Tag: ORBX

Categories
Flight Simulation

Flight simulation: just in time for a BBQ in Bear Gulch

WACO in flight towards Bear Gulch (fsx)
WACO in flight towards Bear Gulch (fsx)

Hi,

I’ve just added a new VFR flight in the “flight simulation” section, under “standard virtual flights”. An Alabeo WACO takes off from Cushman Meadows, heads south-east towards the Skokomish Reservation, then flies over the Bremerton airport to the north-east and ends up landing  at the Bear Gulch aerodrome, just in time for a BBQ. This was done using FSX. The first part of the cross country is for a starting virtual pilot but the last part requires a bit more experience.

Waco on short final for Bear Gulch WA38 (fsx)
Waco on short final for Bear Gulch WA38 (fsx)
WACO landing in Bear Gulch WA38 (FSX)
WACO landing in Bear Gulch WA38 (FSX)

It is a more demanding experience than what is normally found in the “standard flights” section, since it involves a final landing at Bear Gulch. The runway at that airport is only 1411 ft long, and quite narrow. So you have to plan your approach carefully. A little wooden bridge is part of the runway! Since the flight is done in nice VFR conditions and does not involve engine failures or using a really fast aircraft arriving on a short runway, I decided that the “standard virtual flights” section was more appropriate. Still, it is not an easy approach.

A Texaco WACO aircraft is taxiing on a wooden bridge at Bear Gulch, WA38
A Texaco WACO aircraft is taxiing on a wooden bridge at Bear Gulch, WA38
A Waco aircraft belonging to Texaco is taxiing in Bear Gulch, WA38
A Waco aircraft belonging to Texaco is taxiing in Bear Gulch, WA38

Cushman Meadows (KCMW) and the Bear Gulch (WA38) runways do not exist in real life but am I ever glad Bill Womack took the time to create them. His site can be found under Iblueyonder. The screen captures show both airports and the PNW region sold by ORBX. If you want nice shadows on the ground while not using P3D, just get CumulusX and set the season to summer, with scattered clouds in mid afternoon.

A Waco aircraft with a tractor in the foreground is parked at Bear Gulch, WA38
A Waco aircraft with a tractor in the foreground is parked at Bear Gulch, WA38

Some guests have already arrived in Bear Gulch. You will see the smoke rising from the BBQ being prepared while you are on short final. The guests will certainly be taking pictures of your approach, as you are flying a vintage aircraft. So, if there was ever a time to do things correctly, now it is!

For more articles on flight simulation on my web site, click on the following link : Flight simulation

Have fun!

Categories
Flight Simulation

Flight simulation: gliding with the DG-808S over Canadian lakes and forests.

The link is finally cut between the plane and the DG-808S glider (fsx)
The link is finally cut between the plane and the DG-808S glider (fsx)

In the « flight simulation » section, under « challenging virtual flights », you will soon find screen captures representing the DG-808S glider built by DG Flugzeugbau. The flight departed from the Parry Sound airport (CNK4) in Ontario. The scenery has been created by Vlad Maly, from ORBX.

A DG-808S glider in flight with birds (fsx)
A DG-808S glider in flight with birds (fsx)

The command CTRL+SHFT+Y will allow an aircraft to appear and a cable to be installed between the aircraft and the glider. It is more demanding to do gliding operations in the Parry Sound region because if the pilot gets far enough from the airport, he leaves behing many options to help him land easily in case of difficulties. There are not many fields or roads. There are mostly lakes and forests. The view is interesting, but you fly with the feeling that there is really no plan B. If the glider must go down, chances are it will find itself either in water or on the top of trees.

Glider DG-808S turning base for the Parry Sound airport (fsx)
Glider DG-808S turning base for the Parry Sound airport (fsx)
Glider DG-808S over Robert's Lake (fsx)
Glider DG-808S over Robert’s Lake (fsx)

The DG-808S can reach a speed up to 146 kT and has a gliding ratio of 5o :1. It is a high performance glider. It can carry up to 343 pounds of water to be used as ballast. In real life, the pilot uses the necessary amount of water according to the prevailing weather conditions. If there are weak thermals, the glider will easily operate without water. If there are strong thermals, it carries the maximum amount of water in its wings to add sufficient weight.

DG-808S sailplane on short final for runway 35 in Parry Sound (fsx)
DG-808S sailplane on short final for runway 35 in Parry Sound (fsx)
Glider DG-808S over threshold 35 Parry Sound (fsx)
Glider DG-808S over threshold 35 Parry Sound (fsx)

The flight was made using CumulusX and FSX. On final for runway 35, you will have the opportunity to fly at low altitude over Robert’s Lake and admire all the small details created to make the scenery more realistic.

A DG-808S sailplane and the Canadian flag in Parry Sound, Ontario (fsx)
A DG-808S sailplane and the Canadian flag in Parry Sound, Ontario (fsx)
End of a DG-808S glider flight in Parry Sound, Ontario (fsx)
End of a DG-808S glider flight in Parry Sound, Ontario (fsx)

For more articles on flight simulation on my web site, click on the following link : Flight simulation

Good luck and have fun!

