Motorcycle policemen lead the convoy bringing the Pope to Old Quebec in 2022.
If you don’t have privileged access, the main difficulty in photographing the arrival of Pope Francis in Old Quebec in 2022 lies in the vague and sometimes contradictory information offered to journalists in an obvious effort to protect the itinerary of the head of state.
You also have to deal with the strong police presence and the barriers that open and close according to the mood of the moment, blocking bicycles and pedestrians long before the Pope has crossed the Saint-Louis gate. As a photographer, you don’t want to find yourself suddenly stuck in a place of no interest.
Other aspects to consider are purely photographic, such as the ambient light and the distance from the subject at the time of the photo, which will influence the choice of equipment carried.
The official convoy arrives on Saint-Louis Street. It is important to know that in the afternoon, the sun crosses directly the axis of the Saint-Louis Street in its slow descent towards the west. If you position yourself along this street to take the picture, there is no physical obstacle, but you photograph against the light a convoy which passes at full speed. The camera sensor does not appreciate backlighting, because it has difficulty evaluating which light takes precedence. The choice of a straight line on Saint-Louis Street is therefore not very interesting.
The crowd greets Pope Francis on his arrival in Old Quebec in 2022.
The Pope’s driver sits on the left (at least in Canada). The Pope will therefore be on the right, whether forward or backward. If one stands in the Place d’Armes, one gives priority to the driver rather than to the Pontiff.
As the sun travels progressively from the axis of St. Louis Street to the west, the tall trees of the Place d’Armes will create a natural veil blocking the effects of backlighting. This will increase the chances of successful photos.
On St. Louis Street, the convoy is moving quickly in a long straight line. The chances of getting a good picture decrease. When the security cars reach the end of Saint-Louis, they have to brake because of a sharp curve near the Château Frontenac. If you position yourself immediately after the curve, the chances of getting an acceptable picture increase greatly.
As for photographic equipment, a camera lens that requires little light will help optimize shutter speed and depth of field, especially in the late afternoon. The Canon EF 85mm f/1.2L II USM lens offers more flexibility.
A camera with a full-frame sensor will also allow the cropping necessary to magnify the photo without loss of quality. For the photos included in this article, the camera used was a Canon 5DSR.
The riskiest technique which therefore requires a little more experience is to take the picture of the head of state in his car in focus while leaving the outside blurred, to show that the car is moving fast. You follow the car with the camera’s viewer. The closer it gets to you, there is an obvious feeling of acceleration. It is thus necessary to increase the rotation of your body to adjust to the car’s relative speed change. The autofocus does its job as the vehicle approaches.
There is only a fraction of a second where you get a completely clear view of the head of state. A second too early and you only see a portion of the face with a piece of the car, a second too late and you get a three-quarter rear view. A continuous shooting mode becomes absolutely necessary.
Pope Francis arrives in Old Quebec on his trip to Canada in 2022.
An adequate shutter speed captures the face of the head of state accurately and keeps the background blurred. A shutter speed that is too fast makes the whole scene clear and sharp, and the photo loses its dynamism. Too slow a speed and the face lacks definition. There is only one chance to get it right.
So, those were a few ideas to remember if you want to photograph important events in Old Quebec. A prior knowledge of the terrain and of the sun’s position at specific times remains essential if you want to increase your chances of success.
An American Robin and its fledgling in Sillery, Quebec City.
In Quebec City, an American Robin came to make its nest near our back door. Since it had been there brooding without giving birth to anything, we were beginning to believe that the mother was sterile.
Major construction work was to begin shortly at our home and would last a few weeks. We were almost glad that no chicks were born, as this would simplify the transportation of materials.
A day before the renovations were to begin, the first chick was born. From then on, all construction workers would have to be blocked off and asked to make a detour each time they needed to take scraps out of the house or bring in new material.
All labor groups agreed to our request without a second thought. For two weeks, electricians, plumbers, floor layers, delivery people and installers of all kinds came and went, sometimes asking for updates on the condition of the mother and her chicks.
In Quebec City, three two week old American Robins.
The photo above shows the three chicks one day before they fledge. The lack of light due to the location of the nest, as well as the desire not to disturb the fledglings, necessitated the use of a powerful telephoto lens and a camera capable of cropping without loss of quality. A full-frame cameraCanon 5DSR with a Canon 70-200 f2.8L IS II USM telephoto made the job easy. The ISO was set to 200 and I severely limited the depth of field to get the best possible shutter speed to avoid motion blur.
This morning, all the birds had left the nest. The parents were flying around nervously, attacking predators while the young were quickly learning to become independent. The blue jay that regularly visits us for its “dish of the day” was denied access to the backyard by both parents.
There are now three new American Robin in the area and it is almost certain that the mother will return next year to the same location, given the success this year.
A view of Château Lac Louise and the surrounding mountains.
