Categories
Aviation photography

Aviation photography: plane spotting at the Toronto Lester B. Pearson international airport (CYYZ)

Air Canada Airbus A330-343 C-GHLM in Toronto 2016
Air Canada Airbus A330-343 C-GHLM in Toronto 2016

Here is some information aimed at helping tourists visiting Toronto, who like photography and aviation, and would think of booking one day during their visit to head to the Toronto Lester B. Pearson international airport (CYYZ) for a plane spotting photo session.

Initial planning

If you can, get a scanner or download an app on your cell phone to get real time information on air traffic around the airport: you will then know in advance the type and nationality of inbound or departing aircrafts.

Search for websites giving you access to Toronto airport VHF frequencies and program your scanner if you decided to get one.

Have a look at different plane spotting websites for the Toronto airport: there are many precious advices from experienced plane spotters that will prove useful in heading to the best spots and avoiding common mistakes.

Print two or three maps of secondary routes around the airport so that you can orient yourself when there is a change in runway use due to different winds or if you use a taxi ride to move around the airport: the driver will always ask you details on how to get there since those secondary routes are not a common destination for him (and chances are that he will not know where to go if you ask him to head to threshold of runway 05. Basically, he needs road names, not runway numbers).

Cessna 560XL S5-BAV Toronto 2016
Cessna 560XL S5-BAV Toronto 2016
British Airways Boeing 777-236 G-ZZZA in Toronto 2016
British Airways Boeing 777-236 G-ZZZA in Toronto 2016

Before leaving your Toronto hotel

Before you leave the hotel, look at the Toronto weather forecast, among them the TAF, to know the wind pattern for the day. The Nav Canada site has everything you need to know and there is a possibility to choose between coded or plain aviation language.

The Environment Canada site is also very useful.

Don’t forget to bring many snacks as well as a bottle of water since you will possibly be at a good distance from a restaurant for many hours, depending on which runway is in use. The same goes for additional batteries and memory cards for the camera.

Don’t forget the scanner, the cell phone (to call a taxi driver or get access to the arrivals and departures information) and all the photo equipment needed, as well as an abnormally high number of clothing layers necessary in case of winter photography: eight hours almost immobile outside in February calls for an appropriate preparation if you want to appreciate your experience. If you economize on clothing, it is certain that you will have to shorten your photography session.

I chose February for its very interesting light and not for its temperature! Most of the shots in this article were taken in only one day at the Toronto airport, between 10h30am and 18h30.

American Airlines MD-82 N482AA final 05 Toronto 2016
American Airlines MD-82 N482AA final 05 Toronto 2016

From the hotel to the airport

If you chose to stay at a downtown hotel in Toronto, the best way to get to the Toronto international airport is to use the UP Express train, from the Union Station on Front Street. Its use is very simple and departures are made every fifteen minutes. In February 2016, the cost was CDN $44.00 for a return trip to the airport, while a taxi ride cost $130.00.

UP Express Toronto 2016
UP Express Toronto 2016

The UP Express ride only takes 25 minutes and the train stops at Terminal 1.

It is preferable to avoid using your car around the Toronto international airport since some secondary roads are private and no stopping is allowed. You will take more time to look for police than to enjoy your plane spotting photography session.

Once you are at Terminal 1

Once you exit the UP Express at Terminal 1, get your scanner and monitor the ATIS frequency (120.825) to get the latest information on the runways in use for take offs and landings. For my photo session, the ATIS announced that runway 05 and 06L were in use, both for arrivals and departures. I took a taxi, showed the map with secondary roads to the driver and within few minutes I was where I needed to be and started the photo session.

Air Transat Airbus A-330 C-GTSN Toronto 2016
Air Transat Airbus A-330 C-GTSN Toronto 2016

A preliminary internet search allowed to discover that heavies mostly arrive from Europe during the afternoon et that runway 05/23 is favored for Emirates Airline Airbus A-380 arrival. I thus decided to position myself near runway 05 instead of 06L.

