A roll arcus cloud in development ahead of a thunderstorm approaching the Quebec Jean-Lesage airport in 2012.
Summer 2012. A very active cold front had been sweeping across the province and was about to hit the Québec Jean-Lesage international airport (CYQB). Considering the winds and the temperature spread, as well as the weather radar, it was obvious that it would be a very interesting show.
The Nav Canada control tower and flight information center (FIC) being collocated, the common stairway surrounding the tower became a privileged spot from where to take pictures. As a flight service specialist (FSS) on a short morning break, I grabbed my camera and headed outside on the stairway, just in time to see a line of roll arcus clouds arrive over the mountains to the north-west.
A roll arcus cloud ahead of a thunderstorm heading for Quebec City in 2012
The first showers started, quickly followed by strong gusty winds and hail. In order to protect myself from the severe weather, I just had to slightly change position on the stairway and use the tower as a shield. Satisfied with my shots, I abandoned my observation post and let Mother Nature express herself.
A roll arcus cloud in development ahead of a thunderstorm approaching the Quebec Jean-Lesage airport in 2012.
An arcus cloud ahead of a thunderstorm approaching the Quebec Jean-Lesage airport in 2012
An arcus roll cloud in delopment near the Quebec Jean-Lesage airport in 2012
Here is some information aimed at helping tourists visiting Toronto, who like photography and aviation, and would think of booking one day during their visit to head to the Toronto Lester B. Pearson international airport (CYYZ) for a plane spotting photo session.
Initial planning
If you can, get a scanner or download an app on your cell phone to get real time information on air traffic around the airport: you will then know in advance the type and nationality of inbound or departing aircrafts.
Search for websites giving you access to Toronto airport VHF frequencies and program your scanner if you decided to get one.
Have a look at different plane spotting websites for the Toronto airport: there are many precious advices from experienced plane spotters that will prove useful in heading to the best spots and avoiding common mistakes.
Print two or three maps of secondary routes around the airport so that you can orient yourself when there is a change in runway use due to different winds or if you use a taxi ride to move around the airport: the driver will always ask you details on how to get there since those secondary routes are not a common destination for him (and chances are that he will not know where to go if you ask him to head to threshold of runway 05. Basically, he needs road names, not runway numbers).
Cessna 560XL S5-BAV Toronto 2016
British Airways Boeing 777-236 G-ZZZA in Toronto 2016
Before leaving your Toronto hotel
Before you leave the hotel, look at the Toronto weather forecast, among them the TAF, to know the wind pattern for the day. The Nav Canada site has everything you need to know and there is a possibility to choose between coded or plain aviation language.
Don’t forget to bring many snacks as well as a bottle of water since you will possibly be at a good distance from a restaurant for many hours, depending on which runway is in use. The same goes for additional batteries and memory cards for the camera.
Don’t forget the scanner, the cell phone (to call a taxi driver or get access to the arrivals and departures information) and all the photo equipment needed, as well as an abnormally high number of clothing layers necessary in case of winter photography: eight hours almost immobile outside in February calls for an appropriate preparation if you want to appreciate your experience. If you economize on clothing, it is certain that you will have to shorten your photography session.
I chose February for its very interesting light and not for its temperature! Most of the shots in this article were taken in only one day at the Toronto airport, between 10h30am and 18h30.
American Airlines MD-82 N482AA final 05 Toronto 2016
From the hotel to the airport
If you chose to stay at a downtown hotel in Toronto, the best way to get to the Toronto international airport is to use the UP Express train, from the Union Station on Front Street. Its use is very simple and departures are made every fifteen minutes. In February 2016, the cost was CDN $44.00 for a return trip to the airport, while a taxi ride cost $130.00.
UP Express Toronto 2016
The UP Express ride only takes 25 minutes and the train stops at Terminal 1.
It is preferable to avoid using your car around the Toronto international airport since some secondary roads are private and no stopping is allowed. You will take more time to look for police than to enjoy your plane spotting photography session.
Once you are at Terminal 1
Once you exit the UP Express at Terminal 1, get your scanner and monitor the ATIS frequency (120.825) to get the latest information on the runways in use for take offs and landings. For my photo session, the ATIS announced that runway 05 and 06L were in use, both for arrivals and departures. I took a taxi, showed the map with secondary roads to the driver and within few minutes I was where I needed to be and started the photo session.
Air Transat Airbus A-330 C-GTSN Toronto 2016
A preliminary internet search allowed to discover that heavies mostly arrive from Europe during the afternoon et that runway 05/23 is favored for Emirates Airline Airbus A-380 arrival. I thus decided to position myself near runway 05 instead of 06L.
