Categories
Flight Simulation

Flight simulation: Homer (PAHO) ice runway with a DC-3 on skis, under FSX

DC-3 at the Homer (PAHO) virtual airport in Alaska (FSX)
DC-3 at the Homer (PAHO) virtual airport in Alaska (FSX)

If you feel like attempting a virtual landing on an ice runway, an opportunity is offered by ORBX through their Homer (PAHO), Alaska virtual airport. For the flight, I used the FSX platform but it could have been also done under P3D.

DC-3 on skis airborne from the Homer (PAHO) virtual airport in Alaska (FSX
DC-3 on skis airborne from the Homer (PAHO) virtual airport in Alaska (FSX)

The ice runway is just a short distance away from the regular Homer asphalted runway. The DC-3 is an excellent aircraft for the task since its approach speed is very low and it is one of the few virtual aircrafts equipped with skis.

A DC-3 on skis is turning final for the Homer ice runway in Alaska (FSX)
A DC-3 on skis is turning final for the Homer ice runway in Alaska (FSX)

If you want to try that flight, make sure to adjust the flight simulator configuration settings so that the Homer ice runway option is activated, otherwise you’ll end up under water…

In order to add a bit of challenge as well as winter realism, you can add a bit of crosswinds or some snow using the standard « heavy snow » option in FSX. The program PrecipitFX helps a lot if you are looking for a better definition of precipitations, be it snow or rain. For this flight, the Cumulus X program was also activated.

Cockpit view of a virtual DC-3 on final for the Homer (PAHO) ice runway in Alaska (FSX)
Cockpit view of a virtual DC-3 on final for the Homer (PAHO) ice runway in Alaska (FSX)
Virtual DC-3 on skis on short final for the Homer (PAHO) ice runway in Alaska (FSX)
Virtual DC-3 on skis on short final for the Homer (PAHO) ice runway in Alaska (FSX)
Virtual DC-3 on skis about to touch the threshold of the Homer ice runway in Alaska (FSX)
Virtual DC-3 on skis about to touch the threshold of the Homer ice runway in Alaska (FSX)

The short flight proved to be an interesting experience, since the runway was narrow and there were some crosswinds. I thought that it would be very slippery but it was not the case. Maybe one day Orbx, in association with the FSX Steam (Dovetail Games) professionals, will work at modifying the flight simulation platform and add a CRFI (JBI) index of .40 or less to increase the difficulty in slowing down and controlling the virtual aircraft?

A DC-3 on skis flying few feet over the Homer (PAHO) (FSX) ice runway, a product of the ORBX company
A DC-3 on skis flying few feet over the Homer (PAHO) (FSX) ice runway, a product of the ORBX company
A virtuel DC-3 on skis after a landing on the Homer (PAHO) ice runway in Alaska (FSX)
A virtuel DC-3 on skis after a landing on the Homer (PAHO) ice runway in Alaska (FSX)
A DC-3 virtual on skis backtracking the Homer (PAHO) ice runway in Alaska (FSX)
A DC-3 virtual on skis backtracking the Homer (PAHO) ice runway in Alaska (FSX)

As this flight is not a super though exercise, I have placed it in the “standard virtual flights”, in the flight simulation section of my website. For more of those flights, click on the following link: Other standard virtual flights

Have fun trying this one! Later on, I’ll present another ice runway located on Antarctica, which virtual scenery was made by Aerosoft. Even the C-17 Globemaster III is approved there…

For more articles on flight simulation on my web site, click on the following link : Flight simulation

Categories
Real life stories as pilot and FSS: learning how to fly

Night landing on an ice rink

(Precedent story: Accidental night flying…without night rating.)

The night flying rating was completed during the following weeks. I then had to accumulate hours of night flying, so I took advantage of a cold winter evening without clouds or wind to do a round robin trip from St-Jean-sur-Richelieu. I brought along three passengers in a Grumman Cheetah and headed towards the Eastern Townships.

The St-Jean-sur-Richelieu control tower was closed at the time of our departure. Runway maintenance followed an irregular schedule as the work was being done by civil servants from the municipality who were also responsible for street maintenance in the city. In cases where freezing rain fell, followed within hours by a significant cooling in the temperature, the runway condition would deteriorate rapidly. We sometimes had to wait until the next morning before a team came in and tried to bring the braking conditions on the runways to an acceptable level.

This is what I realized as I was taxiing towards the threshold of runway 29. The landing light illuminated what appeared to be a smooth and icy surface rather than a paved one. The braking index of the three runways provided by the city was useless. I still had the option to cancel the flight because there was no emergency. We could also accelerate slowly and use the rudder smoothly. The airplane would take off in seconds in the cold air.

I chose the second option, the winds being calm and the plane took off easily. Soon, we could see the lights of the surrounding towns. It was a smooth night ride for the passengers. After an hour of flight, we returned to the airport. The controls had to be dealt with carefully, in order to avoid any skidding. Aware that I was landing on an ice rink, and that there must not be any swerve to one side or the other of the runway, the approach was made as slowly as possible and the brakes were not applied after touch down. I let the aircraft gradually lose its momentum while rolling down the entire length of the runway.

I am convinced today that those passengers remember that night flight positively, if just for the beauty of the city lights and the absence of turbulence. It was also an interesting experience for me, as I was having the feeling of controlling a boat rather than a plane on a runway.

(Next story: The Commercial Pilot License – A flat on landing)

For other real life stories as a pilot, click on the following link: Real life stories as a pilot