There are two or three quite isolated spots around the airport that provide interesting point of views for aircraft photos but that can present security problems for a photographer working alone with expensive equipment. Experienced plane spotters suggest that you should be accompanied by friends if you decide to opt for those spots (see the “plane spotting” internet sites suggested at the beginning of this article).

Emirates A-380 final for Toronto (CYYZ)
Emirates A-380 final for Toronto (CYYZ)
Emirates A-380 on final for Toronto (CYYZ) 2016
Emirates A-380 on final for Toronto (CYYZ) 2016
Emirates A-380 on final 05 for Toronto (CYYZ) 2016
Emirates A-380 on final 05 for Toronto (CYYZ) 2016

Technical advices

For precise photos of aircrafts in movement, I use the following parameters with my Canon 5D MKII camera:

1. Only the central AF Point of the auto focus system is selected and not the surrounding ones in order to avoid that the camera sets the focus on other objects than what I desire (trees, ILS structure, buildings).

2. The AI Servo setting is more efficient than the AI Focus or One Shot. The aircraft will be followed precisely.

3. If I want to include surrounding objects in the photo, I adjust the aperture to 7.1 or 8, instead of 11 or 13. I thus avoid increasing the ISO too much, which would affect the picture’s quality if it has to be enlarged with Photoshop.

Westjet Boeing 737-8CT C-GWSV Disneyland Livery in Toronto 2016
Westjet Boeing 737-8CT C-GWSV Disneyland Livery in Toronto 2016

4. To take pictures of an approaching propeller powered aircraft, a speed adjusted to 1/125 is generally adequate. You must pivot according to the aircraft movement so that it looks like it is immobile in your viewfinder. The picture is easier to take when the aircraft is farther away but becomes more of a challenge when it gets closer and flies by you since you must constantly change your pivoting speed.

Porter Q-400 C-GLQD on final for Toronto Billy Bishop airport (CYTZ) 2016
Porter Q-400 C-GLQD on final for Toronto Billy Bishop airport (CYTZ) 2016
Air Canada DHC-8-102 C-FGQK Toronto 2016
Air Canada DHC-8-102 C-FGQK Toronto 2016

5. A shutter speed that is too high will immobilize the propeller of an aircraft and make it look like the engine is not working, which will take away realism.

6. Throughout the day, position yourself so as to have the sun behind you (if there is any sun!), unless you are looking for special effects.

Global 5000 GL5T C-GJET in Toronto 2016
Global 5000 GL5T C-GJET in Toronto 2016

7. A very high quality lens, like the Canon 50mm 1.4, allows for beautiful pictures during the evening since there is no compromise on ISO, as the lens does not need much light. The grain size stays relatively small.

Air Canada Boeing 777 final 05 Toronto 2016
Air Canada Boeing 777 final 05 Toronto 2016

8. I use a very low ISO if the photo includes an interesting but far away aircraft, in order to be able to crop the picture with Photoshop. Since I cannot compromise on the speed to avoid a blurred picture, it becomes obvious that it is the aperture that pays the price.

Air Canada Airbus A-330 final 06L Toronto 2016
Air Canada Airbus A-330 final 06L Toronto 2016

9. If the situation allows it, add visual references other than clouds to get a bit more variety in your aircraft photo collection.

Air Canada Boeing 777 final runway 05 Toronto 2016
Air Canada Boeing 777 final runway 05 Toronto 2016

10. Try a black and white photo if the cloud formation is particularly interesting.

C-GQBG CL-415 and cirrus clouds on a black and white picture
C-GQBG CL-415 and cirrus clouds on a black and white picture

11. RAW+JPEG files allow for important adjustments when necessary. A JPEG only photo gives you little leeway when you want to correct mistakes or during problematic lighting conditions.

12. Variable sky conditions and constant direction winds are preferable for your photo session since the runway in use will not be changed in the afternoon and your pictures will benefit from different light intensity and cloud formations.