The picture above shows Château Lake Louise and, in the background, Mount Richardson. Lake Louise is in Alberta but only a few kilometers from British Columbia.
This picture was taken during summer 2018 while several forest fires were raging in western Canada. Luckily for us, the smoke had not yet reached Lake Louise when the picture was taken. A few days later, the visibilty worsened and the air quality in the area degraded considerably.
At the time of the picture, the sky was cloudy and I had to wait for the sky to clear in order for more intense sunrays to light part of Château Lake Louise. This provided a greater contrast between the hotel and the mountains in the background.
I thought it was appropriate to keep the canoe with its passengers to add dynamism to the scenery. The photographic composition was planned so as to include the reflection of the bright part of the hotel on the lake.
In order to make an acceptable picture at this time of the day while sitting in a canoe, I used a Canon EF85mm f/1.2L II USM lens mounted on a Canon 5DSR camera. The outstanding performance of the lens in low light allowed me to keep the ISO at 200, thus limiting the photographic grain.
The shutter speed was adjusted to 1/5000 to compensate for the movement of my canoe and the effect of the wind. It seemed to me that for this particular landscape picture, a 16 x 9 format was better suited than the traditional 3X2 associated with full frame sensors.
Click on the following links for other pictures of Quebec and Canada on my blog.
Whimbrels over the Magdalen Islands in 2017. Photo taken with a Canon 5DSR.
The whimbrel is a bird that spends most of its life along the coasts of South America. It travels from Brazil to northern Canada when comes the time of nesting. It is possible to see it flying by the Atlantic provinces of Canada or by the Magdalen Islands in the province of Quebec.
The total number of whimbrels belonging to the hudsonicus species is estimated at around 58,000 and is in constant decline. During the last 40 years, the population has diminished by 80%. During their trip, the whimbrels stop an average of three weeks on the acadian peninsula to feed themselves. A study shows that 1200 were observed in 2014, 518 in 2015 and 344 in 2016. ( French text: Le courlis corlieu )
During our family holiday on the Magdalen Islands in 2017, we saw close to thirty of those birds while we were standing on a hill in Havre-aux-Maisons.
A flight of Whimbrels over the Magdalen Islands in 2017
The pictures were taken with a Canon EF 70-200 mm f/2.8L IS II USM telephoto lens mounted on a Canon 5DSR full frame camera. The focal length was set at 200 mm and I had to adjust the ISO at 1250 in order to get a shutter speed that would prevent a blurred picture as the birds were quickly flying by. Some additional cropping was needed in order to obtain a picture that was big enough.
For other photos on the province of Quebec and also Quebec City, click on the following links from my blog:
The Harlequin in front of the Jean Gaulin refinery in Lévis, 2017.
The picture above shows the Harlequin, a bulk carrier built in 2012 that has a 9.7 meter draught. It sails under the Cyprus convenience flag. On June 18th 2017, when the photo was taken, it was in front of the Jean Gaulin refinery in Lévis, Quebec, and was about to cross the Atlantic heading to Rouen, France. The Jean Gaulin refinery is Quebec’s largest refinery and ranks second in Canada when it comes to refining crude oil.
The photo was taken at 21:07, just before nightime. Since I was positioned on the highest floor of the Quai des Cageux wooden tower, there were constant vibrations associated with people going up and down the stairs. The tower’s movement combined with a moving vessel made the use of of tripod totally useless. It was thus necessary to make a handheld photo, which seriously increased the risk of a blurred picture considering the lack of light.
A Canon EF 85mm f/1.2 II USM fixed lens installed on a Canon 5DSR full frame camera helped to make a successful shot. The fact that this kind of lens requires very little light increases the photographer’s margin of manoeuver. It would obviously have been possible to increase the ISO to 6000 and more to compensate for the poor lighting, but that would have degraded the photo’s quality. The ISO was thus limited to 2000, with a shutter speed of 1/200 sec and a 1.6 aperture.
In order to limit the risk of a blurred picture, it was necessary to follow the movement of the ship with the camera. The closer one gets to immobilizing the ship in the viewfinder, the better the chances of a defined photo.
Since the ship was farther than it appears on the picture above, some cropping was mandatory to bring the vessel to a decent size. If the ISO had been too elevated to start with, the ensuing photographic grain would have been too big after the cropping and the quality of the picture would have suffered. With an ISO limited to 2000, the image kept a decent definition.
For other pictures of ships on my website, click on the following link : Ship photography.
Sunset colors reflecting on an Air Canada Bombardier Q-400 in Toronto
The Air Canada Terminal installations at the Toronto Lester B. Pearson international airport are such that a voyager intending to do a flight from Toronto to Quebec has to walk outside the building to catch his plane. This has some advantages, especially when it is an evening flight and there is, at the time of boarding, a superb sunset.
But to directly photograph the sunset colors without any filter or tripod, while hand holding the camera, is a recipe for disaster. And a photographer cannot stay immobile for very long in that restricted area where security agents and passengers walking towards the DHC-8-400 demand that everyone move with the flow.
