Categories
Flight Simulation

A serious training session is mandatory with the Pilatus PC-21 before attempting a landing in Fairoaks

A Pilatus PC-21 aircraft over Shoreham, United Kingdom
A Pilatus PC-21 aircraft over Shoreham, United Kingdom
Near the Fairoaks airport, United Kingdom. Flaps and gear down on the Pilatus PC-21
Near the Fairoaks airport, United Kingdom. Flaps and gear down on the Pilatus PC-21

The IRIS Pilatus PC-21 Pro Training Series is a high performance aircraft. It is equipped with a five blade graphite propeller as well as a Pratt-Whitney PT6A-68B engine able to develop 1600 SHP. Until the PC-21 was created, there were only jet aircrafts that could provide such performance when it comes to pilot training. The PC-21’s maximum airspeed is 370 knots, its service ceiling 38,000 feet and it can climb at a rate of 4000 feet/minute.

PC-21 aircraft near the Fairoaks airport, United Kingdom
PC-21 aircraft near the Fairoaks airport, United Kingdom

The above sequence of pictures represents a familiarization flight with that aircraft, before trying to attempt to land in Fairoaks. I have included this flight under the “flight simulation” section of the site, under “standard virtual flights”.

PC-21 turning final for Fairoaks airport, United Kingdom
PC-21 turning final for Fairoaks airport, United Kingdom

The takeoff was done from Southampton and the route included Shoreham, Gatwick, Heathrow to finally end in Fairoaks. Along the route, different exercises were practiced like slow flight, inverted flight and other manoeuvers that allowed to learn the behavior of the machine under all kind of configurations.

PC-21 aircraft on final for the Fairoaks airport, United Kingdom
PC-21 aircraft on final for the Fairoaks airport, United Kingdom
A PC-21 aircraft and the Fairoaks airport, United Kingdom
A PC-21 aircraft and the Fairoaks airport, United Kingdom

IRIS created that virtual Pilatus. ORBX is responsible for the Southampton, Shoreham and Fairoaks virtual airports, as well as sceneries generated by their well known Global, Vector, Open LC and Trees HD products. FSX was used for the flight. Clouds were generated by REX and CumulusX. For an even more realistic experience, UK2000 virtual airports like London Gatwick and London Heathrow could have been used since they are of excellent quality.

Pilatus PC-21 on the Fairoaks airport (FSX)
Pilatus PC-21 on the Fairoaks airport (FSX)

Beware of the approach in Fairoaks. There are trees near the threshold of the runway and the landing surface is relatively short, measuring only 813m (2667 feet). Flying an aircraft equipped with such a powerful engine and whose stall speed approximates 150 kmh with flaps and gear down will require much attention on the approach. It will be the difference between a successful landing or having your name in the first page of Fairoaks local newspaper the next day.

For other ideas of virtual flights that do not require a lot of experience, click on the following link: Standard virtual flights

For more articles on flight simulation on my web site, click on the following link : Flight simulation

Good luck!

Categories
Flight Simulation

Flight simulation: Parry Sound (CNK4) to Toronto Billy Bishop (CYTZ)

Flying over Toronto downtown shortly before the landing in Toronto Island (CYTZ)
Flying over Toronto downtown shortly before the landing in Toronto Island (CYTZ)

I recently added, in the standard virtual flight section, a flight leaving Parry Sound for Toronto Billy Bishop.Here is an opportunity to learn a bit more about the Great Lakes region in Ontario. The Parry Sound airport, from ORBX, is a first creation by Vlad Maly for this province. The runway length is 4000 feet. Just beside the airport, there is a lake, Robert’s Lake (CRL8), with many cottages, floatplanes and sailboats that are visible when you select the appropriate season. The lake also offers 4000 feet for takeoffs and landings.

The actual flight has been made while the clouds were low enough that the flying altitude forbid the adequate reception of the Toronto Island (Billy Bishop) NDB (257khz) in the first half of the flight. A touch-and-go was made at Toronto International (CYYZ). MyTraffic2013 provided the airport with many AI aircrafts. Once over downtown Toronto, it was now time for Pilot’s FS Global 2010 to automatically install a maximum of buildings, for more realism.

On final for the Toronto Billy Bishop (Toronto Island) airport (CYTZ)
On final for the Toronto Billy Bishop (Toronto Island) airport (CYTZ)
Landing at CYTZ with the CN tower in the background (FSX)
Landing at CYTZ with the CN tower in the background (FSX)

Finally, theToronto Billy Bishop (formerly Toronto Island) was modified by ORBX in order to make it more interesting and alive. You will thus find, on arrival, some staff to take care of the refueling process. Somes vehicules have also been added. Naturally, MyTraffic2013 took charge of AI aircrafts as CYTZ is quite a busy airport and needs some air traffic to enhance the realism.

Time to refuel at Toronto Billy Bishop (CYTZ)
Time to refuel at Toronto Billy Bishop (CYTZ)

I wish you a good flight, if you wish to try it out. I would suggest though, for a more interesting experience, that you install ORBX FTX Global Vector on your computer, as the Microsoft Flight Simulator (FSX)software does not do a good job when it comes to representing the Great Lakes area. ORBX Open LC for North America further improves the flying experience.

For more articles on flight simulation on my web site, click on the following link : Flight simulation

Categories
Screen captures

The F14 Tomcat (FSX) and the Palm Springs (KPSP) virtual airport, USA

F14 Tomcat inbound to the Palm Springs airport (FSX), USA (KPSP)
F14 Tomcat inbound to the Palm Springs airport (FSX), USA (KPSP)

Here is an edited screen capture that was added recently in the “flight simulation” section above, under “virtual pictures”. This virtual flight was made using Microsoft Flight Simulator (FSX). The scenery, very well executed by Orbx, represents the Palm Springs region, in United States. It is the most recent addition to the collection of virtual airports available for the California region. The F-14, made by Dino Cattaneo, is a freeware (check the free download links that is provided). This combination of plane and airport is certainly going to please the virtual flight enthousiast!