Categories
Flight Simulation

Flight simulation: Parry Sound (CNK4) to Toronto Billy Bishop (CYTZ)

Flying over Toronto downtown shortly before the landing in Toronto Island (CYTZ)
Flying over Toronto downtown shortly before the landing in Toronto Island (CYTZ)

I recently added, in the standard virtual flight section, a flight leaving Parry Sound for Toronto Billy Bishop.Here is an opportunity to learn a bit more about the Great Lakes region in Ontario. The Parry Sound airport, from ORBX, is a first creation by Vlad Maly for this province. The runway length is 4000 feet. Just beside the airport, there is a lake, Robert’s Lake (CRL8), with many cottages, floatplanes and sailboats that are visible when you select the appropriate season. The lake also offers 4000 feet for takeoffs and landings.

The actual flight has been made while the clouds were low enough that the flying altitude forbid the adequate reception of the Toronto Island (Billy Bishop) NDB (257khz) in the first half of the flight. A touch-and-go was made at Toronto International (CYYZ). MyTraffic2013 provided the airport with many AI aircrafts. Once over downtown Toronto, it was now time for Pilot’s FS Global 2010 to automatically install a maximum of buildings, for more realism.

On final for the Toronto Billy Bishop (Toronto Island) airport (CYTZ)
On final for the Toronto Billy Bishop (Toronto Island) airport (CYTZ)
Landing at CYTZ with the CN tower in the background (FSX)
Landing at CYTZ with the CN tower in the background (FSX)

Finally, theToronto Billy Bishop (formerly Toronto Island) was modified by ORBX in order to make it more interesting and alive. You will thus find, on arrival, some staff to take care of the refueling process. Somes vehicules have also been added. Naturally, MyTraffic2013 took charge of AI aircrafts as CYTZ is quite a busy airport and needs some air traffic to enhance the realism.

Time to refuel at Toronto Billy Bishop (CYTZ)
Time to refuel at Toronto Billy Bishop (CYTZ)

I wish you a good flight, if you wish to try it out. I would suggest though, for a more interesting experience, that you install ORBX FTX Global Vector on your computer, as the Microsoft Flight Simulator (FSX)software does not do a good job when it comes to representing the Great Lakes area. ORBX Open LC for North America further improves the flying experience.

For more articles on flight simulation on my web site, click on the following link : Flight simulation

Categories
Screen captures

A Pilatus PC-21 in Kenai, Alaska

A Pilatus PC-21 heads for a landing at Kenai airport, Alaska, after a training session (FSX et Cumulus X)
A Pilatus PC-21 heads for a landing at Kenai airport, Alaska, after a training session (FSX et Cumulus X)

In the present screen capture, the Pilatus PC-21 is a creation of IRIS, while the background scenes (SAK) and Kenai regions are ORBX products.The clouds are being managed by REX. This picture has been slightly modified to improve the lighting. IRIS PC-21 is an excellent aircraft and numerous point of views are provided for the screen captures fans. The operating platform comes from FSX, helped by Cumulus X.

Categories
Screen captures

A KLM MD-11 and the spectacular approach of St Maarten (TNCM)

Soon, a special flight will be added to the “flight simulation” section, under “challenging virtual flights”.  A KLM MD-11 is doing a passenger flight between  Palm Springs (KPSP)and the St Maarten (TNCM) airport, using FSX and Cumulus X, as well as Orbx Vector and Global. St Maarten is known for its spectacular approach over a beach loaded with tourists and many videos are available on You tube for those of you who would be interested.

The Palm Springs airport is an Orbx creation and the virtual St Maarten is designed by Fly Tampa. The virtual MD-11 comes from PMDG. I chose to do a virtual passenger flight with the KLM MD-11 to emphasize the termination, on October 26 2014, of this type of aircraft for carrying passengers.  KLM was the last company to use a MD-11 for that type of transport and the last flights were made from Toronto and Montreal to Amsterdam Schipol durant last October. Thanks to flight simulation, virtual pilots will always have the opportunity to fly this exceptional aircraft.

Categories
Screen captures

A WACO at work in Western Canada

A WACO YMF5 practicing aerobatic figures over Airdrie, Alberta.
A WACO YMF5 practicing aerobatic figures over Airdrie, Alberta.

The screen capture shows an Alabeo company Waco YMF5 in action. The background scene is a creation of ORBX. FSX has been used for this virtual flight over Alberta. The Waco is easy to fly and Alabao has programmed many point of views from which the virtual pilot can take pictures in flight. ( V on the keyboard). Airdrie Airpark, Claresholm Industrial Park and High River, all created by Vlad Maly, can be found near the training area. They are all quality products. The first airport must be bought but the two others are offered as freewares by Orbx. It is an interesting point of departure for a virtual pilot who would like to cross the Rockies towards Vancouver or Victoria.