A practical method that offers very good results is to indirectly photograph the beautiful sunset colors by using the aircraft as a reflector.
First, it is better to use a camera lens that requires very little light. This will limit the grain size while allowing a shutter speed that is high enough to avoid a blurred picture. The scenery was thus captured with a Canon 5DSR full-frame camera equipped with a Canon EF 50mm f/1.4 USM lens.
Secondly, the photographer must crop the photography using an image editing software so that all useless details are absent from the final shot. There are two objectives: 1) it is obviously necessary to keep the aircraft parts that will best show the sunset colors and 2) do the best possible use of the elements presenting graphic interests for the viewer.
If I had kept only several oversized windows in order to show the superb sunset colours, there would have been only clear bright colours, without contrasts. That would have given an uninteresting photo. The advantages of protecting the shadowy top of the aircraft are that it adds a strong luminosity contrast, allows the inclusion of the Q-400 diagonal lines (1-2-3-4-5) and a reflection of the reflections themselves (6) under the aircraft’s wing. All this is highlighted in the photo below.
Photography theory: diagonal lines on a Bombardier Q-400 photo
Westcoast Air Twin Otter floatplane C-FGQH arriving in Vancouver Harbour, in British-Columbia, during Summer 2016. The photo was taken with a Canon 5DSR camera.
The picture above was taken in British Columbia, during summer 2016, with a Canon 5DSR full-frame camera equipped with a Canon 70-200 f2.8L IS II USM telephoto lens.
A Westcoast Air (C-FGQH) Twin Otter floatplane (DHC-6) was about to land in the Vancouver Harbour. It is obvious that adjusting the shutter speed to 1/1200 would have given enough speed to obtain a clear image. But this would have taken away any movement sensation by freezing the propellers and background.
The shutter speed had to be slow enough to allow the rotation of propellers. It is clear that an aircraft’s propeller rotates more slowly on final for landing than during take-off. So the camera had to be adjusted for a shutter speed varying between 1/40 and 1/125.
A slower shutter speed increases the risk of getting a blurred photo, especially when the photograph must move with the camera to obtain the desired effect of movement. The fact that a telephoto lens is used also increases the possibility of a blurred picture. It is thus imperative to activate the stabilizer and horizontal panning function of the telephoto lens.
To obtain a background without any precise details, the camera is panning and follows exactly the aircraft’s movement. This requires a progressive acceleration of the panning, according to the aircraft’s position from the photographer.
When the Twin Otter gets closer, things get a bit more complicated as everything speeds up. It is necessary to already have positioned the feet in the appropriate direction in order to avoid a major switch in the body’s posture. The slightest useless or brisk movement would immediately be visible on the photo.
With a bit of practice, a photographer will achieve success by respecting the following elements: a shutter speed between 1/40 and 1/125, an appropriate position of the feet, no brisk movement while pivoting and a progressive acceleration of the body’s rotation aligned with the aircraft’s speed. A slower shutter speed will enhance the aircraft movement. But expect more blurred pictures when working with speeds between 1/40 and 1/60.
A last detail: as soon as the aircraft’s floats touch the water, the deceleration starts. The photographer’s pivoting speed must immediately slow down otherwise the photo will be blurred.
The container ship Maersk Pembroke under the Quebec Bridge, May 2016
Choosing what is important in a camera
Since there is actually no camera that has everything, whatever the brand, the buyer of a new camera must make choices: the type of sensor, the number of megapixels, the weight and size of the camera, the automatic focus’s speed and ability to follow a subject, the number of images per second, the performance under low light, the possibility to greatly enlarge a picture while maintaining its quality, advanced video functions, electronic communications with other devices, an extensive choice of lenses, etc. The list can be quite long…
The Canon 5DS(R): a specialized camera
A photographer happy with the Canon 5DS or 5DSR is one who needs a specialized camera offering both sharp images and the possibility of greatly enlarging the pictures it takes while maintaining the initial quality. This camera allows for more creativity as the possibility of extreme cropping beats, for now, everything that is on the market in the DSLR format.
Testing the potential of the Canon 5DSR when it comes to enlarging a picture
Here is an example of what this means: the photo below shows the yellow M of the McDonald’s restaurant photographed with a 50mm lens. Not easily visible…
Mc Donald’s restaurant’s yellow M captured with a 50 mm lens. Hard to see, of course!
Then the next photo was taken with a Canon EF 70-200mm f/2.8L IS II USM telephoto lens set at a 200mm focal length.
Testing the Canon 5DSR: the Mc Donald’s restaurant’s yellow M enlarged through a Canon EF 70-200mm f/2.8L IS II USM telephoto lens. Focal length used: 200mm.
But the picture can be enlarged a lot more using the amazing resolution of the Canon 5DSR. The following picture shows the result after cropping the 200mm image: the yellow M now takes the whole vertical space available in the picture without any loss in quality.
