Photography, aviation and flight simulation - Photography, aviation and flight simulation

Real life stories as a flight service specialist (FSS): Inukjuak FSS

Enroute to the first posting: Inukjuak

Post author By Stanley
Post date 23 November 2014

(Precedent story: flight service and the Transport Canada Training Institute in Cornwall)

1982 Northern Quebec view from a Nordair B737

Summer of 1982. Today is the departure from Montreal towards Inukjuak (CYPH), a northern Quebec Inuit village, part of the Nunavik. There, I will start working as a flight service specialist (FSS) for Transport Canada. Nordair’s Boeing B737 takes off and immediately heads northward. It will fly along James Bay and, upon reaching Hudson Bay, will land in Kuujjuarapik, its final destination. From there, an Austin Airways’s Twin Otter will take us over to Inukjuak , an isolated posting further to the north on the east coast of Hudson Bay.

A Boeing B737 landing on the Kuujjuarapik (CYGW) 5000 feet gravel runway uses special procedures. This is a short runway for a loaded aircraft, and braking is less effective than on asphalt. There is no significant margin for error. The wheels must touch as close as possible to the runway threshold, followed by maximum breaking. Passengers really feel the deceleration. The same calculation applies for takeoff: the pilot positions the aircraft close to the runway threshold then applies both the brakes and maximum thrust, and once the appropriate parameters are reached , releases the brakes. As usual, weight and balance, density of the air, airport altitude as well as direction and strength of the winds are all precisely calculated for the aircraft to be airborne before the end of the runway.

1982 Kuujjuarapik. A Nordair Boeing B-737 in the foreground and an Austin Airways Twin Otter in the background.

1982 A flight service specialist (FSS) working at the Kuujjuarapik station, in Québec

After a short stopover, the Twin Otter is now ready for the trip to Inukjuak. The takeoff from Kuujjuarapik goes without problems. I am sitting in the first class section, behind some cargo held by a net. For champagne, I will have to wait for the boxes to be removed from the hallway.

1982 Cargo and passengers in the Twin Otter

1982. A view of Sanikiluaq from an Austin Airways Twin Otter.

Then a slow descent is started to Inukjuak. From my window, I can see a small group of narwhals. I feel like I’m dreaming but, after a quick research in scientific documents, learn that narwhals can be found in small groups mainly in the north of Hudson Bay.

The aircraft is now getting closer to Inukjuak. The flaps are extended and it is possible to see the runway before the airplane turns on final. It is two thousand feet long and made only of sand thick enough to render its surface unstable.

1982 Austin Airways Twin Otter on base for the Inukjuak airport runway

Upon arrival, someone comes my way with a motorcycle. He offers me a ride to the staff-house, even if there is only a fifteen or twenty seconds walk. I politely declined the offer, but the personage insists. Not wanting to give a bad impression just as I arrive, I finally accept and try to find a small place on the seat of his tiny motorcycle. Hardly have we started to move into the soft sand that the driver loses control of the vehicle. We fall (what a surprise!), but there is no serious consequence. Welcome to Inukjuak!

1982 Inukjuak inhabitant and canoes used for traditional activities

C170B C-GGPI in Inukjuak, Quebec, in 1982

For more real life stories of a FSS in Inukjuak, click on the following link: Flight service specialist (FSS) in Inukjuak

Photography

A tulip in the parc du Bois-de-Coulonge

Post author By Stanley
Post date 20 November 2014

A tulip in the Bois-de-Coulonge, Québec City.

This flower is part of the new pictures added in the “Photo galleries” section. The photo was taken during spring 2012 in the parc du Bois-de-Coulonge, in Québec, with a Canon 5D MKII. I include the technical details, for the photographers who could be interested: speed 1/80 sec., aperture 5.0, ISO 100, focal 110.0 mm, Mode WB auto, Mode AF Autofocus One-Shot, lens Canon 70-200 mm F2.8L IS II USM, RAW file. There were other tulips all around but I chose to isolate one flower for maximum effect.

Tags Bois-de-Coulonge, Canon 5D MKII, Canon 70-200 f2.8L IS II USM, flower photography, photo, tulip

Human behavior Updates

The Basic Laws of Human Stupidity

Post author By Stanley
Post date 18 November 2014

Looking at the title, we imagine that this book is either cynical or humorous. Anticipating the reader’s reaction, the author quickly announces where he stands: “These pages are actually the result of a constructive effort to detect, understand and perhaps neutralize one of the most powerful dark forces that impede welfare and happiness of mankind.”