There are two or three quite isolated spots around the airport that provide interesting point of views for aircraft photos but that can present security problems for a photographer working alone with expensive equipment. Experienced plane spotters suggest that you should be accompanied by friends if you decide to opt for those spots (see the “plane spotting” internet sites suggested at the beginning of this article).
Emirates A-380 final for Toronto (CYYZ)
Emirates A-380 on final for Toronto (CYYZ) 2016
Emirates A-380 on final 05 for Toronto (CYYZ) 2016
Technical advices
For precise photos of aircrafts in movement, I use the following parameters with my Canon 5D MKII camera:
1. Only the central AF Point of the auto focus system is selected and not the surrounding ones in order to avoid that the camera sets the focus on other objects than what I desire (trees, ILS structure, buildings).
2. The AI Servo setting is more efficient than the AI Focus or One Shot. The aircraft will be followed precisely.
3. If I want to include surrounding objects in the photo, I adjust the aperture to 7.1 or 8, instead of 11 or 13. I thus avoid increasing the ISO too much, which would affect the picture’s quality if it has to be enlarged with Photoshop.
Westjet Boeing 737-8CT C-GWSV Disneyland Livery in Toronto 2016
4. To take pictures of an approaching propeller powered aircraft, a speed adjusted to 1/125 is generally adequate. You must pivot according to the aircraft movement so that it looks like it is immobile in your viewfinder. The picture is easier to take when the aircraft is farther away but becomes more of a challenge when it gets closer and flies by you since you must constantly change your pivoting speed.
Porter Q-400 C-GLQD on final for Toronto Billy Bishop airport (CYTZ) 2016
Air Canada DHC-8-102 C-FGQK Toronto 2016
5. A shutter speed that is too high will immobilize the propeller of an aircraft and make it look like the engine is not working, which will take away realism.
6. Throughout the day, position yourself so as to have the sun behind you (if there is any sun!), unless you are looking for special effects.
Global 5000 GL5T C-GJET in Toronto 2016
7. A very high quality lens, like the Canon 50mm 1.4, allows for beautiful pictures during the evening since there is no compromise on ISO, as the lens does not need much light. The grain size stays relatively small.
Air Canada Boeing 777 final 05 Toronto 2016
8. I use a very low ISO if the photo includes an interesting but far away aircraft, in order to be able to crop the picture with Photoshop. Since I cannot compromise on the speed to avoid a blurred picture, it becomes obvious that it is the aperture that pays the price.
Air Canada Airbus A-330 final 06L Toronto 2016
9. If the situation allows it, add visual references other than clouds to get a bit more variety in your aircraft photo collection.
Air Canada Boeing 777 final runway 05 Toronto 2016
10. Try a black and white photo if the cloud formation is particularly interesting.
C-GQBG CL-415 and cirrus clouds on a black and white picture
11. RAW+JPEG files allow for important adjustments when necessary. A JPEG only photo gives you little leeway when you want to correct mistakes or during problematic lighting conditions.
12. Variable sky conditions and constant direction winds are preferable for your photo session since the runway in use will not be changed in the afternoon and your pictures will benefit from different light intensity and cloud formations.
13. If you want to take the aircraft in relation to the ILS poles and you are looking for a symmetrical photo, just move few inches to the right or left while the aircraft is approaching or going away from you. You will also want to avoid that the horizontal poles of the ILS cut the plane and make it difficult to see.
Westjet Boeing 737-800 final 05 Toronto 2016
14. Have fun experimenting, like taking a shot just above your head while including other objects for added interest.
On the ILS 05 for Toronto 2016
15. Instead of always showing the whole aircraft, try a close-up view.
Air Canada Boeing 787-9 C-FNOI in Toronto 2016
16. The close-up view might be such that even passengers of an aircraft on final will look at you while you immortalize them.
United Express on final at the Quebec Jean-Lesage international airport.
17. Chances are that you will meet other enthusiast plane spotters in the same area as yours since they also prepared themselves for a successful photo session.
Westjet Boeing 737-800 C-FYPB in Toronto 2016
18. Since you are in Toronto, head to Toronto Harbour when you are back downtown. You will witness the air traffic surrounding the Toronto Billy Bishop airport (CYTZ), formerly known as Toronto Island, and possibly take some original shots.
Porter Q-400 C-GLQM and C-GLQB at Toronto CYTZ 2016
19. This is the photo equipment used for my Toronto airport plane spotting session: Canon 5D MKII camera and the following Canon lenses: EF 50mm f/1.4 USM, EF 16-35mm f/2.8L II USM, EF 24-70mm f/2.8L USM, EF 70-200mm f/2.8L IS II USM. No polarizer was used that day since I wanted to increase my margin of manoeuver with fast moving aircrafts under the February low intensity light.