The Mc Donald’s restaurant’s yellow M, after having been enlarged (focal 200mm) and cropped within the Canon 5DSR.
From my position on the hill, the yellow M was barely visible with the naked eye. By using a 200mm focal length, followed by serious cropping, I was able to obtain the result above. So it is possible to photograph a subject that is almost invisible without a telephoto lens and transform it into the principal subject of the picture without any loss in quality.
I chose the 5DSR because the anti-aliasing filter has been neutralized in the model R to offer even sharper images, although there is a risk of occasional moire effect when there are repetitive patterns in a scene. This is the compromise that Nikon users must also have to deal with.
Rethinking photography
The 50.6 megapixel full frame sensor in the Canon 5DS or 5DSR allows a new approach of photography for those who do not have access to a much more expensive and larger medium format camera that does not necessarily give really superior pictures.
When I go outside for a photo session, it seems to me that I now carry a huge telephoto lens without the weight and the cost. A lot of what seemed to be unavailable possibilities are now accessible.
Taking pictures of people in the street is now less complicated: there are no more suspicious looks, artificial poses or people hiding their face. This is an ideal camera to capture people acting naturally without disrupting their routine. Gone is the feeling that you are bothering them in any way.
Quartier Petit-Champlain Old Quebec May 2016
The photo below was taken while I was standing at least 300 meters from the scene, just after sunset. For those who are from Quebec City, I positioned the tripod on a high wall on the other side of Chemin St-Louis, near the St. Louis Gate. I had to slightly brighten up the picture to make the details more visible, risking at the same time to increase the digital noise. It was a May 2016 warm misty evening, which is clearly visible by the lack of details in the background as we look in the distance.
Quebecers defying gravity in Old Quebec, May 2016
But those are not the only possibilities of this camera. The Canon Company, in its promotional video, explains what exactly the camera was designed for:
How can someone maximize the use of a 50.6 megapixel full frame sensor
In order to bring a subject closer to you while fully benefiting from the Canon 5DSR 50.6 megapixel full frame sensor, it is obvious that there must be absolutely no vibrations. The photographer must therefore use a tripod, a remote control release and the mirror lock-up function. This allows for a very low ISO setting while avoiding a blurred picture.
The mirror lock-up function is very well thought through, with the possibility to choose a totally automatic processus according to a timing chosen by the photographer (between 0 and 2 seconds). The system eliminates any secondary micro vibrations.
In order to ensure an even better picture, the photographer must use Liveview and set it to the 16X enlargement available on that camera (versus 10X on my Canon 5D MKII) to manually adjust the focus. It is then possible to see the slightest vibrations caused by the wind. Doing so, I realized that my camera strap, lightly swaying in the wind, was causing some minimal vibrations. Every detail taken into consideration will improve the final result.
One must then ensure to immobilize the strap and even diminish the tripod height if possible when the wind is blowing. These steps will allow an incredible enlargement of a subject while maintaining the initial quality of the image offered by a full frame sensor.
Superior mirage effect (cold mirage)
The photo below shows a ship being helped by two Ocean tugboats on its way towards the Quebec Harbour. The ship was at a good distance from the harbour; it is then possible to witness the superior mirage effect (cold mirage) resulting from a temperature inversion immediately over the water. The boats are deformed but the important close-up has not lowered the image quality. It has instead allowed to increase the atmospheric phenomenon effect.
Superior mirage (cold mirage) effect. Vessel and two Ocean tugboats on the St-Lawrence seaway heading to the Quebec Harbour, May 2016.
Once closer to the Quebec Harbour, the cold mirage effect decreased, as shown on the picture below:
Quebec Harbour, May 2016
The Canon 5DS or 5DSR without the use of a tripod or mirror-lock
Obviously, a tripod is not necessary if you do not intend to use a lot of cropping to enlarge a photo. You will obtain excellent results with the hand-held camera providing that you remember that this Canon DSLR is a specialized tool.
So many megapixels on a sensor of that size require that the photographer adapts his technique. But, as you can see from the picture below, it is totally possible to capture an aircraft in movement, even at dusk (May 11, 19:49), when the camera’s parameters are correctly adjusted. A higher shutter speed than normal is, in this case, absolutely mandatory.
The photo below shows an Air Canada Express Bombardier DHC-8-402NG (C-GSJZ) on final for runway 29 at the Quebec Jean-Lesage international airport (CYQB).
Bombardier DHC-8-Q-402NG (C-GSJZ — Air Canada Express) on final for the Quebec Jean-Lesage international airport, May 2016. Photo taken with a DSLR Canon 5DSR.
The Maersk Pembroke with the camera hand-held
The photo below shows the Maersk Pembroke container ship photographed with a hand-held camera using a Canon EF 70-200mm f/2.8L IS II USM telephoto lens during Spring 2016 near Quebec City. The focal length was only 140mm and the shutter speed 1/1000. The lens was equipped with a polarizing filter and the photo taken when the vessel was approaching the Quai des Cageux.