Written by Carlo M. Cipolla and originally published in English in 1976, this little book became an international bestseller when published in 1988 in Italian, his native language, and integrated into a bigger publication called Allegro ma non troppo.

The book contains five basic laws of human stupidity. Each is outlined and explained. In order to take the analysis one step further, the author explains the method he uses to qualify a person’s actions. It is obvious that all may not agree with the author. The same thing happens with subjects like religion or politic. These are sensitive issues.

Distribution of stupidity

I will mention only the first law that sets the tone of the book :[My translation]: “Everyone inevitably always underestimates the number of stupid persons existing in the world.“

All men are not equal: some are stupid and others are not. Culture, race, social class, education, wealth or where you live has nothing to do with the case. Nature randomly decides. Stupidity is shared equally between men and women and uniformly distributed in a constant proportion.

The four major categories

The author divides humanity into four broad categories: idiots, intelligent people, bandits and stupid people. He considers that the most dangerous category is the one that relates to stupidity. These persons show a consistency to inflict losses to others while making no gain themselves through their own actions. In fact, most of the time, they suffer losses.

Impact on society

The degree of danger of the stupid person is function of the genetic combination (the dose of stupidity received at birth!) and the power he holds in society: [My tranlation]:” Stupid people cause losses to others without personal gain consideration. Society as a whole is impoverished.” There is more damage inflicted to society if the stupid actions are the result of a high ranking individual.

In a desire to protect the reader against associating with a stupid person, the author writes: [My translation]: ” You always hope to manipulate stupid people, and it is often achieved, to a certain extent. But because of the erratic side of their behavior, we cannot predict all the actions and reactions of stupid people and we find ourselves very quickly pulverized by the unpredictable decisions of the stupid associate.“

Composition of the population of a country on a downward slope

The final microanalysis attempt to present the composition of individuals in a country that is on a downward slope. The author believes that the percentage of stupid persons is always equal to the proportion found in countries that are on the rise. The difference is instead found in the increasing number of people being found in 1) the category of bandits with a stupid trend (those who get a minor gain while inflicting major losses to others) and 2) a similar increase in the number of idiots in this country (those who cause losses to themselves by constantly generating gains for others).

One positive effect to read and understand this book

This book is likely to reconcile yourself with the past by allowing you to put a final qualifier on the actions of one or more individuals who may have caused you problems while making no serious gain and, eventually, who suffered significant setbacks due to their inappropriate actions and behaviour toward you.

Bonus

Four blank grids are provided at the end of the book to allow the reader to put a qualifier on the actions of persons of his choice.

Original title: The Basic Laws of Human Stupidity
©1988 Società editrice Il Mulino, Bologna
©2012 Presses Universitaires de France
ISBN 978-2-13-060701-4

Tags bandits, Basic Laws of Human Stupidity, bestseller, books, Carlo M. Cipolla, culture, education, human behaviour, human race, humanity, idiots, intelligent people, social classes, stupid people, stupidity, unpredictable behaviour, wealth

Screen captures

A virtual FedEx MD-11 from PMDG

Post author By Stanley
Post date 14 November 2014

FedEx MD11 in flight (FSX). This virtual aircraft is made by PMDG.

The MD-11 is an extremely interesting aircraft with regards to its characteristics but many pilots have had problems to master all its interesting features in real life. It’s partly for that reason that there has been many crashes with this type of aircraft. Considering the MD-11 high fuel consumption, FedEx will progressively start selling them, starting 2015. The only company in the world still using the MD-11 to carry passengers is KLM (edit: it did the last flight with passengers in 2015). The MD-11 is remembered for the Swissair 111 crash, near the coast of Nova-Scotia, on Septembre 2nd, 1998. It was flying the New-York to Geneva leg when the accident happened: 229 persons perished when the aircraft plunged into the sea.

The above screen capture has been edited to give it a more realistic effect and to emphasize the quality of light at dusk. Different images, under many company colors, can be found on this website under the « flight simulation” category, within the ” virtual pictures » section. A flight from Mexico City Intl to Denver Intl will soon be included in the « challenging virtual flights » section. Have a good visit!

Tags airplane crash, challenging virtual flights, FedEx, flight simulation, FSX, MD-11, screen captures, virtual flight

Real life stories: flight service and Transport Canada Training Institute

The flight service specialist training at the Transport Canada Training Institute in Cornwall, Ontario.

Post author By Stanley
Post date 12 November 2014
4 Comments on The flight service specialist training at the Transport Canada Training Institute in Cornwall, Ontario.

