An Airbus A340-500 on final for the Denver international airport
An Airbus A340-500 is landing at the Denver international airport
The two screen captures show a CLS Airbus A340-500 CLS on approach for a landing at the Denver international airport. This airport has been created by Flightbeam Studios. The shadows on the ground are possible through the Cumulus X software. If you want to obtain those effects, ensure to set the cloud cover to “scattered” clouds, so that the sun can reach the ground and create thermals. FSX is the platform I used, and the clouds are managed by REX.
The CLS Airbus A340-500 replicates quite well the inertia that a pilot has to deal with in real life. The engine sound is also quite interesting. Naturally, this virtual aircraft is dating a bit, so don’t expect to obtain multiple original angles if you like to press that V key while flying.
Soon, a special flight will be added to the “flight simulation” section, under “challenging virtual flights”. A KLM MD-11 is doing a passenger flight between Palm Springs (KPSP)and the St Maarten (TNCM) airport, using FSX and Cumulus X, as well as Orbx Vector and Global. St Maarten is known for its spectacular approach over a beach loaded with tourists and many videos are available on You tube for those of you who would be interested.
The Palm Springs airport is an Orbx creation and the virtual St Maarten is designed by Fly Tampa. The virtual MD-11 comes from PMDG. I chose to do a virtual passenger flight with the KLM MD-11 to emphasize the termination, on October 26 2014, of this type of aircraft for carrying passengers. KLM was the last company to use a MD-11 for that type of transport and the last flights were made from Toronto and Montreal to Amsterdam Schipol durant last October. Thanks to flight simulation, virtual pilots will always have the opportunity to fly this exceptional aircraft.
Piper Tomahawk PA-38 airborne from runway 28 at the Montreal Pierre-Elliott-Trudeau international airport, with the Montreal terminal in the background. (FSX)
All student pilots must practice touch-and-goes for hours . FlyTampa Montreal scenery for FSX, used jointly with MyTraffic2013 software and real weather makes for a realistic exercice for anybody who knows the metropolitan area around Montreal.
Piper Tomahawk PA-38 airborne from runway 28 for a left hand circuit at the Montreal Pierre-Elliott-Trudeau international airport (FSX)
A small aircraft like the ALABEO Piper PA-38 Tomahawk is a perfect choice. I chose a left hand circuit for runway28 since it allows a nice view of the terminal when taking-off or landing. Fly Tampa Montreal allows the virtual pilot to see local landmarks when flying around the airport, like the olympic stadium, the St-Joseph’s Oratory and Place Ville Marie.
Piper Tomahawk PA-38 on downwind for runway 28 at the Montreal Pierre-Elliott-Trudeau international airport (FSX)
Piper Tomahawk PA-38 turning on final for runway 28 at the Montreal Pierre-Elliott-Trudeau international airport (FSX)
Piper Tomahawk PA-38 on final for runway 28 at the Montreal Pierre-Elliott-Trudeau international airport , while Westjet is rolling on runway 06R (FSX)
On downwind 28, if you fly during winter, you will be able to see that only parts of Lac St-Louis are frozen. On left base, Air Canada and Bombardier very well rendered buildings are visible. If you had landed on runway 24L, you would have seen other well known company names posted here and there on the surrounding buildings. That is a really well made scenery.
Piper Tomahawk PA-38 and the Bombardier and AirCanada buildings at the Montréal Pierre-Elliott-Trudeau international airport (FSX)
Piper Tomahawk PA-38 about to leave runway 28 of the Montréal Pierre-Elliott-Trudeau international airport (FSX)
The use of My Traffic software allows aircraft movements around the airport during your exercice; that makes the experience even more interesting. You will also be surprised by the realism in the depection of the snow patches along the runway sides when you are on the approach. So, have fun with this easy exercice in a really interesting setting made available by Fly Tampa Montreal.
Piper Tomahawk PA-38 parked at the Montréal Pierre-Elliott-Trudeau international airport (FSX)
For more articles on flight simulation on my web site, click on the following link : Flight simulation
De Havilland Canada DHC-7 Dash 7 over the Kokoda trail in Papua New Guinea
Steep turn made by a Dash 7 (FSX) landing in Kagi, Papua New Guinea
If you are looking for a real challenge, try a flight from Kokoda airport to Kagi, using a DHC-7. Kagi is situated along the Kokoda Trail in Papua New Guinea. The runway has a 12.5 degree slope and is approximately 447m long (1466 ft). The airstrip’s altitude is about 3900 ft msl. You will need the ORBX scenery (AYPY) Jacksons Airport made by Ken Hall and Tim Harris, as well as other Orbx products such as Global, Vector and Holgermesh to do the flight and obtain the same views as above. In order to find the airports, two maps are included in the “User documents” included with AYPY.
A Dash 7 (FSX) on final for Kagi, Papua New Guinea
I adjusted the fuel at 50% in each tank. For payload, I used 5 passengers and luggages. Obviously, the aircraft could have been loaded with many more passengers and cargo. But since it was a first trial at Kagi with a Dash 7, I thought that a lighter payload would increase my chances of a successful landing by reducing the approach speed.
A United Nations Dash 7 after landing uphill on runway 07 in Kagi, Papua New Guinea
The landing in Kagi is made on runway 07 and the takeoff on runway 25. From Kokoda airport, follow the Kokoda trail then, when appropriate, make a right turn toward Kagi. There are few airports within a small area so it can get a bit confusing. The best way is to overfly the area slowly to ensure that what you see in flight and what is on the map are both the same airport.
The two most difficult aspects of the approach are the steep turns required while flying close to the mountains in slow flight configuration, that is to say with full flaps and wheels out. The second problem to keep in mind is the sloped runway: 12.5 degrees is not negligeable. But once you are on the runway, the Dash 7 will almost stop by himself due to that slope. The takeoff on runway 25 is not a problem with that aircraft: with such a sloped runway, you will be airborne in no time.
A United Nations Dash 7 ready for takeoff on runway 25 in Kagi, Papua New Guinea
De Havilland Dash 7 airborne from Kagi
I am convinced you will enjoy this demanding flight. There are lots of plants and trees included in the scenery, so it makes for a very realistic approach. Have fun and make sure your passengers will still have a smile on their face when they get out of the airplane!
FedEx MD11 in flight (FSX). This virtual aircraft is made by PMDG.
TheMD-11 is an extremely interesting aircraft with regards to its characteristics but many pilots have had problems to master all its interesting features in real life. It’s partly for that reason that there has been many crashes with this type of aircraft. Considering the MD-11 high fuel consumption, FedEx will progressively start selling them, starting 2015. The only company in the world still using the MD-11 to carry passengers is KLM (edit: it did the last flight with passengers in 2015). The MD-11 is remembered for the Swissair 111 crash, near the coast of Nova-Scotia, on Septembre 2nd, 1998. It was flying the New-York to Geneva leg when the accident happened: 229 persons perished when the aircraft plunged into the sea.
The above screen capture has been edited to give it a more realistic effect and to emphasize the quality of light at dusk. Different images, under many company colors, can be found on this website under the « flight simulation” category, within the ” virtual pictures » section. A flight from Mexico City Intl to Denver Intl will soon be included in the « challenging virtual flights » section. Have a good visit!
View of a small portion of the Transport Canada Training Institute in Cornwall, Ontario, in 1982
In the early 80s, the oil crisis forces airlines to greatly limit hiring. This was not the case during our pilot training course but becomes a reality when applying for a job a year later.
However, on the government side, the situation is quite different. The air traffic services branch of Transport Canada is looking for new employees to replace staff approaching retirement age. The only option immediately accessible to me is to apply as a flight service specialist (FSS). I have only a rough idea of what are the responsibilities, nothing more. But the pay and advantages are far better than what is otherwise available to a new flight instructor. It is time to send in an application.
For the Province of Quebec, two written examinations totally unrelated with aviation are held at the University of Quebec in Montreal. There are 1500 candidates (5 sessions of 300 applicants) who attempt these tests during the two days allotted for the first phase of the selection process. In the following weeks and months, those who have succeeded in the written tests must then undergo anything from personal interviews to language tests, medical examinations and security clearances.
We are now three candidates from Quebec heading towards the Transport Canada Training Institute in Cornwall. There will be thirty-five hours of theoretical and practical course per week, over a six months period. The pressure will be continuous and desired in order to eliminate candidates who may not react well to stress.
We will be paid to study. A candidate is guaranteed with a posting upon completion of training, providing he manages to obtain 80% and above on the written and practical evaluations. Because this 82-01 course is not dedicated to Quebecers only, it cannot be offered in French. So it is going to be in English only, and will include twenty-four students from almost all Canadian provinces.
The Transport Canada Training Institute in Cornwall is nothing short of exceptional for those who have decided to study and succeed.
In order to help the student to deal with the weekly thirty-five hours of courses and examinations, the school provides interesting amenities.Each student has a private room with daily maid service. The cafeteria offers a good choice of meals. Calories can be burned at the pool, gym, weight room, on the tennis court or on the baseball field. A snack bar remains open for late-night cravings. A bank teller is made available to students, as well as a hairdressing salon, a bar, arcade games, pool tables, etc.
1982 Cornwall TCTI Pool
Transport Canada Training Institute weight room. Cornwall, Ontario 1982
1982 Cornwall TCTI combat room
1982 TCTI, Cornwall. Students from the FSS 82-01 group are experimenting a new way to improve scoring at basketball.
1982 Cornwall TCTI games
So that we understand what lies ahead, we are told that there are traditionally many students in each class who will not keep pace and will be sent home, despite their efforts. For a francophone who wasn’t using a second language on a daily basis , it is clear that integrating new theory presented in English for seven and a half hours every day, five days a week, becomes demanding. I compensate for the times when my attention decreases by studying in the evening.
There is a library in the school as well as multiples rooms for flight simulators designed for every career considered by the students.
1982 Cornwall TCTI Flight Simulation Room
1982 TCTI Cornwall. Environment Canada upper air building.
1982 TCTI Cornwall Stevenson screens
In the courtyard, there is a peacock and other small animals and a water source flows into a very well planned landscape.
1982 Cornwall TCTI courtyard
The amenities are simply stunning. The message is clear: “Transport Canada only ask you to study and succeed, it will take care of the rest.”
1982 Cornwall TCTI corridors to classrooms
Finally, the moment we were all waiting for as arrived. Students who managed to get through the course celebrate their graduation.
Assignments are distributed. Those who will be working in isolated postings, in northern Quebec, are well aware that the schedule does not include holidays. The FSS will be on duty every day. The new employee will be compensated for overtime and a more expensive cost of life. He will also benefit from subsidized rents.
My departure is planned shortly for Inukjuak (CYPH), along the east coast of Hudson Bay in the Nunavik. Life will soon change radically.
(Next story: enroute to the first posting: Inukjuak)
Many pictures and articles have been added during the past few weeks. The last addition to this site can be found in the “flight simulation” section, under “standard virtual flights”. It’s a flight using FSX from Redding (California) toward Sekiu (Washington State). To make it easier for those of you who would like to try it, I’ve added the approach and stall speeds. The Phenom 100 is surprisingly easy to fly because it is a light jet with a low approach speed. It constitutes an excellent small jet for the pilot who wishes to transfer from piston engine aircraft toward jets. The virtual Phenom 100 is made by Carenado and the scenery by Orbx.
François
Phenom 100 turning toward Clallam Bay, inbound for the Sekiu airport
A Pitts Special on an inverted flight over the Monterey airport, California (FSX)
Here is a screen capture added recently to the flight simulation section, under “virtual pictures”. The Pitts Special was designed in Wyoming and the first one was built in 1971. This aircraft has won more open competitions in United States than any other type. Everyone who has flown the Pitts Special praise its quick reactions at the slightest pressure on the controls. In the actual scene, the aircraft is over the Monterey airport, a creation of Orbx for theFSX platform.
The screen capture that you can see here has really not been planned. It is about the interception of a light twin engine aircraft by a Harrier military jet. After subscribing to an English virtual flying magazine, I received, as a welcome gift, this virtual military jet. As I was “in flight” familiarizing myself with the jet, I saw a little white dot moving in the distance. It was one of the numerous virtual aircrafts generated by the Microsoft Flight Simulator (FSX) program. The idea to simulate an interception and fly in formation with an unknown aircraft was just too good to resist. In few minutes, both aircrafts were in sight of each other. It was now a matter of adjusting the speed of the Harrier exactly with the other aircraft’s speed and progressively get closer. The picture represents the end result of this little meeting. The countryside under the planes is an ORBX creation.
Welcome to my new web space. It’s a very humble site for the moment as I am developing it at the same time that I am learning WordPress. Once my site is completed, you will find quality photos and insights into improving your photography skills. This site will also contain information about aviation, flight simulation, weather and flight information services (FSS). I will be uploading real life stories about flight information services spanning over thirty years of experience in Quebec and Canada’s North. These stories will be accompanied with photos that I took over the years. I will also share my passion for books.
I am looking forward to your visit in the coming weeks.