The Maersk Pembroke container ship on the St-Lawrence seaway near Quebec City, May 2016
The colours produced by the Canon 5DSR
The digital processing of the image and colours produced by the Canon 5DSR require different adjustments than what was necessary with the Canon 5D MKII. I am still learning how to handle the results produced by this camera so I will wait a bit before commenting.
View of Old Quebec from the St. Louis gate. Quebec City, May 2016
Night photography
Here are two photos taken during the evening in Quebec City. The photo below required a 200mm focal, an ISO set at 4000 and a shutter speed at 1/30 in order to obtain something else than trailing lights. Luckily, the traffic was moving slowly…
Night photography, Grande-Allée avenue, Quebec City, May 2016
The picture below, taken with a 200 mm focal, required an exposure time a bit longer that one second with the ISO set at 800. To take the photo, I took advantage of the fact that the cars were momentarily stopped at a red light, so that they would be clearly visible.
Night photography, Tourny fountain and Quebec lower town, May 2016
The images per second of the Canon 5DS(R)
The Canon 5DSR is so far quite an impressive camera. I would have appreciated that Canon offer a higher rate of images per second (7 instead of 5) to make it more versatile.
The camera allows taking pictures with smaller formats than 50.6 MP, the two other options being 28 MP and 12 MP. If the camera can deliver five images per second with 50.6 MP RAW files, we can deduct that it is able to offer more speed for smaller formats. But the camera is blocked at 5 IMS so that it, I suppose, does not compete with other existing Canon models of the same category…
Nonetheless, Canon says that the rapid sequence of shooting lasts longer if the photographer uses the smaller files provided. So it is not faster, but it keeps on firing for a longer period. My guess is that it would only require a new firmware version to improve this camera’s number of images per second.
For other night pictures, click on the following link to my site:
A Bombardier CL-415 water bomber, property of the Government of Quebec, is being prepared for its flight towards Fort McMurray, May 2016
Quebec’s CL-415s helping out in Fort McMurray
On May 5th, 2016, according to what had been announced by the Government of Quebec, four CL-415s took off from the Quebec Jean-Lesage international airport (CYQB) heading to Fort McMurray, Alberta, to help in the fight against widespread forest fires in that province. It is the worst natural disaster that Canada has known in its history.
Preparing flight crews and aircrafts for such a long cross-country trip naturally demands much coordination from the SOPFEU (Society for the protection of forests against fires). Once they will have landed at the Fort McMurray airport, the pilots of those CL-415s will be under the direct command of the Albertan authorities in charge of fighting the wildfires, since the latter are best positioned to know exactly what the local needs are.
I figure that the flight service specialists (FSS) of the Nav Canada flight information center (FIC) in Edmonton must have quite busy days with the increased aerial activity associated with the numerous fires…
Crew members are walking towards the Government of Quebec CL-415; they will soon be airborne and heading to Fort McMurray in Alberta, to fight the forest fires (2016)
The picture above shows crew members heading towards their assigned aircraft. Once they start working in the Fort McMurray region, they will not only have to directly fight the forest fires but also head to sectors that have not yet been touched by fire and water the area thoroughly to prevent new wildfires.
A Government of Quebec CL-415 number 245 is taxiing at the Quebec Jean-Lesage international airport to take-off towards Fort McMurray, in Alberta, to help fight the out of control forest fires in that province during May 2016.
Taking pictures of propeller-driven aircrafts
A Bombardier CL-415 water bomber takes off from the Quebec Jean-Lesage international airport heading to Fort McMurray, in Alberta, to help fight the forest fires (2016)
It is a bit touchy to photograph propeller-driven aircrafts while making sure that there is a sensation of movement. In a natural reflex to want to avoid blurred pictures, the photographer uses a shutter speed that corresponds to the focal used for the shot. In the case of the picture above, the focal was 400mm. But if a shutter speed of 1/400 had been used, the propellers would have been totally immobilized and the aircraft would have looked like its climbing while not using its engines.
It was necessary to reduce the speed to 1/160, thus increasing the risk of obtaining a blurred picture. In order to get both image sharpness and moving propellers visual effect, the photographer has to follow exactly the movement of the aircraft with the camera so that it looks totally immobile in the viewfinder. This asks for a bit of practice but allows for more realistic photos.
The CL-415 in a black and white photo
Black and white photo of a Bombardier CL-415 (C-GQBG) flying over Quebec City in 2015
The government of Canada helping out Alberta’s citizens
The government of Canada, under Justin Trudeau, has promised to match the amounts of money offered by all Canadians to the Red Cross society toward helping the Fort McMurray population.