(Precedent story: the flight instructor license)

View of a small portion of the Transport Canada Training Institute in Cornwall, Ontario, in 1982

In the early 80s, the oil crisis forces airlines to greatly limit hiring. This was not the case during our pilot training course but becomes a reality when applying for a job a year later.

However, on the government side, the situation is quite different. The air traffic services branch of Transport Canada is looking for new employees to replace staff approaching retirement age. The only option immediately accessible to me is to apply as a flight service specialist (FSS). I have only a rough idea of what are the responsibilities, nothing more. But the pay and advantages are far better than what is otherwise available to a new flight instructor. It is time to send in an application.

For the Province of Quebec, two written examinations totally unrelated with aviation are held at the University of Quebec in Montreal. There are 1500 candidates (5 sessions of 300 applicants) who attempt these tests during the two days allotted for the first phase of the selection process. In the following weeks and months, those who have succeeded in the written tests must then undergo anything from personal interviews to language tests, medical examinations and security clearances.

We are now three candidates from Quebec heading towards the Transport Canada Training Institute in Cornwall. There will be thirty-five hours of theoretical and practical course per week, over a six months period. The pressure will be continuous and desired in order to eliminate candidates who may not react well to stress.

We will be paid to study. A candidate is guaranteed with a posting upon completion of training, providing he manages to obtain 80% and above on the written and practical evaluations. Because this 82-01 course is not dedicated to Quebecers only, it cannot be offered in French. So it is going to be in English only, and will include twenty-four students from almost all Canadian provinces.

The Transport Canada Training Institute in Cornwall is nothing short of exceptional for those who have decided to study and succeed.

In order to help the student to deal with the weekly thirty-five hours of courses and examinations, the school provides interesting amenities.Each student has a private room with daily maid service. The cafeteria offers a good choice of meals. Calories can be burned at the pool, gym, weight room, on the tennis court or on the baseball field. A snack bar remains open for late-night cravings. A bank teller is made available to students, as well as a hairdressing salon, a bar, arcade games, pool tables, etc.

Transport Canada Training Institute weight room. Cornwall, Ontario 1982

1982 TCTI, Cornwall. Students from the FSS 82-01 group are experimenting a new way to improve scoring at basketball.

So that we understand what lies ahead, we are told that there are traditionally many students in each class who will not keep pace and will be sent home, despite their efforts. For a francophone who wasn’t using a second language on a daily basis , it is clear that integrating new theory presented in English for seven and a half hours every day, five days a week, becomes demanding. I compensate for the times when my attention decreases by studying in the evening.

There is a library in the school as well as multiples rooms for flight simulators designed for every career considered by the students.

1982 Cornwall TCTI Flight Simulation Room

1982 TCTI Cornwall. Environment Canada upper air building.

In the courtyard, there is a peacock and other small animals and a water source flows into a very well planned landscape.

The amenities are simply stunning. The message is clear: “Transport Canada only ask you to study and succeed, it will take care of the rest.”

1982 Cornwall TCTI corridors to classrooms

Finally, the moment we were all waiting for as arrived. Students who managed to get through the course celebrate their graduation.

Assignments are distributed. Those who will be working in isolated postings, in northern Quebec, are well aware that the schedule does not include holidays. The FSS will be on duty every day. The new employee will be compensated for overtime and a more expensive cost of life. He will also benefit from subsidized rents.

My departure is planned shortly for Inukjuak (CYPH), along the east coast of Hudson Bay in the Nunavik. Life will soon change radically.

(Next story: enroute to the first posting: Inukjuak)

Updates

Update November 9, 2014

Post author By Stanley
Post date 9 November 2014

Hello,

Here is a quick update regarding some additions of the last few weeks. Of course I continue to publish “the real stories as pilot and FSS” (so far 7 have been published out of 80). The most improved section is the photo gallery of the Canadian provinces (at least 30 pictures have been added). In the virtual flights section, I’ve added a flight with a glider (in the standard flights) and a flight with an helicopter landing on a cruise ship (challenging flights section). Coming soon, a little review on a surprising book: “The basic laws of human stupidity”. Here are three of the recently added pictures. Have a good visit!

Empress Hotel at dusk, Victoria Harbor, Canada 2014

Photoshop edition of a house, Fisherman's Wharf, Victoria, Canada 2014 — Photoshop edition of a house, Fisherman’s Wharf, Victoria, Canada 2014

Photo of a part of Banff downtown, Alberta, Canada 2014

Tags Alberta, Banff, British-Columbia, challenging virtual flights, Empress Hotel in Victoria, photo, the basic laws of human stupidity, Victoria Harbour

Real life stories as pilot and FSS: learning how to fly

The Flight Instructor License

Post author By Stanley
Post date 5 November 2014

(Precedent story: the flight from St-Jean-sur-Richelieu to Edmonton)

In order to accumulate flying hours, I needed to become a flight instructor. The course was undertaken and my license obtained, after successful written and flying exams. Already having logged enough flying hours as pilot in command, I was able to receive a Class 3 license immediately. Technically, this meant that I did not have to receive permission from a chief instructor before I authorized a student to fly alone for the first time.

In order to study certain maneuvers with the greatest possible accuracy that I would have to teach, I sometimes practiced unusual flying exercises. This meant I needed to check the behavior of the aircraft if a student mishandled the controls before I could correct him. With enough altitude, you could afford a fair amount of improvisation.

So I decided, during one of these specific exercises, to simulate a student who had inverted the maneuvers required to stall an aircraft and bring it to a spin. The plane turned completely upside down and I heard noises indicating that the stress on the structure was possibly important. Needless to say, I decided to abandon some experiments, realizing that it was quite possible that certain leased aircraft had previously been engaged in similar exercises. We all want to end a flight with our aircraft intact…

A group of flight instructors working in St-Jean-sur-Richelieu in 1981

At the St-Jean-sur-Richelieu flying club, we were now eleven certified instructors. However, the number of new students was stagnating in the economic uncertainty of the late 70s to early 80s. A global recession was raging and unemployment soaring. Some airlines went bankrupt, others were freezing the hiring of new pilots. Eleven instructors in the same flying club was a lot for so few customers. The pay was meager.

Among the students I trained during the period when I was a flight instructor, the first to successfully fly solo was an Egyptian. He arrived in Quebec with a group of a dozen compatriots. Their ambition was to receive all of their training in Quebec and return to Egypt as pilots for the national carrier EgyptAir.

Two Egyptian students at a St-Jean-sur-Richelieu flying school in 1981

My student had talent and learned quickly. But there was a student in the group that many instructors tried to train without success. Each of us thought that our own method might not have been appropriate so we encouraged him to try flying with other instructors. But it became clear that aviation would never be the field of activity in which he could progress and make a career. No instructor ever agreed to let him fly solo, and this, even after the student had spent months trying to understand the basics of flying: when came the time to execute the learned concepts, even after multiple demonstrations, he could not do it. He was simply not a safe pilot. I guess he changed his plan after the St-Jean experience.

(next story: the flight service specialist)

Screen captures

Photo of a Panamericana DC-3 in flight over Peru (FSX)

Post author By Stanley
Post date 3 November 2014

Hi,

Here is a little addition to the site for today, following a virtual flight made over Peru with the flight simulation software Microsoft Flight Simulator (FSX). Some modifications have been made to the screen capture in order to obtain the present result. The picture nonetheless reflects very well the atmosphere during that flight. For those who would like to know what software was used to produce the clouds, it was only FSX with ORBX 5 selection in the weather section. This selection always manages to offer an interesting sky.

Photo of a DC-3 from the Panamericana company, in flight over Peru (FSX)

François

Tags DC-3, FSX, Panamericana, virtual flight

Screen captures

A glider flight over Monterey, California

Post author By Stanley
Post date 31 October 2014

Hi,

Today, in the “Flight simulation / Standard virtual flights”, I have added a glider flight that was done over Monterey, California. It is a good exercise for flight simulation enthousiasts. Below is one of the picture taken during the flight.

François

Tags flight, FSX, standard virtual flights, virtual flight

Real life stories as pilot and FSS: learning how to fly

The flight from St-Jean-sur-Richelieu, Québec, to Edmonton, Alberta in 1981

Post author By Stanley
Post date 28 October 2014

(Precedent story: unexpected thunderstorm cells)

After a proficiency check, I soon find myself flying a Cessna 170B (tail wheel) on a flight across Canada, from St -Jean-sur- Richelieu, Quebec, to Edmonton, Alberta. I am accompanied by the aircraft’s owner who has not yet completed his private pilot course. The 1952 Cessna flies well, but has absolutely no instruments for air navigation, not even a VOR nor ADF. And the era of the portable GPS is not yet upon us.

