The Havelstern is a chemical tanker sailing under Canadian flag which was built in 1994. Its draught is of 8.5 meters. It is photographed here on June 3rd 2017 in front of Quebec City, with Lévis in the background, heading to Point Tupper in Nova Scotia, Canada.
The Havelstern between Quebec City and Lévis on June 3rd 2017
Several vessels are visible in the picture above. In the foreground, it is possible to see the two chimneys of the Louis Joliet, a boat essentially used for tourist excursions. Then there is one of the two ferries constantly traveling between the south and north shore of St. Lawrence Seaway between Lévis and Quebec City.
The small boat riding by the Havelstern is used to carry one of the St. Lawrence Seaway pilots. A pilot who masters the navigation specifications on this part of the seaway boards the ship and takes control until he can transfer the control to another pilot farther down the seaway ( Pilotes du St-Laurent ). In the background is the second ferry used to carry passengers and cars from one shore to the other.
The full-frame camera used to take the pictures was a Canon 5DSR equipped with a Canon EF 70-200mm f/2.8L IS II USM lens. With a 5.0 aperture and the ISO set at 200, the shutter speed allowed was 1/1000 sec.
The Havelstern ship and île d’Orléans in the background, June 2017
While the tourists are having fun in Quebec City, the picture above shows the Havelstern heading to Île d’Orléans in a rain shower.
The picture below represents the Havelstern making a wide turn to navigate around the southern portion of Île d’Orléans. The ship was quite far away and some serious cropping would have to be done in order to enlarge the image. In order to get a picture that would not be blurred, I had to increase the shutter speed a bit.
The Havelstern ship is approaching Île d’Orléans in June 2017, heading to Point Tupper in Nova-Scotia
The ISO was adjusted to 200 and the focal length was set to 200mm. The aperture was only 4.0, allowing a shutter speed of 1/2500 sec.
For other pictures of ships on my website, click on the following link : Ship photography.
Mountain goats in the Jasper National Park, Alberta, Canada in 2014
The mountain goat’s winter protection becomes really unbearable during summer, especially when, like in 2014, the temperature rises to 38 degree Celsius in the Jasper National Park, in Alberta, Canada. Goats are looking a bit less photogenic.
The picture above, taken with a Canon 5D MKII full-frame camera, was taken directly on the side of highway 93 at a time when huge forest fires were destroying important areas of the National Park in 2014. The Park authorities were taking daily decisions as to the use of highway 93 between Lake Louise and Jasper. We had access to the Park because we were ready early in the morning and by 11 AM, the highway was again closed for the day.
The picture above represents an improvised artwork that was done on Willows Beach in Oak Bay, a municipality in Victoria, British Columbia. The work, created during a summer afternoon in 2014, was made slightly out of the way from the main activity area of the beach and, by luck, was not damaged after its author left the beach.
However, during the evening, while taking a walk, I saw that a group of young people had installed a volleyball net on the beach, not far from where the artwork was located. The players often sent the ball very close to where the eyes where so I decided to take a picture to immortalize the work.
Shells and rocks of multiple colours had been assembled by a real artist to give the eyes an extremely realistic appearance, full of life. You may note that the artist took care of designing the eyes of different size, as it is necessery to add a three dimensional effect. Few white shells had even been added near the centre of the eyes to add the reflection appearance and bring the eyes to life. A real artist creation!
A lifeguard makes sure that the ships keep on floating…
As I was completing a walk around Stanley Park, in British Columbia, I saw this lifeguard comfortably sitting in his chair and protected from the sun by a large yellow beach umbrella.
In the near distance, numerous vessels were anchored while waiting for the appropriate tide in order to reach Vancouver Harbour. Everything in the scenery was quiet.
However, reality was quite different since, when I got closer, I saw a huge beach loaded with swimmers in front of the lifeguard. The latter had to keep his eyes wide open.
A funnier approach was nonetheless to present the most tranquil scenery possible by avoiding to show the beach and the swimmers. This gave the impression that the lifeguard had the responsibility of watching the ships in the distance.
Slightly moving the skyline higher in the shot in order to only see the vessels and the lifeguard did the trick. This is the fun part of street photography.