Obviously, its contribution will not stop there (in fact, far from it), but the message is for the whole Canadian population to contribute generously to support the efforts of the Red Cross. It is already estimated that the material damages will reach at least nine billion dollars and that numerous years will be required to rebuild everything. The Liberal Party of Canada had built its political campaign around the need to invest for the renewal of infrastructures. With the Fort McMurray fires, there will be plenty of new unplanned expenses ahead.
More than 1,400 firemen are fighting the wildfires. So few, there has been very few lives lost, although “very few” is always too much. The crisis is, according to everyone, well managed by the government of Alberta.
At the time of writing, there was still no rain forecasted for days to come and the drought was also extending to the southern half of Saskatchewan and part of Manitoba. The winds were expected to increase, which would mean that even more resources would be needed in the near future to bring those wildfires under control.
It seems to me that the government of many Canadian provinces would benefit in acquiring new water bombers like the CL-415 to give them an increased margin of manoeuver that would allow them to react more quickly, if we take into account the tendency for the ever growing number and size of forest fires. In the picture below, the government of Quebec CL-415 number 247 is just airborne from Quebec to Fort McMurray.
A Bombardier CL-415 C-GQBK airborne from the Quebec Jean-Lesage international airport heading to Fort McMurray, Alberta, in May 2016
The CL-215s will not head to Fort McMurray
While several CL-415s are leaving for Alberta, few water bombers, like the two Canadair CL-215s shown below, stay at the Quebec Jean-Lesage international airport in case of forest fires in the province and also to be used for the seasonal rehearsal needed for every pilot before they are dispatched across the province of Quebec.
Two Canadair CL-215 water bombers parked at the Quebec Jean-Lesage international airport in May 2016.
Global warming
Some people can say that global warming is not responsible for the increasing number of extended wildfires. They might be right, but I prefer to adopt a wider view than only what is going on in Alberta. Heat transfer between the north and south are now more extreme in order to equalize the temperatures around the globe. All means to reduce the difference in temperatures between the equator and the poles are at work and this causes increasing problems to particular regions.
The Kamloops region in British-Columbia, when numerous forest fires were raging 2014.
A powerful El Nino phenomenon, repetitive Omega blocks, the air circulation in different cells (Hadley, Ferrell, polar, Walker) all participate in the heat exchange. At a more reduced scale, we also regularly hear of cold and warm fronts in the meteorological forecasts.
It is certainly not local warm fronts that are responsible for the fact that a thinner layer of permafrost is unable to ensure the stability of Arctic runways anymore. Nor are fronts responsible for the fact that houses on stilts do not have a stable foundation anymore. Many heat records have been established these past years in northern Canada. There will certainly be large amounts of money to spend to rebuild the Nordic infrastructures.
Brush fires as soon as April in Alberta
This year, as soon as April, there were widespread brush fires in a region as north as Fort McMurray in Alberta because winter has not brought much snow to humidify the land during Spring. I thus wondered what would happen once in July. Albertans did not need to wait that long to get the answer.
Western Canada forest after a fire (2014)
The modelization of climatic changes indicates that, in the Fort McMurray region, the forest fire season is already fifteen days longer that it used to be. More heat might favor more droughts. But an increase in temperature also favors the development of thunderstorms and with them comes lighting that will start up new fires.
One thing is sure: insurance companies will not lose time with the different theories on global warming. The reinsurers (those who insure the insurance companies) have the obligation to limit their losses to stay afloat and premiums will quickly increase to answer to the thousands of claims following an increasing number of natural disasters.
Photos of the local air traffic in Quebec, just after the CL-415s departed to Fort McMurray
FedEx ATR 72-202F C-FTAR and Air Canada Express Bombardier DHC-8-Q-402NG (C-GIJZ) at the Quebec Jean-Lesage international airport in May 2016
At the Quebec airport, between the take offs of the four Bombardier CL-415 towards Fort McMurray, I was able to take few pictures of the local air traffic. In the photo above, it is possible to see a FedEx ATR 72 (C-FTAR) taxiing toward the ramp after a landing runway 06. An Air Canada Express Bombardier DHC-8-402 (Q-400) (C-GIJZ) was also being towed for is imminent departure.
ATAC’s Hawker Hunter N339AX
Being in luck, I was able to capture a Hawker Hunter (N339AX) belonging to the American company ATAC, just airborne from Quebec. As for any military jet, it is difficult to ignore them on take-off: the reactor’s noise is there to remind you of their presence…
A Hawker Hunter belonging to the american company ATAC is airborne from the Quebec Jean-Lesage international airport (CYQB), May 2016
A Hawker Hunter, from the american company ATAC, is airborne from the Quebec Jean-Lesage international airport (CYQB) in May 2016
The pictures above have been taken with a Canon 5D MKII camera, equipped with a telephoto lens Canon 70-200 f2.8L IS II USM with a polarizing filter and a Canon Extender EF 2X III which brought the focal length to 400 mm. Even then, more cropping was necessary to enlarge the aircraft since I was quite far away from the runway.