Fourteen 1:500,000 VFR charts, covering the planned flight, are folded, glued and numbered. I trace the expected flight path on each chart, with 10 miles landmarks. This will facilitate the monitoring of our progress, considering the absence of navigation equipment. The preparation now completed, the take off is done on a beautiful summer day of 1981.

1:500,000 VFR charts used for a flight toward Edmonton, Canada, in 1981

We do stopovers at Gatineau, North Bay, Sudbury and then fly along Lake Superior to Wawa.

Small break in Sudbury on a VFR flight to Edmonton in 1981

We fly around Lake Superior to our next stopovers, Thunder Bay and Fort Frances. Over large forested areas, with no major landmarks, the gyroscopic precession must be corrected frequently so as not to stray too far from the intended track. Sometimes when it facilitates navigation, we either follow a railway or main roads. There are some instances where the westerly winds are so strong that our ground speed is slower than a car on a highway.

From Fort Frances to Kenora in 1981, with a Cessna C170B

Our flight path follows a line that keeps us away from areas of high air traffic. I choose to fly north of Winnipeg terminal control area, thus avoiding frequent radio exchanges with air traffic control in a language I do not master. The underperforming radio would not be of any help at any rate. This option eventually means that we must fly over Lake Winnipeg, in its southern portion. We have enough altitude to be able to glide to the other side in case of an engine failure. Nonetheless, we realize that we are gradually loosing several thousand feet due to the cold air mass above the lake. This with maximum power applied. The unexpected descent eventually ends, but it is now impossible to have an engine failure without ditching in the lake…

The crossing of Lake Winnipeg with a Cessna C170B in 1981

Near Lundar, Manitoba, the aircraft’s old gauges indicate a significant loss of fuel. It is surprising since we refueled an hour ago. We must land the plane on the nearest runway, but the strong crosswinds exceed the capabilities of the aircraft. Nonetheless, an attempt is made with the result that only the left wheel accepts the contact with the runway. As soon as the right wheel also touches the ground, the aircraft becomes airborne again. A nearby field is selected to make a precautionary landing so that the fuel status can be verified. We fly at low altitude over the electrical wires and the cows in the adjacent field, and touch smoothly at a ground speed not exceeding 15 knots. A farmer witnesses the landing and arrives in his red pick-up to offer some help. The tanks are almost full, so the plane only needs few liters of gasoline. Once this is done, we take off westward. It appears that the old fuel gauges of this 1952 Cessna are now totally unreliable…

Landing in a field with a Cessna C170B in Lundar, Manitoba in 1981.

We leave Manitoba through Dauphin and enter Saskatchewan. If we were to experience an engine failure above such uniform fields, the risk of serious problems at landing would be virtually nonexistent.

Near Yorkton, Saskatchewan, in flight with a Cessna C170B in 1981

The weather is slowly deteriorating. We choose to land in Watson, Saskatchewan, on the nearest runway.

The runway surface consists of muddy earth and grass, and it’s delimited by small red wooden panels. As we touch the ground, the tires splash mud everywhere, including under the wings.

The Watson runway, Saskatchewan, in 1981

The King George motel in Watson, Saskatchewan in 1981

Finally, the weather improves and a takeoff is made toward North Battleford, the last stop before Edmonton. The sloping terrain forces us to fly lower and lower near Edmonton, under an overcast stratocumulus, limiting our ability to see a long time in advance the correct airport from the three available (international, civil , military ). Luckily, everything goes well in choosing the right airport and approach, but we cannot say the same with radio communications. The sound quality coming from the old speaker is awful and the English spoken by the air traffic controller too fast for us. The combination of these two factors causes the controller to repeat more than once his instructions until he finally decides to slow down and we can officially say: « Roger! »

After spending few days in Edmonton it is now time for the return flight to St-Jean. This proves to be much easier and faster because the westerly winds push the aircraft. Our ground speed is sometimes double what we had managed to get on our trip to Edmonton. The journey took us twenty-five hours to go and eighteen hours to come back.

Cessna C170B in flight over Canada, summer 1981.

Climbing to 9,500 feet on the return leg to St-Jean-sur-Richelieu, in 1981.

VFR "on top" with a Cessna C170B in 1981 over Canada — VFR “on top” with a Cessna C170B in 1981 over Canada

Over North Bay, Ontario, the weather is ideal. But we will have to land in Ottawa while waiting for thunderstorms to move away from Montreal and St-Jean-sur-Richelieu. After a total of forty- three-hours of flying time, the old Cessna 170B is landing back to St- Jean -sur- Richelieu.

(Next story: the flight instructor license)