13. If you want to take the aircraft in relation to the ILS poles and you are looking for a symmetrical photo, just move few inches to the right or left while the aircraft is approaching or going away from you. You will also want to avoid that the horizontal poles of the ILS cut the plane and make it difficult to see.

Westjet Boeing 737-800 final 05 Toronto 2016
Westjet Boeing 737-800 final 05 Toronto 2016

14. Have fun experimenting, like taking a shot just above your head while including other objects for added interest.

On the ILS 05 for Toronto 2016
On the ILS 05 for Toronto 2016

15. Instead of always showing the whole aircraft, try a close-up view.

Air Canada Boeing 787-9 C-FNOI in Toronto 2016
Air Canada Boeing 787-9 C-FNOI in Toronto 2016

16. The close-up view might be such that even passengers of an aircraft on final will look at you while you immortalize them.

United Express on final at the Quebec Jean-Lesage international airport.
United Express on final at the Quebec Jean-Lesage international airport.

17. Chances are that you will meet other enthusiast plane spotters in the same area as yours since they also prepared themselves for a successful photo session.

Westjet Boeing 737-800 C-FYPB in Toronto 2016
Westjet Boeing 737-800 C-FYPB in Toronto 2016

18. Since you are in Toronto, head to Toronto Harbour when you are back downtown. You will witness the air traffic surrounding the Toronto Billy Bishop airport (CYTZ), formerly known as Toronto Island, and possibly take some original shots.

Porter Q-400 C-GLQM and C-GLQB at Toronto CYTZ 2016
Porter Q-400 C-GLQM and C-GLQB at Toronto CYTZ 2016

19. This is the photo equipment used for my Toronto airport plane spotting session: Canon 5D MKII camera and the following Canon lenses: EF 50mm f/1.4 USM, EF 16-35mm f/2.8L II USM, EF 24-70mm f/2.8L USM, EF 70-200mm f/2.8L IS II USM. No polarizer was used that day since I wanted to increase my margin of manoeuver with fast moving aircrafts under the February low intensity light.

Air Canada Rouge Boeing 767-300ER final 05 at Toronto 2016
Air Canada Rouge Boeing 767-300ER final 05 at Toronto 2016
American Eagle CRJ-701ER N523AE Toronto 2016
American Eagle CRJ-701ER N523AE Toronto 2016

Aviation photography requires much planning for successful photos. But all your efforts will rapidly bear fruits once you are on site and you will not see time pass! Have a great plane spotting session and give me some news of your experience if you can!

Air Canada Boeing 767-375 (ER) C-FCAB in Toronto 2016
Air Canada Boeing 767-375 (ER) C-FCAB in Toronto 2016

You can have access to other aircraft photos taken at Toronto through this link on my site:
photo galleries/aviation only

For other articles on aviation and photography, click on the following link: Aviation photography

Categories
Real life stories as a flight service specialist (FSS): Inukjuak FSS

Raisins and blueberries in Inukjuak

(Precedent story: The cockpit of a KLM Boeing 747 during a night flight over the Atlantic)

Around 1982, during the months when there was an on-the-spot cook preparing the meals in Inukjuak, for Transport Canada and Environment Canada employees,  we had it easy because everything was ready when meal time came. It remains that the desserts would have benefited from a little variety. Those were prepared with either grapes or blueberries, week after week, month after month.

Carrots and raisins muffins
Carrots and raisins muffins
Blueberries and lemon muffins
Blueberries and lemon muffins

We thus had the choice between raisin cakes, raisin pies, raisin puddings, raisin muffins and raisin cookies. When there was no more possibility of ingesting additional raisins, it was now time for blueberries: blueberry cakes, blueberry pies, blueberry puddings and blueberry muffins. However, to add some variety in the menu, there were no blueberry cookies. I was unable to eat raisins and blueberries for a long time following this monthly overdose of the same ingredients.

The cook not being particularly patient, I thought of making him laugh a little by asking him to participate in a trick where the victim would be a new Transport Canada flight service specialist (FSS) employee who had just arrived in Inukjuak in early afternoon. The latter had not taken any meal yet in the staff house’s kitchen. I knew that the dinner was served at 5 pm and that it was necessary to get organized to be on time. I thus told the cook that I would voluntarily arrive five minutes late with the new FSS. That would allow the cook to act as if he was extremely upset. I knew he would be convincing.

Dinner time came. It was 5 PM but training of the new flight service specialist was voluntarily extended five minutes. Then, feigning a surprise, we told him it was necessary to rush towards the staff house, as we feared the cook would be out of his mind. From the corridor that lead to the kitchen, we could hear cauldrons being smashed on the counter while the cook was shouting and complaining that new employees thought they were kings and lacked respect towards the kitchen staff.

The newcomer told me that he was not really hungry. Apparently, he was not anxious to face the cook’s anger. The situation got worse when I nevertheless incited him to go in the kitchen and try to arrange things with the cook. Seeing the new guy, the cook doubled his efforts, red with anger. Then suddenly, all the employees in the kitchen burst with laughter and the cook wished a warm welcome to the new FSS, thanking him for having given him a chance to relax a little.

(Next story: ice and ships)

For more real life stories of a FSS in Inukjuak, click on the following link: Flight service specialist (FSS) in Inukjuak

Categories
Real life stories as a flight service specialist (FSS): Inukjuak FSS

The UFO invented in Inukjuak in 1983.

(Precedent story: assertions concerning the massacre of sled dogs during the fifties and sixties)

An Environnement Canada employee is launching a weather balloon in Inukjuak in 1983
An Environnement Canada employee is launching a weather balloon in Inukjuak in 1983

When I was working as a Transport Canada flight service specialist (FSS) in Inukjuak (CYPH) (Nunavik) in 1983, I witnessed the creation of a most improbable UFO. According to its duties, the Environment Canada staff at work in the upper air station had to launch, twice a day, a free-rising balloon which could go up to approximately 70,000 feet. These hydrogen filled balloons were pulling a radiosonde which was transmitting data such as wind speed and temperature at all altitudes.

One day, an observer attached a small battery on the probe as well as five battery fed bulbs. The balloon rate of ascent was corrected to take into account the additional weight of the new equipment. Finally, at darkness, the whole installation was launched. The only thing an observer on the ground could see in the sky was five lights moving quickly together while maintaining the same spacing. The speed and height of the unknown formation were impossible to determine since there was no ground reference.

Observed from the ground, this UFO could be either at 100 feet or at a very high altitude. The object was totally silent and seemed to be moving like nobody’s business. A UFO is now identified, decades later.

(Next story: a kitchen used as a navigational aid)

For more real life stories of a FSS in Inukjuak, click on the following link: Flight service specialist (FSS) in Inukjuak

Categories
Real life stories as a flight service specialist (FSS): Inukjuak FSS

Allegations about the massacre of sled dogs during the fifties and sixties.

(Precedent story: acquisition of an Inuit sculpture in Inukjuak in 1982)

Canadian eskimo dogs in front of a house in Inukjuak in 1983
Canadian eskimo dogs in front of a house in Inukjuak in 1983

When I was working in Inukjuak (CYPH) in Northern Quebec as a flight service specialist (FSS) for Transport Canada, in 1982-1983, I liked walking along the Hudson Bay coast. One day, I got for company a big Canadian eskimo dog belonging to an Environment Canada employee. The dog had found a way to free itself from its leash and I took advantage of his company to explore the coast.

It was not and still isn’t frequent to witness unattended dogs on a territory inhabited by Inuits. During summer, the latter normally carry the dogs on nearby isolated islands along the Hudson Bay and Ungava coasts. Naturally, the Inuits come back at regular intervals to feed them. This was still going on in 2013 as it serves multiple useful purposes. According to an Inukjuak Inuit with whom I was discussing recently, the island allows the dogs some freedom of movement since they don’t need to be tied all day long to a short rope. Also, the dogs are more comfortable on the islands since there is far less mosquitoes.

In 1982, I heard rumors according to the fact that dogs left free might be brought down, but I did not witness such a thing. Local policy was such that stray dogs would not be tolerated because they presented a threat for the population. Of all that has been said concerning dogs that were brought down for the most diverse reasons, the recurrent story is the allegation of massacres of Eskimo dogs during the fifties and sixties. The documentation found in this respect states that about one thousand dogs were brought down during those two decades, most pointlessly, in the various villages along Hudson Bay, Ungava Bay and Davis Strait.

An interim report about the investigation on this subject was handed in 2009 to the Makivik Corporation and to the Government of Quebec by the retired judge Jean-Jacques Croteau from the Quebec Superior Court. We learn of this report that the RCMP as much as Sûreté du Québec police forces had participated in the elimination of sled dogs during those years, by interpreting in a personal and fairly restrictive way a law dating from 1941 and dealing with “The Agricultural Abuses Act“. When it was created, this text of law aimed at creating a system of non-responsibility for a person who would shoot down a stray dog according to specific conditions stipulated in the text of law. Reference was made here to actions taken against stray dogs attacking sheeps and farm animals.

A Canadian eskimo dog (Jordan) in Inukjuak in 1983
A Canadian eskimo dog (Jordan) in Inukjuak in 1983

The police quickly made excessive use of this section of the law to apply it on a territory which was not targeted by the law. I can make a mistake, but I believe that nobody ever observed an Inuit sheep farmer on a farm in the Arctic. The most important events occurred after the RCMP gave back the responsibility of the territory to the Sûreté du Québec. That police force showed a complete misunderstanding of the Inuit culture. According to the proofs presented in the report, policemen arrived in a village without warning and killed stray dogs, chasing them even under houses, without having taken care of verifying if the dog was sick or dangerous. We find in the report the testimony of two Kangiqsujuaq Inuits asserting having seen two policemen arriving by seaplane, and without saying a word to whoever it is, begin to chase stray dogs through the village. Thirty two animals were eliminated and the policemen left the village without giving explanations.

The report states that the Northern Quebec Inuits were never consulted as to the impact of the law on “The Agricultural Abuses Act”, a totally inappropriate law for them, not taking into account their ancestral rights. The Inuits depended completely on dogs for transportation, to go hunting and fishing. We can read the following passage, in the last sections of the report: “after 1960, the actions and the behavior of the police force went too far. Nothing was to be understood. The officers demonstrated a total lack of consciousness with regard to the fundamental rights of the Inuits, their culture and the importance of dogs for their subsistence. The behavior of the officers, which could not be ignored by the provincial and federal civil administrations, had a damaging effect on seventy-five dog owners and their family, compromising their capacity to meet their needs in food “. No help was offered by the authorities to compensate for the loss of dogs.

The judge finally noted that he had no other choice than to declare that Canada and Quebec did not respect their fiduciary obligations towards the Inuits. I imagine that monetary compensations have since been offered, unless this report was only the first step in the process aimed at establishing the responsibilities and some future compensation.

(Next story: the UFO invented in Inukjuak in 1983)

For more real life stories of a FSS in Inukjuak, click on the following link: Flight service specialist (FSS) in Inukjuak

Categories
Real life stories as a flight service specialist (FSS): Inukjuak FSS

Acquisition of an Inuit sculpture in Inukjuak in 1982

(Previous story: Inukjuak: last hope for a Twin Otter low on fuel)

Once in a while, an Inuit carver would visit the Transport Canada flight service station (FSS) and surrounding Environment Canada buildings in Inukjuak, in the Nunavik, to offer one of his new creation. The main problem is that these visits were forbidden by the workers co-op. If the carver was caught selling a sculpture without going through the co-op, he lost his right to sell his regular production to the cooperative. But the temptations to bypass regulations were strong.

First, some sculptors considered that they were not receiving enough money from the cooperative for their work. Most knew the real sale price of their carvings once those ones were displayed in specialized stores down South. Secondly, there were sculptors who suffered from alcoholism. They could not buy alcohol in Inukjuak but knew that Whites had generally a small quantity of it in their ownership. Some sculptors were taking a chance and visit Whites at their working place during night time.

Some Whites took advantage of that alcohol addiction and acquired beautiful sculptures in exchange of a bottle. There was and there are always several problems associated with such an attitude, the most important being that the Whites help perpetuate the difficulties lived by native communities with regard to alcohol. The devastation caused by alcohol and drugs in certain villages of the Northern Canada is well documented and this is why several locations have put in place a strict ban on alcohol consumption. No store can sell it.

But an inhabitant of a northern village knows that Whites have some alcohol in their possession. People sometimes came back home after a day of work only to notice that the house had been visited by an intruder. Nothing had been stolen except the alcohol, although other valuables were immediately available to the thief. The problem is that violent acts are mostly committed when alcohol and/or drugs are involved. It is thus important to avoid being an indirect actor of a potential drama.

The sculptor being the author of his creation, he has the right to take a risk and try to get a better price for his work by avoiding the workers co-op. However, it is risky: his attempts are going to bring him more money until he is caught.

A rare opportunity to buy a sculpture directly from the carver was given to me one winter evening while I was working at the flight service station. A sculptor showed up with his carving which he deposited on the briefing counter. It seemed to be large-sized piece, at least according to the size of the packaging. It was protected by a simple blanket and was about 18 inches high by 12 inches wide.

He told me that he wanted spirits for his work and nothing else. I replied that I did not have spirits in my possession. He then asked for beer. I had some beer in my room, but refused to tell him. I offered him money which he clearly refused: he only wanted alcohol at the approach of the weekend. I refused to modify my line of conduct and, a few seconds later, saw the sculptor disappear with his creation, confident that he would quickly find a more flexible customer.

(Next story: assertions concerning the massacre of dogs of sleds during years ‘ 50 and ‘ 60)

For more real life stories of a FSS in Inukjuak, click on the following link: Flight service specialist (FSS) in Inukjuak

Categories
Real life stories as a flight service specialist (FSS): Inukjuak FSS

Emergency clean-up in Inukjuak

(Precedent story: the Inuit who wanted to shoot Whites with a .303 caliber rifle)

In a Northern Quebec Inuit village, in the early ` 80s, there was still a fair amount of homes that were not equipped with toilets as we know them today. The occupants of these properties had to relieve themselves by sitting on a bucket covered with a garbage bag that people called “Honey Bag “. Fortunately for Environment Canada and Transport Canada flight service specialists (FSS)working in Inukjuak (CYPH), sanitary facilities were exactly like what could be found in southern cities and it was not necessary to use makeshift means.

The fact remains that a White male was hired as director of a local public institution and lived with his family in a house equipped with this type of “Honey Bag ” facility. On a beautiful Saturday, he and his wife were receiving guests for dinner and they were taking care of the final details. The wife had asked her husband, few days earlier, to take the “Honey Bag” out of the house and put a new bag on the toilet.

The man had neglected his task and the bag had gained volume and weight. But it was now Saturday, so he could no longer procrastinate. He grabbed the bag, closed it and crossed the living room heading toward the door. At the moment he was crossing the living room, the bag broke and all of its content spread on the carpet.

It was reported to us that there was an emergency clean-up throughout the afternoon to try to correct the situation. There was no way of knowing if the guests were able to enjoy the subtle aromas of the good wine served with the dinner…

(Next story: Inukjuak: last hope for a Twin Otter short on fuel)

For more real life stories of a FSS in Inukjuak, click on the following link: Flight service specialist (FSS) in Inukjuak

Categories
Real life stories as a flight service specialist (FSS): Inukjuak FSS

The Inuit who wanted to shoot Whites with a .303 caliber rifle

(Precedent story: the long awaited aircraft)

This is where we worked and lived in Inukjuak in 1982. One of the buildings holds the Transport Canada flight service station.
This is where we worked and lived in Inukjuak in 1982. One of the buildings holds the Transport Canada flight service station.

Note: It is only an out of the ordinary true life story. Normal relations between Whites and Inuit are entirely peaceful. Besides, we all know of situations in the southern cities where whites have tried to shoot people. The following story therefore presents an unusual and rare case.

In a Northern Quebec village named Inukjuak,in 1982-1983, the buildings layout was simple. On top of a nearby hill was the whole village, populated overwhelmingly by Inuit. Down the hill, near the airstrip and Hudson Bay, were the few buildings where Environment Canada employees and Transport Canada flight services specialists (FSS) could be found. There were only Whites living and working in this area.

One evening during winter` 82 -` 83, someone knocked on the door and entered immediately without waiting for an answer. It was the auxiliary police officer. He was an unarmed young man who occasionally helped the unique village policeman. He told us that the policeman was absent from the village and that he must fend for himself. He urged us: “Lock your doors and turn off the lights, do not go out unless it is essential, as there is one Inuit armed with .303 caliber rifle who wants to shoot white people.

It was, of course, a complete surprise for everyone. It was easy to deduce that the shooter looking for Whites would choose the easiest solution and head towards our buildings to shoot somebody at random. Not wanting to be a sitting duck, I went to my room and grabbed a locked suitcase that had been sleeping for months on a shelf. I took out a Remington Classic 700 BDL Bolt Action and loaded the magazine.

We established a plan, with the other two persons in the house. Two of us would have to get out and head toward the flight service station, where there was an unarmed FSS female employee working alone. Chances were that she was not aware of what was going on. One of us would bring her back home and the other one would then complete her night shift at her place, since the station could not be left unattended.

While we would be gone, there would be one person left in the house with a gun to protect himself if necessary. This employee had just arrived in Inukjuak. I still remember his reaction when we were getting ready to leave. I can hear him say: “But what is this crazy place?

We closed the outdoor floodlights and headed to the flight service station with our weapons. Walking in the dark, crouched like soldiers during wartime, we arrived at the Transport Canada building where we found the employee occupied at her normal duties, completely ignoring the possible presence of a nearby shooter. I took her place to complete the night shift while she returned home accompanied by an armed employee.

Once alone in the operating room, I shut the lights while keeping a small lamp to illuminate the console radio frequencies. I lay the rifle flat on a counter, the lock removed for faster use if needed. The radio console was located opposite a large window: it left us totally exposed to anyone who would decide to shoot through it. I therefore had to stay away from the normal working position, except when responding to radio calls, until we received fresh news about the shooter.

Twin Otter inbound for Inukjuak on a very windy day in 1982.
Twin Otter inbound for Inukjuak on a very windy day in 1982.

The improvised night shift ended without incident in the station, but I learned that multiple shots were fired at a vehicle traveling near our facilities. Projectiles pierced doors, but luckily they did not hit the vehicle occupants. Within hours of the event, a tactical response team of the Sûreté du Québec arrived in Inukjuak and controlled the shooter.

Even if this story took place decades ago, I still remember very well the atmosphere on that evening. When untrained civilians must load firearms to potentially use them against another human, it cannot be forgotten.

(Next story: emergency clean-up)

For more real life stories of a FSS in Inukjuak, click on the following link: Flight service specialist (FSS) in Inukjuak

Categories
Real life stories: flight service and Transport Canada Training Institute

The flight service specialist training at the Transport Canada Training Institute in Cornwall, Ontario.

(Precedent story: the flight instructor license)

View of a small portion of the Transport Canada Training Institute in Cornwall, Ontario, in 1982
View of a small portion of the Transport Canada Training Institute in Cornwall, Ontario, in 1982

In the early 80s, the oil crisis forces airlines to greatly limit hiring. This was not the case during our pilot training course but becomes a reality when applying for a job a year later.

However, on the government side, the situation is quite different. The air traffic services branch of Transport Canada is looking for new employees to replace staff approaching retirement age. The only option immediately accessible to me is to apply as a flight service specialist (FSS). I have only a rough idea of what are the responsibilities, nothing more. But the pay and advantages are far better than what is otherwise available to a new flight instructor. It is time to send in an application.

For the Province of Quebec, two written examinations totally unrelated with aviation are held at the University of Quebec in Montreal. There are 1500 candidates (5 sessions of 300 applicants) who attempt these tests during the two days allotted for the first phase of the selection process. In the following weeks and months, those who have succeeded in the written tests must then undergo anything from personal interviews to language tests, medical examinations and security clearances.

We are now three candidates from Quebec heading towards the Transport Canada Training Institute in Cornwall. There will be thirty-five hours of theoretical and practical course per week, over a six months period. The pressure will be continuous and desired in order to eliminate candidates who may not react well to stress.

We will be paid to study. A candidate is guaranteed with a posting upon completion of training, providing he manages to obtain 80% and above on the written and practical evaluations. Because this 82-01 course is not dedicated to Quebecers only, it cannot be offered in French. So it is going to be in English only, and will include twenty-four students from almost all Canadian provinces.

The Transport Canada Training Institute in Cornwall is nothing short of exceptional for those who have decided to study and succeed.

In order to help the student to deal with the weekly thirty-five hours of courses and examinations, the school provides interesting amenities.Each student has a private room with daily maid service. The cafeteria offers a good choice of meals. Calories can be burned at the pool, gym, weight room, on the tennis court or on the baseball field. A snack bar remains open for late-night cravings. A bank teller is made available to students, as well as a hairdressing salon, a bar, arcade games, pool tables, etc.

1982 Cornwall TCTI Pool
1982 Cornwall TCTI Pool
Transport Canada Training Institute weight room. Cornwall, Ontario 1982
Transport Canada Training Institute weight room. Cornwall, Ontario 1982
1982 Cornwall TCTI combat room
1982 Cornwall TCTI combat room
1982 TCTI, Cornwall. Students from the FSS 82-01 group are experimenting a new way to improve scoring at basketball.
1982 TCTI, Cornwall. Students from the FSS 82-01 group are experimenting a new way to improve scoring at basketball.
1982 Cornwall TCTI games
1982 Cornwall TCTI games

So that we understand what lies ahead, we are told that there are traditionally many students in each class who will not keep pace and will be sent home, despite their efforts. For a francophone who wasn’t using a second language on a daily basis , it is clear that integrating new theory presented in English for seven and a half hours every day, five days a week, becomes demanding. I compensate for the times when my attention decreases by studying in the evening.

There is a library in the school as well as multiples rooms for flight simulators designed for every career considered by the students.

1982 Cornwall TCTI Flight Simulation Room
1982 Cornwall TCTI Flight Simulation Room
1982 TCTI Cornwall. Environment Canada upper air building.
1982 TCTI Cornwall. Environment Canada upper air building.
1982 TCTI Cornwall Stevenson screens
1982 TCTI Cornwall Stevenson screens

In the courtyard, there is a peacock and other small animals and a water source flows into a very well planned landscape.

1982 Cornwall TCTI courtyard
1982 Cornwall TCTI courtyard

The amenities are simply stunning. The message is clear: “Transport Canada only ask you to study and succeed, it will take care of the rest.”

1982 Cornwall TCTI corridors to classrooms
1982 Cornwall TCTI corridors to classrooms

Finally, the moment we were all waiting for as arrived. Students who managed to get through the course celebrate their graduation.

Assignments are distributed. Those who will be working in isolated postings, in northern Quebec, are well aware that the schedule does not include holidays. The FSS will be on duty every day. The new employee will be compensated for overtime and a more expensive cost of life. He will also benefit from subsidized rents.

My departure is planned shortly for Inukjuak (CYPH), along the east coast of Hudson Bay in the Nunavik. Life will soon change radically.

(Next story: enroute to the first posting: Inukjuak)