For other street photography pictures posted on my site, click on the following link:
In 2018, marijuana will probably become a legal substance in Canada. But for now, it is still considered an illegal drug by Canadian authorities.
In the picture above, a “plant” dealer, acting as a “florist”, does not hesitate to publicize his business in British Columbia. He chose to modify the reality until it finally meets his goal.
The “florist” above proceeds in the same way as Sean Spicer, the White House Speaker, who gives new meaning to words during his press conferences in order to make sense of some of Donald Trump’s electoral promises.
Street photography is often unplaned, as it is the case here. But I had with me the necessary equipment to capture the van before it got away.
For other street photography pictures posted on my site, click on the following link:
Aerial view of the Rothera research station in Antarctica.
For this flight, you will need the Antarctica X flight simulation software made by Aerosoft.
The maintenance of BAS Twin Otters and their Dash-7 is done in Calgary, Canada, and head to Antarctica during the austral summer, between October and March. So if you want to try a flight simulation with a Twin Otter or a Dash-7 from Chile to Antarctica, pick one of those months as it is more realistic.
Since it would be a bit long to make all the virtual flights from Canada to Antarctica, I chose to do the last three legs to see what the landscape looks like.
A Twin Otter is normally approved for a maximum take-off weight of 12,500 pounds. But with skis weighing 800 pounds and additional fuel required to fly longer legs, BAS (British Antarctic Survey) has arranged to have their Twin Otters approved at 14,000 pounds. Even at this weight, the aircraft could still operate on one engine.
First, the aircraft departs La Florida airport (SCSE) in Chile, after a mandatory fuel stop before its next destination, the El Tepual de Puerto Montt airport (SCTE), also in Chile.
Airborne from La Florida, Chile, after refueling.
This virtual flight with the Twin Otter last about 4:25 hours (696 nm) with a heading of 185 degrees.
In flight towards El Tepual de Puerto Montt, Chile.
For the screen captures, FTX Global, FTX Vector and Pilot’s FS Global 2010 were installed. Orbx has also reworked the original El Tepual de Puerto Montt airport to include some people, aircrafts and new buildings. It makes for a more interesting destination.
Twin Otter on final approach for El Tepual de Puerto Montt, Chile.
Ready for refueling at the El Tepual de Puerto Montt, Chile.
The next flight is from the El Tepual de Puerto Montt airport (SCTE) to Punta Arenas (SCCI), both in Chile.
Twin Otter aircraft airborne and heading to Punta Arenas, Chile.
This flight, made low across the Andes, absolutely requires good weather. You will have to climb to 17,000 feet to make the direct route between the airports.
Twin Otter over the Andes climbing for17,000 feet
There are often spectacular views available to the virtual pilot. Yes, the BAS Twin Otter is flown by only one pilot, but there is always somebody else accompanying him.
Don’t forget to lean the mixture during the climb. Also use some additional oxygen (!!) if you don’t want to start singing and flying in circles after a while. Again, pay attention to the mixture during the descent, considering that you will be losing close to 17,000 feet.
Refueling at Punta Arenas, Chile.
The Punta Arenas airport, straight from FSX, is not an interesting airport to look at. It is a very bare airport, with just a single building and a VOR.
But since the BAS pilot do that mandatory leg just before heading to Antarctica, I chose not to change the route. The general direction for the flight to Punta Arenas was 164 degrees and the duration approximately 4:28 hours. You can obviously accelerate the process once the aircraft is established at its flying altitude.
The last flight is from Punta Arenas, Chile, to Rothera, Antarctica.
Twin Otter aircraft heading for the Rothera airport in Antarctica.
The Twin Otter will take between six and seven hours on an average heading of 162 degrees to cover the distance between Punta Arenas (SCCI) and Rothera (EGAR).
Over the snowy mountains of Chile towards Rothera, Antarctica
Carrying extra fuel on the flight towards Rothera, Antarctica.
The runway at Rothera is made of gravel and is 2953 feet long. That is plenty for the Twin Otter and the DASH-7. Before you make the flight, go into the aerosoft/Antarctica X file in your flight simulator and click on the “LOD 8.5” option (the default is at LOD 4.5). It will give you much better details when you are approaching Antarctica.
The antarctic Rothera research station is in sight
Twin Otter aircraft on final at Rothera, Antarctica.