Wishing to ensure that the image was sharp (a blurred picture is more probable with a 400 mm focal length while the photographer attempts to follow a fast flying jet), I adjusted the shutter speed to 1/1600 and made sure that the automatic focus was set on AI servo.
I now realized that a slower speed could have worked a bit better since it would have allowed showing a blurred forest in the background while keeping the aircraft sharp. But it is not often that you have the opportunity to see a Hawker Hunter in flight these days and I played safe with the shutter speed. The ideal shot will be for another day…
CL-415s and CL-215s together in Quebec (2012 photo)
CL-415 and CL-215 water bombers belonging to the Gouvernment of Quebec. Quebec Jean-Lesage international airport (CYQB) 2012
A last picture, taken few years ago, during autumn 2012, shows numerous water bombers CL-415 and CL-215 parked at the Quebec Jean-Lesage international airport (CYQB). During the off- season, the water bombers are brought back to Quebec City from the different bases were they have been in operation during summertime.
For other articles on aviation and photography, click on the following link: Aviation photography
Here is some information aimed at helping tourists visiting Toronto, who like photography and aviation, and would think of booking one day during their visit to head to the Toronto Lester B. Pearson international airport (CYYZ) for a plane spotting photo session.
Initial planning
If you can, get a scanner or download an app on your cell phone to get real time information on air traffic around the airport: you will then know in advance the type and nationality of inbound or departing aircrafts.
Search for websites giving you access to Toronto airport VHF frequencies and program your scanner if you decided to get one.
Have a look at different plane spotting websites for the Toronto airport: there are many precious advices from experienced plane spotters that will prove useful in heading to the best spots and avoiding common mistakes.
Print two or three maps of secondary routes around the airport so that you can orient yourself when there is a change in runway use due to different winds or if you use a taxi ride to move around the airport: the driver will always ask you details on how to get there since those secondary routes are not a common destination for him (and chances are that he will not know where to go if you ask him to head to threshold of runway 05. Basically, he needs road names, not runway numbers).
Cessna 560XL S5-BAV Toronto 2016
British Airways Boeing 777-236 G-ZZZA in Toronto 2016
Before leaving your Toronto hotel
Before you leave the hotel, look at the Toronto weather forecast, among them the TAF, to know the wind pattern for the day. The Nav Canada site has everything you need to know and there is a possibility to choose between coded or plain aviation language.
Don’t forget to bring many snacks as well as a bottle of water since you will possibly be at a good distance from a restaurant for many hours, depending on which runway is in use. The same goes for additional batteries and memory cards for the camera.
Don’t forget the scanner, the cell phone (to call a taxi driver or get access to the arrivals and departures information) and all the photo equipment needed, as well as an abnormally high number of clothing layers necessary in case of winter photography: eight hours almost immobile outside in February calls for an appropriate preparation if you want to appreciate your experience. If you economize on clothing, it is certain that you will have to shorten your photography session.
I chose February for its very interesting light and not for its temperature! Most of the shots in this article were taken in only one day at the Toronto airport, between 10h30am and 18h30.
American Airlines MD-82 N482AA final 05 Toronto 2016
From the hotel to the airport
If you chose to stay at a downtown hotel in Toronto, the best way to get to the Toronto international airport is to use the UP Express train, from the Union Station on Front Street. Its use is very simple and departures are made every fifteen minutes. In February 2016, the cost was CDN $44.00 for a return trip to the airport, while a taxi ride cost $130.00.
UP Express Toronto 2016
The UP Express ride only takes 25 minutes and the train stops at Terminal 1.
It is preferable to avoid using your car around the Toronto international airport since some secondary roads are private and no stopping is allowed. You will take more time to look for police than to enjoy your plane spotting photography session.
Once you are at Terminal 1
Once you exit the UP Express at Terminal 1, get your scanner and monitor the ATIS frequency (120.825) to get the latest information on the runways in use for take offs and landings. For my photo session, the ATIS announced that runway 05 and 06L were in use, both for arrivals and departures. I took a taxi, showed the map with secondary roads to the driver and within few minutes I was where I needed to be and started the photo session.
Air Transat Airbus A-330 C-GTSN Toronto 2016
A preliminary internet search allowed to discover that heavies mostly arrive from Europe during the afternoon et that runway 05/23 is favored for Emirates Airline Airbus A-380 arrival. I thus decided to position myself near runway 05 instead of 06L.
There are two or three quite isolated spots around the airport that provide interesting point of views for aircraft photos but that can present security problems for a photographer working alone with expensive equipment. Experienced plane spotters suggest that you should be accompanied by friends if you decide to opt for those spots (see the “plane spotting” internet sites suggested at the beginning of this article).