Categories
Flight Simulation

Flight simulation: Fly a Dash 7 from Kokoda to Kagi in Papua New Guinea

De Havilland Canada DHC-7 Dash 7 over the Kokoda trail in Papua New Guinea
De Havilland Canada DHC-7 Dash 7 over the Kokoda trail in Papua New Guinea
Steep turn made by a Dash 7 (FSX) landing in Kagi, Papua New Guinea
Steep turn made by a Dash 7 (FSX) landing in Kagi, Papua New Guinea

If you are looking for a real challenge, try a flight from Kokoda airport to Kagi, using a DHC-7. Kagi is situated along the Kokoda Trail in Papua New Guinea. The runway has a 12.5 degree slope and is approximately 447m long (1466 ft). The airstrip’s altitude is about 3900 ft msl.  You will need the ORBX scenery (AYPY) Jacksons Airport made by Ken Hall and Tim Harris, as well as other Orbx products such as Global, Vector and Holgermesh to do the flight and obtain the same views as above. In order to find the airports, two maps are included in the “User documents” included with AYPY.

A Dash 7 (FSX) on final for Kagi, Papua New Guinea
A Dash 7 (FSX) on final for Kagi, Papua New Guinea

I adjusted the fuel at 50% in each tank. For payload, I used 5 passengers and luggages. Obviously, the aircraft could have been loaded with many more passengers and cargo. But since it was a first trial at Kagi with a Dash 7, I thought that a lighter payload would increase my chances of a successful landing by reducing the approach speed.

A United Nations Dash 7 after landing uphill on runway 07 in Kagi, Papua New Guinea
A United Nations Dash 7 after landing uphill on runway 07 in Kagi, Papua New Guinea

The landing in Kagi is made on runway 07 and the takeoff on runway 25. From Kokoda airport, follow the Kokoda trail then, when appropriate, make a right turn toward Kagi. There are few airports within a small area so it can get a bit confusing. The best way is to overfly the area slowly to ensure that what you see in flight and what is on the map are both the same airport.

The two most difficult aspects of the approach are the steep turns required while flying close to the mountains in slow flight configuration, that is to say with full flaps and wheels out. The second problem to keep in mind is the sloped runway: 12.5 degrees is not negligeable.  But once you are on the runway, the Dash 7 will almost stop by himself due to that slope. The takeoff on runway 25 is not a problem with that aircraft: with such a sloped runway, you will be airborne in no time.

A United Nations Dash 7 ready for takeoff on runway 25 in Kagi, Papua New Guinea
A United Nations Dash 7 ready for takeoff on runway 25 in Kagi, Papua New Guinea
De Havilland Dash 7 airborne from Kagi
De Havilland Dash 7 airborne from Kagi

I am convinced you will enjoy this demanding flight. There are lots of plants and trees included in the scenery, so it makes for a very realistic approach. Have fun and make sure your passengers will still have a smile on their face when they get out of the airplane!

P.S.: The flight was made using FSX

For more articles on flight simulation on my web site, click on the following links: Challenging virtual flights or Flight simulation

Categories
Screen captures

A first virtual flight in Papua New Guinea

Twin Otter departing the Jacksons International airport in Papua New Guinea
Twin Otter departing the Jacksons International airport in Papua New Guinea
Twin Otter turning on final for the Kokoda runway, Papua New Guinea
Twin Otter turning on final for the Kokoda runway, Papua New Guinea
Twin Otters parked on the Kokoda airport
Twin Otters parked on the Kokoda airport

Finally,few months after the creation of the AYPY scenery, I can now do a first flight in Papua New Guinea. The complete flight, which consists of thirteen pictures, can be found in the “flight simulation” section above, under “standard virtual flights”. Why “standard”? When we know the degree of difficulty of some Papua New Guinea runways, which are short and hardly accessible, a flight like this one is considered relatively simple and allows the pilots to familiarize themselves in that part of the world. The scenery is called AYPY Port Moresby Jacksons International and it has been created by Ken Hall and Tim Harris, from the Orbx company. Details regarding the flight can also be found in the virtual flight section above. Two words only to describe the experience: totally immersive. Have a good flight!

Categories
Screen captures

Intercepted!

Harrier intercepting a twin turboprop
Harrier intercepting a twin turboprop

The screen capture that you can see here has really not been planned. It is about the interception of a light twin engine aircraft by a Harrier military jet. After subscribing to an English virtual flying magazine, I received, as a welcome gift, this virtual military jet. As I was “in flight” familiarizing myself with the jet, I saw a little white dot moving in the distance. It was one of the numerous virtual aircrafts generated by the Microsoft Flight Simulator (FSX) program. The idea to simulate an interception and fly in formation with an unknown aircraft was just too good to resist. In few minutes, both aircrafts were in sight of each other. It was now a matter of adjusting the speed of the Harrier exactly with the other aircraft’s speed and progressively get closer. The picture represents the end result of this little meeting. The countryside under the planes is an ORBX creation.