The Airliner World magazine had an excellent article on the BAS operations in Antarctica in its March 2017 edition. It included plenty of interesting pictures and detailed explanations on what is expected from pilots and personnel working for BAS. I compared the Rothera virtual airport with the real one through the available pictures in Airliner World and was pleasantly surprised with the level of accuracy of the details.
A British Antarctic Survey Twin Otter aircraft is landing on the Rothera runway, Antarctica
The BAS always prepares itself for the worst: “[It] carries parts valued at around $5m, including a replacement engine for each aircraft, spare props and undercarriage components”.
Twin Otter aircraft after a landing on the Rothera runway, Antarctica
“A new development for the Air Unit has been its work with the RAF, using C-130 Hercules transports to airdrop supplies into the field. They fly from Punta Arenas and drop fuel to support our science programmes on the Ronne Ice Shelf. […] It is all part of their training system and the accuracy they drop to is very impressive. They might drop 250 drums, think how many Twin Otter trips that would have been for us (48 or more than 400 flying hours)”.
The main hangar in Rothera, Antarctica.
Aerosoft has made an excellent job in replicating the buildings in Rothera, BAS’s main research station in Antarctica. The biggest hangar can accommodate three Twin Otters and a Dash-7 altogether.
Inside the main hangar at the Rothera research station, Antarctica.
When your flight is over, do not forget to change the settings back to LOD 4.5 for Antarctica in your aerosoft/Antarctica X files.
Here is a night picture that speaks volume about the ambiance that generally prevails in Quebec City. Wherever he walks, the photographer will notice citizen and tourists admiring the town.
The photo was captured with a Canon 5D MKII full-frame camera equipped with a Canon EF 50mm f/1.4 fixed lens. This kind of maximal aperture allows to take pictures at this time of the day without the need of a tripod and without grossly increasing the ISO, thus protecting the picture’s quality. The use of a tripod is always giving better results, but for the occasions where the photographer does not have one with him, the maximal aperture of 1.4 (or even better 1.2 for the lucky ones) can save the day.
The stars surrounding the city lights do not result from using a special photography equipment. Instead, they are produced by the multiple elements present in the Canon EF 50mm f/1.4 fixed lens. Since every lenses available on the market are not of equal quality, some lenses naturally offer a much nicer bokeh than others.
It is quite difficult to obtain something else than human silhouettes when the light is so weak. The lower third of the image also proves to be a problem for the camera, as the luminosity created by the streetlights is much more intense. Nonetheless, it was not too difficult to correct the contrasts using an image editing software, since the photo was taken using RAW files.
For other photos on the province of Quebec and also Quebec City, click on the following links from my blog:
In 2017, Quebec City has opted for a decentralization of the Carnival activities which where always organized on the Plains of Abraham. Part of Grande-Allée was blocked to traffic and other activities where also held in the parc de l’Amérique-Française, the parc de la Francophonie and at Place d’Youville, in the hearth of the touristic sector.
Quebec Carnival 2017 symbols
This new formula seems to be a success, according to the number of people met during my photography sessions on the different sites. Children, as usual, were not really bothered by the cold temperature et found a way to have fun. The picture below was taken while the wind chill factor was -20C.
Child playing at the parc de l’Amérique-Française during the 2017 Quebec Carnival
The parc de l’Amérique-Française was receiving the international snow sculpture contest. Many countries were present: Argentina, Canada, France, Germany, Italy, Mexico, Morocco, Peru and the United States. Italy won the first prize with an excellence award from the Quebec Carnival, added to an award from the public and the benevolent staff. The Italian sculptors were Pietro Germano, Samuel Bonapace and Gino Casagranda. The picture below represents one Italian sculptor at work.
An Italian sculptor at work during the 2017 Quebec Carnival.
The second prize, with a Government of Quebec award, was offered to the team from France, who was composed of Pascal Veuillet, André Marastoni and Éric Margery. The pictures below show the work in progress and a French sculptor taking a few minutes to talk with a citizen. He does not seem too annoyed by the cold weather…
French sculptor at the 2017 Quebec Carnival
A French sculptor at the 2017 Quebec Carnival
The team from Canada won the third prize, with an award from Quebec City. In the team were Jessy Armand, Michel Proulx and Mathieu Béchard. The pictures below represent two of the Canadian sculptors at work.