Emirates A-380 final for Toronto (CYYZ)
Emirates A-380 on final for Toronto (CYYZ) 2016
Emirates A-380 on final 05 for Toronto (CYYZ) 2016
Technical advices
For precise photos of aircrafts in movement, I use the following parameters with my Canon 5D MKII camera:
1. Only the central AF Point of the auto focus system is selected and not the surrounding ones in order to avoid that the camera sets the focus on other objects than what I desire (trees, ILS structure, buildings).
2. The AI Servo setting is more efficient than the AI Focus or One Shot. The aircraft will be followed precisely.
3. If I want to include surrounding objects in the photo, I adjust the aperture to 7.1 or 8, instead of 11 or 13. I thus avoid increasing the ISO too much, which would affect the picture’s quality if it has to be enlarged with Photoshop.
Westjet Boeing 737-8CT C-GWSV Disneyland Livery in Toronto 2016
4. To take pictures of an approaching propeller powered aircraft, a speed adjusted to 1/125 is generally adequate. You must pivot according to the aircraft movement so that it looks like it is immobile in your viewfinder. The picture is easier to take when the aircraft is farther away but becomes more of a challenge when it gets closer and flies by you since you must constantly change your pivoting speed.
Porter Q-400 C-GLQD on final for Toronto Billy Bishop airport (CYTZ) 2016
Air Canada DHC-8-102 C-FGQK Toronto 2016
5. A shutter speed that is too high will immobilize the propeller of an aircraft and make it look like the engine is not working, which will take away realism.
6. Throughout the day, position yourself so as to have the sun behind you (if there is any sun!), unless you are looking for special effects.
Global 5000 GL5T C-GJET in Toronto 2016
7. A very high quality lens, like the Canon 50mm 1.4, allows for beautiful pictures during the evening since there is no compromise on ISO, as the lens does not need much light. The grain size stays relatively small.
Air Canada Boeing 777 final 05 Toronto 2016
8. I use a very low ISO if the photo includes an interesting but far away aircraft, in order to be able to crop the picture with Photoshop. Since I cannot compromise on the speed to avoid a blurred picture, it becomes obvious that it is the aperture that pays the price.
Air Canada Airbus A-330 final 06L Toronto 2016
9. If the situation allows it, add visual references other than clouds to get a bit more variety in your aircraft photo collection.
Air Canada Boeing 777 final runway 05 Toronto 2016
10. Try a black and white photo if the cloud formation is particularly interesting.
C-GQBG CL-415 and cirrus clouds on a black and white picture
11. RAW+JPEG files allow for important adjustments when necessary. A JPEG only photo gives you little leeway when you want to correct mistakes or during problematic lighting conditions.
12. Variable sky conditions and constant direction winds are preferable for your photo session since the runway in use will not be changed in the afternoon and your pictures will benefit from different light intensity and cloud formations.
13. If you want to take the aircraft in relation to the ILS poles and you are looking for a symmetrical photo, just move few inches to the right or left while the aircraft is approaching or going away from you. You will also want to avoid that the horizontal poles of the ILS cut the plane and make it difficult to see.
Westjet Boeing 737-800 final 05 Toronto 2016
14. Have fun experimenting, like taking a shot just above your head while including other objects for added interest.
On the ILS 05 for Toronto 2016
15. Instead of always showing the whole aircraft, try a close-up view.
Air Canada Boeing 787-9 C-FNOI in Toronto 2016
16. The close-up view might be such that even passengers of an aircraft on final will look at you while you immortalize them.
United Express on final at the Quebec Jean-Lesage international airport.
17. Chances are that you will meet other enthusiast plane spotters in the same area as yours since they also prepared themselves for a successful photo session.
Westjet Boeing 737-800 C-FYPB in Toronto 2016
18. Since you are in Toronto, head to Toronto Harbour when you are back downtown. You will witness the air traffic surrounding the Toronto Billy Bishop airport (CYTZ), formerly known as Toronto Island, and possibly take some original shots.
Porter Q-400 C-GLQM and C-GLQB at Toronto CYTZ 2016
19. This is the photo equipment used for my Toronto airport plane spotting session: Canon 5D MKII camera and the following Canon lenses: EF 50mm f/1.4 USM, EF 16-35mm f/2.8L II USM, EF 24-70mm f/2.8L USM, EF 70-200mm f/2.8L IS II USM. No polarizer was used that day since I wanted to increase my margin of manoeuver with fast moving aircrafts under the February low intensity light.
Air Canada Rouge Boeing 767-300ER final 05 at Toronto 2016
American Eagle CRJ-701ER N523AE Toronto 2016
Aviation photography requires much planning for successful photos. But all your efforts will rapidly bear fruits once you are on site and you will not see time pass! Have a great plane spotting session and give me some news of your experience if you can!
Air Canada Boeing 767-375 (ER) C-FCAB in Toronto 2016
You can have access to other aircraft photos taken at Toronto through this link on my site: photo galleries/aviation only
For other articles on aviation and photography, click on the following link: Aviation photography