Air Canada Rouge Boeing 767-300ER final 05 at Toronto 2016
American Eagle CRJ-701ER N523AE Toronto 2016
Aviation photography requires much planning for successful photos. But all your efforts will rapidly bear fruits once you are on site and you will not see time pass! Have a great plane spotting session and give me some news of your experience if you can!
Air Canada Boeing 767-375 (ER) C-FCAB in Toronto 2016
You can have access to other aircraft photos taken at Toronto through this link on my site: photo galleries/aviation only
For other articles on aviation and photography, click on the following link: Aviation photography
« A hymn to beauty, this is what photography is for me »
Cover of Matthieu Ricard’s book “An Ode to Beauty”
Matthieu Ricard is a Buddhist monk who spent over forty-five years in the Himalayas. Throughout the years, he has produced many photography books. He is a man of immense talent and what he produces is of a very high quality. His new book “An ode to beauty” is no exception.
For thirty years, he photographed with two Nikon FM2 cameras and then switched to a Canon EOS-1Ds and a Canon EOS-5D. The Canon lenses used for his pictures range from a 12-24mm zoom to 100-400 mm. Landscape photography requires that he adds graduated neutral density filters to his lenses in order to reduce the contrasts between sky and earth.
When Matthieu Ricard comes back from a trip, he says: “I work on the images so that I can recapture the feeling, the emotion, the colors and the light that I saw with my own eyes”.
Like many experienced photographers, the author studies the work of other photographers in order to always learn something new. About Matthieu Ricard’s images, Henri Cartier-Bresson wrote: “Matthieu’s camera and his spiritual life are one, and from this spring these images, fleeting and eternal”.
“An ode to beauty” is made of human situations, facial expressions and the changing lights of landscapes. The composition is well thought through.
Matthieu Ricard is clearly an expert: technically demanding photos are very well executed. There are, on his images, numerous magical moments, where the photographer had only a very short time to react. It is the case, for example, of a photo where the sun rays hit an ideal part of a mountain chain at the same time as a rainbow colors the dark clouds in the background.
It is a unique book, made of exceptional images reproduced with great care. Most images demand a lengthy contemplation. There is no “Photoshop” effect and saturated colors here: everything is perfectly balanced.
Thanks to this book, the reader can look at the planet Earth in a very different way.
The hot air balloon C-FNHP is being inflated at the St-Jean-sur-Richelieu festival in 2012
The Nav Canada flight service specialists (FSS) working at the flight information center (FIC) at the Quebec Jean-Lesage international airport (CYQB) regularly receive telephone calls from hot air balloon pilots preparing their next flight. Actual and forecasted wind conditions are important, be it on the ground or in the air. But the FSS must also take into account the slightest possibility of a rain shower that would wet the balloon’s envelope, the variation in the convection according to the time of the day which would then affect the winds, the local effects, etc.
Although it is interesting to brief a hot air balloon pilot on the telephone, it is far better to witness their activity when getting ready for a flight. And the effect is even more striking when you position yourself in the middle of a field where more than a hundred hot air balloons lift altogether.
A first group of hot air balloons are autorized to lift at the St-Jean-sur-Richelieu festival in 2012
Summer 2012. A beautiful day was expected in St-Jean-sur-Richelieu. Blue sky and calm winds were forecasted for the evening. There would certainly be photo opportunities (Canon 5D MKII).
The field where the balloons were being prepared was fenced, but there were here and there openings and it seemed possible to enter the area without attracting too much attention. I made an attempt and could rapidly live the frenzy associated with the preparation and launch of more than one hundred hot air balloons.
Rising hot air balloons in St-Jean-sur-Richelieu in 2012
The balloons progressively took shape and it became possible to see their designs and superb colours. Each team was taking care of the last details that ensure a synchronized launch when the signal would be given. The organizer eventually gave the go ahead signal and the hot air balloons all lifted up within a very short time span. This was a magnificent show!
Hot air ballons at the St-Jean-sur-Richelieu Festival in 2012
Visitors at the 2012 St-Jean-sur-Richelieu hot air balloons festival
Few years earlier, during summer 2005, a hot air balloon had flown over our house in Quebec City at about one hundred feet. This was not a normal situation to witness that balloon slowly lose altitude and get closer to electrical wires. I had taken my bike and followed the balloon since it became obvious that the pilot was trying to land, possibly short of propane gas.
The pilot did not have an easy task, flying low over the city streets, close to the wires and other obstacles. The passengers must have been wondering what would be the issue of that flight. Arriving near a school, the pilot had seen a small parking lot and tried to land there, avoiding the church steeple on the other side of the street.
We were few citizens to hang to the basket and immobilize it while the balloon’s envelope was slowly deflating. I was able to take a shot of that unusual balloon’s approach…
Hot air balloon landing on a Quebec City street in 2005
Nav Canada control tower with, in the foreground, several CL-215 and Cl-415, a Nav Canada Challenger, and an Air Transat Airbus at the Quebec Jean-Lesage international airport (CYQB).
On a stormy summer day, Air Canada called the Nav Canada flight information center (FIC) at the Quebec Jean-Lesage international airport (CYQB) on the Montreal frequency. The pilot was flying an Airbus and was about to take-off from the Montreal Pierre-Elliott-Trudeau international airport to Halifax, but there was violent weather that had to be avoided.
Normally, big airlines have their own briefing and flight planning services. However, rapidly changing weather sometimes requires last minute adjustments. In the case of the Air Canada flight, severe thunderstorms forbid a direct path from Montreal to Halifax. The pilot was looking for the best option: go around the thunderstorms by flying north over Mont-Joli then eastward to Halifax or fly southward to United States then head east to Halifax.
Both solutions were possible but the objective was to pick the route that would diminish the pilot’s chances to have to divert to an alternate airport.
Radar imagery became the essential tool to propose a solution. Knowing the time lapse between two images, it was possible to evaluate the weather system’s speed. By calculating what was the distance left for the system to arrive in Halifax, and knowing the system’s speed, the flight service specialist (FSS) was able to estimate as precisely as possible the time when the thunderstorms would move over the destination airport.
The pilot having calculated the estimated time of arrival to Halifax for both the south and north routes, and now knowing at what time the weather system would be over Halifax, he understood that the best option was the southern route through United States. If there was no last minute modification in the system’s speed, he would be able to land in Halifax between twenty and thirty minutes before the first thunderstorm cells arrive over the airport.
It is fairly uncommon to receive an official feedback from the pilot of a big company like Air Canada. But the next day, surprising the flight service specialist (FSS), the pilot called back, presenting himself as the one who had made a flight from Montreal to Halifax the precedent day. He wanted to thank the FSS who had helped him in his decision making since, as he said it, the route via the United States had been a success and he was able to land his Airbus thirty minutes before the arrival of the thunderstorms. That kind of call certainly helps any employee to start a working day on the good foot…!
The Nav Canada flight information center (FIC) in Quebec City (CYQB) does not normally take calls from the general public since air traffic services are centered on the needs of pilots.
But a particularly urgent situation sometimes dictate a more flexible approach. I remember a telephone call we received on the 800 line, during a very hot summer day of 2007. A worker in charge of the installation of dynamite in a mine in the Abitibi region told the flight service specialist (FSS) that he was working for a big company and that an important blasting operation was to be undertaken soon. He was in the middle of the blasting site, having just completed the installation of the detonators and explosives on the whole area.
He was wondering if there could be something he did not know about the weather since there were very dark clouds coming his way. The flight information center FSS was aware of the meteorological situation in Abitibi, and it was certainly not appropriate for a blasting operation. The caller was told that gigantic thunderstorm cells were forming in his sector and that the lightning detectors were already recording hundreds of strikes.
His actual position, in the middle of detonators and dynamite, was certainly problematic, to say the least. Without asking anything else, he told us that he was getting out of the site quickly…
Thomas B Reverdy’s book cover: Il était une ville (Once Upon a Town)
« Il était une ville » is Thomas B. Reverdy’s new novel. His precedent work, « Les évaporés », published in 2013 by Flammarion, won him the Grand Prix de la SGDL and the prix Joseph Kessel.
« Il était une ville » allows the reader to approach in a different and very interesting way the brutal collapse of Detroit in the United States. The consequences of the 2008 financial crisis on people of all ages and status is very well demonstrated.
Through multiple stories unfolding at the same time, the reader is able to live how it felt to be in Detroit during that critical period, for citizens of all social classes who stayed either by choice or because they had no other option.
Thomas B. Reverdy’s high-quality writing style is particularly refreshing and full of surprises. The reader is immersed deep in a Detroit which, instead of being the dynamic city around which the suburbs conglomerated, became a black hole from which escaped the citizens that could afford it.
Without being a historical novel, it is nonetheless a work that aims to do something more than to simply entertain the reader. I completed the reading of this book with new knowledge on the multiple life aspects of people living in a suddenly deserted megacity.
A rare book, surprisingly mature for such a young writer.
Well, let’s start with a real life video showing that there is no margin for error when landing in St.Barths :
In that video, you can clearly see that the speed on the approach seemed excessive and the aircraft floated precious seconds over the runway. Very soon, there wasn’t enough runway left to stop the aircraft safely. So the trick is to use a reasonable approach speed and be ready to do a missed approach if the wheels do not touch early on the runway.
40014 Runway in sight at St Barths TFFJ on the left and in the middle of the island (FSX)
40015 A Solomons Twin Otter is on final for runway 10 at St Barths TFFJ (FSX)
An approach with a virtual aircraft of your choice can be done in St.Barths (TFFJ) since FlyTampa St Maarten scenery includes that airport. I tried a circuit with the Aerosoft Twin Otter, under FSX, and it went very well, since this aircraft can fly at a very low speed and can break on a dime. It might have been a different story with the same aircraft that pilot was flying in the video…
Cessna 208B N208SG landing at Saint Barthelemy Airport, Guadeloupe (on aviation postcard)
40016 The Twin Otter is now on short final for runway 10 in St Barths TFFJ (FSX)
40017 The Twin Otter lands on the threshold of runway 10 at St Barths TFFJ (FSX)
For your information, the St.Barths 10-28 runway is 2133 ft long. For the landing, the winds where blowing from 031/10G20, which provides for a good crosswind. The biggest aircraft to have landed in St Barthélémy is a Canadian built de Havilland DHC-7.
40021 A bit of sand is blown on tourists in St Barths TFFJ (FSX)
40022 A Solomons Twin Otter leaves the runway at St Barths TFFJ (FSX)
Good luck and have fun trying out that virtual flight!
Old Quebec airport terminal with an Air Canada DC-9 and a QuebecAir BAC 1-11 (on aviation postcard)
Around 1996, during the summer, an Air Canada DC-9 captain visited the Transport Canada flight service station in Québec City (CYQB) to receive a last minute briefing on the weather conditions between Quebec and Toronto.
All the passengers were already on board, but the captain had noticed a rapid change in the size of thunderstorms approaching the Québec City airport. Wishing to make the best decision, he requested the latest information on the approaching line of thunderstorms before proceeding with the takeoff.
The weather radar and satellite pictures showed a wall of convective cells that a DC-9 would not be able to go through. It would not fly high enough nor be able to go around the system unless it made a detour through Val-d’Or to the north or the Tennessee to the south.
The captain already knew the consequences of his decision. He nonetheless took the phone and called Air Canada’s dispatch in Toronto, announcing that he would not leave Quebec until the weather was acceptable. He could envision the missed transfers in Toronto for most of his passengers, and their bad mood in face of the lengthy delays he expected in Québec City.
Nevertheless, his decision was made and he left the flight service station satisfied. He knew very well that a line of heavy thunderstorms had often been the cause of accidents and that no aircraft, whatever the size, was safe when dealing with a wall of severe thunderstorms.
The flight service specialists (FSS) were happy with the captain’s decision since, throughout the years, the FSS often witnessed far less commendable behaviour from pilots of all categories. Judgment is the capacity to evaluate consequences, and it is not given to everybody.
April 2013, at the Nav Canada Flight Information Center (FIC) in Québec City. This morning’s meterological forecasts indicate the possibility of dust devils. This type of obstacle to visibility is rare. The pilots call the flight service specialists (FSS) to know what “PO” means on the weather charts.
In spite of the calm winds and blue sky all over southern Quebec, the weather conditions can give birth to local wind shears. If they lift sand, dust or other small particles, those wind shears will become visible and cause dust devils five to ten meters in diameter.
A pilot would have to be unlucky to cross a rare dust devil. However, I remember an event I witnessed thirty years ago while I was working at the Transport Canada Rouyn-Noranda flight service station.
On a hot summer day, an aircraft landed in Rouyn-Noranda after a cross-country flight from Montreal. The pilot was making a short stopover to have his logbook stamped at the flight service station. The weather conditions were ideal at the airport: dry air, calm winds and a cloudless sky.
Once his run-up was completed on the taxiway, the pilot slowly headed for the runway 26 threshold. Once aligned and ready for take-off, he made the last few adjustments.
Few seconds later, the flight service specialists heard an emergency locater transmitter signal. Looking again at the runway, they saw that the aircraft was still on the threshold, but upside down.
A strong windshear had overturned the single-engine aircraft. The airport wind speed indicator being located farther away from the threshold only indicated calm winds.
The souvenir of this story reminded me that nature can always surprise the best prepared pilot. I imagine that this event shocked the student pilot as he tried, like us, to figure out what had just happened. I do hope that this adventure did not discourage him from flying.