A Quebec sculptor at work on the Canada snow sculpture during the 2017 Quebec Carnival
French Canadian sculptor at the 2017 Quebec Carnival
Some sculptures had a really original look. Instead of capturing the whole creation, I decided to frame a section of one of the sculpture in order to emphasize the artwork.
Section of a snow sculpture at the 2017 Quebec Carnival.
All the pictures have been taken using a Canon 5DSR full-frame camera equipped with a Canon EF 85mm f/1.2 II USM lens, with or without tripod, depending on the amount of light available. The picture above was shot using a 1.2 aperture to maximize the blurred effect in the background. It was then reworked using two different image editing softwares.
For a better idea of all the activites organized by the Quebec Carnival, head towards the following official and bilingual site: Quebec Carnival official site
For other photos on the province of Quebec and also Quebec City, click on the following links from my blog:
The Quebec Islamic community has just lost six of its members. I want to offer them my sincere condolances as a Quebecer from Quebec City and as a Canadian.
It is hard for me to realize that in my city, which is so beautiful and peaceful, such a tragedy can happen. But all the citizens who have lived the same tragedy in their city tell themselves the same thing. Talk about it to the French or the Berliners. Quebec is not different.
The Quebec City mayor, Régis Labeaume, was recently mentioning how good the statistics were in Quebec when it came to violent acts : there had been only one homicide in twenty-one months. And now, in full Quebec Carnival period, at a time where the City invites its citizens and tourists to get out and be together enjoying the winter season, one Quebecer attacks his peaceful compatriots.
The word « terrorism »
I do not know why exactly but it seems that the Sainte-Foy, January 29th 2017 murders that have just been commited will be classified as a « terrorist » act. Possibly because it targeted a specific community that has a different religion than the shooter. Or because the act is aimed at terrorizing people. Or both.
The word « terrorism » is popular. In United States, the Donald Trump government has just closed its boundaries to selected countries, in case a potential « terrorist » would arrive in USA.
It is easy to forget that there are American citizens already living in United States that are even more dangerous, those who kill tens of thousands of Americans yearly with all kinds of guns that they have the right to possess according to a Constitution that did not anticipate the consequences.
In spite of the blooshed that includes tens of children in schools, it is not « terrorism » so there are no drastic actions taken. Politicians talk and hesitate for weeks after a tragedy and then everything comes back to normal. The « terrorist » murder has obviously a much stronger social impact than any other murder. And it allows to disregard the widespread « laisser-faire » when it comes to the right of everybody in United States to acquire almost whatever he desires when it comes to guns and to use them at will. But if you come from Irak, now that’s dangerous!
A few nice Quebec City photos
I take the opportunity to post a few nice pictures of Quebec City, as I did for France after the terrorist acts. They have been taken with a Canon 5DSR. This is another way of saying to local citizens and tourists that Québec, as for Paris, Nice or Berlin, is a beautiful city, normally very peaceful and filled with happy people. And that we are not going to be told how to behave or think by the most violent and often mentally fragile individuals of our societies.
Bonhomme Carnaval and Château Frontenac, Québec 2017
The Price building, Québec 2017
Dufferin Terrace slide, Québec 2017
Snow, ice and wood creation made by a Sillery citizen in Quebec City in 2015.
The Hindenburg airship over Quebec in 1936. The Quebec bridge is visible in the background.
The particularly rare picture above shows the LZ129 Hindenburg airship just after it completed its flight over Québec, Canada on its fourth crossing of the Atlantic from Germany to Lakehurst, United States, on July 1st 1936. This fly-by had not been announced since the trip was normally done directly between Germany and United States.
The Hindenburg was the biggest airship in the world and it was destroyed in 1937 on the arrival to Lakehurst. The explosion of the hydrogen on board the airship caused the death of 34 passengers and crew members.
Far away, we can see the Quebec bridge, the longest cantilever bridge in the world, while it was the sole link between the two shores of the St-Lawrence seaway.
An excellent source of information (in French) can be found on the internet link included below. It recalls the citizen’s comments while the airship was approaching, the trajectory followed by the airship over Quebec City and how the citizens learned of the Hindenburg’s approach:
