(Precedent story: night landing on an ice rink)
The Commercial Pilot License
A few months later, I got my commercial pilot license. It was now time, as for all pilots, to accumulate flying hours in order to gain experience as captain.
I chose to accumulate hours by making short cross-country trips and offering first flights to people of all ages. The evenings were particularly popular because there was little convection and most passengers appreciated a smooth ride for their first flight in a small aircraft.
A Tire Bursts on Landing.
Despite my best intentions, there has still been an occasion where I had to perform an unusual landing. It was during a busy time for air traffic control. Many aircrafts were in the St-Jean-sur-Richelieu (CYJN) airport’s circuit pattern and the controller asked me if I could make a short landing with my Grumman Cheetah (AA-5A). He was counting on a minimal roll after the landing so that the aircraft could exit the runway as soon as possible.
All pilots know how to make a short landing. This is part of the basic training and I accepted this restriction. This can, however, be complicated by the fact that sometimes we had to fly an aircraft with particularly worn out tires. I remember (and I should not be the only one) having had to use an aircraft on which we could see the rope under what was left of the rubber sole. School aircrafts are generally safe. You just don’t want to be the one using the plane the day before the tires have to be changed…
So I began the approach toward runway 29 on a particularly hot summer day. Touchdown was smooth. I applied the brakes without blocking the wheels, while pulling on the control column at the same time that the flaps were returning to their initial position. A pilot does not block the wheels when breaking as the friction decreases and the length necessary to stop the aircraft increases.
At the same time, blocking the wheels increases the risk of loss of control of the aircraft. With these manoeuvers, my aircraft was supposed to stop quickly. However, a few seconds after landing, it started to vibrate and move to the right. I had no other choice but to apply a lot of pressure on the left brake and use full deflection on the left rudder trying to keep the aircraft centered on the runway. Nevertheless, the aircraft slowly headed toward the right side of the runway while slowing down. The landing ended with the left wheel on the runway and the right wheel in the grass.
During the last few seconds, it became obvious that I was dealing with a flat tire. The passengers were not too bothered by the incident because they only started to realize what was happening when we were almost immobilized on the grass. The tire was completely twisted but still on the wheel. Equipment failure is something a pilot knows he will have to deal with from time to time. So considering that it was part of the job, I continued to accumulate flying hours during the following weeks and months.
(Next story: unexpected thunderstorm cells)
For other real life stories as a pilot, click on the following link: Real life stories as a pilot