takes off from Key West under ideal weather conditions.

Part of the Key West Wildlife National Refuge using MSFS 2020
Part of the Key West Wildlife National Refuge using MSFS 2020

Shortly after takeoff and established at 3000 feet, we fly over the Key West National Wildlife Refuge.

Descending towards Fort Jefferson with MSFS 2020
Descending towards Fort Jefferson with MSFS 2020

The Garmin G-1000 allows a stable flight during screen captures.

Flying over Fort Jefferson in Key West with MSFS 2020.
Flying over Fort Jefferson in Key West with MSFS 2020.

This is Fort Jefferson photographed as the Cessna flies at about 1500 feet ASL. The winds have increased slightly and foam is becoming visible on the waves.

Flying over Loggerhead Lighthouse in Key West using thge MSFS 2020 flight simulator.
Flying over Loggerhead Lighthouse in Key West using thge MSFS 2020 flight simulator.

A little further along the flight path is the Loggerhead Lighthouse. The beach is beautiful and gently sloping. It will be possible to do a water landing, put the landing gear down while on the water and then park on the beach.

Making a sea-landing by Loggerhead Lighthouse in Key West, with MSFS 2020.
Making a sea-landing by Loggerhead Lighthouse in Key West, with MSFS 2020.

The landing is done without too much difficulty.

On the beach at Loggerhead Lighthouse, in Florida, using MSFS 2020.
On the beach at Loggerhead Lighthouse, in Florida, using MSFS 2020.

With a little engine power, it is possible to get out of the water and park on the beach for a while. After turning off the engine, the MSFS2020 flight simulator allows the pilot to listen to the sound of the waves and wind in a realistic way. If there are birds in the area, it will also be possible to hear them.

For those who want to repeat the experience, it is only a matter of programming the starting point in MSFS2020 as KEYW and the destination KYW1 (Fort Jefferson). Once through Fort Jefferson, continue straight for a few minutes and you’ll arrive at the Loggerhead Lighthouse. Take a few moments to relax and listen to the waves before taking off again…!

Click on the link for more standard virtual flights on my blog using either MSFS2020 or FSX.