Categories
Flight Simulation

Short Landings in Flight Simulation with MSFS 2020

On approach for Île d'Orléans.
On approach for Île d’Orléans.

Today’s flight consists of two virtual short landings using the MSFS 2020 flight simulator (or as some call it, FS2020). We will be landing on Île d’Orléans and on the Battlefields Park.

First of all, I admit that the Cessna 170B’s windows are dirty. For realism, the designer Carenado left a little dirt here and there to show the wear and tear of this very old aircraft.

The picture above shows Île d’Orléans as seen from the Cessna. Since there is no landing strip but a golf club in the area, we will use the open fairways to land the aircraft. If there is a golfer on the course, I will open the window and yell, as is customary, “Fore!” (Falling Object Returning to Earth).

On final for Île d'Orléans
On final for Île d’Orléans

We are established on final for the small portion of open ground ahead. With 40 degrees of flaps, the stall speed is particularly low and the landing should not be too difficult.

On Île d'Orléans ready for take-off.
On Île d’Orléans ready for take-off.

Although the available strip was not very wide, it was long enough for the landing, the taxiing and the maneuvering to turn the aircraft 180 degrees for its take-off to Quebec City.

Airborne from Île d'Orléans with a Cessna 170B
Airborne from Île d’Orléans with a Cessna 170B

Back in the air, direction Quebec City. The take-off on soft ground requires about 20 degrees of flaps.

Enroute towards Quebec City.
Enroute towards Quebec City.

Quebec City is in sight. In the Cessna C-170B I flew in 1981 across Canada from St-Jean-sur-Richelieu to Edmonton, Alberta, there was no modern navigation aid installed on board as in the photo above, where the GPS helps the pilot find his way. The flight was flown using 14 VFR charts and nothing more. (If you are interested, click to read more about real-life flying stories on my blog).

Hôtel le Concorde and its revolving restaurant, visible on the right.
Hôtel le Concorde and its revolving restaurant, visible on the right.

We are now above the Plains of Abraham. On the picture above, on the right, you can see the Hotel le Concorde and its revolving restaurant. We will possibly disturb the quiet atmosphere of the meal as we fly by…

The MNBAQ and the Battlefields Park are in sight.
The MNBAQ and the Battlefields Park are in sight.

Above, straight ahead, the gray buildings represent a portion of the Musée National des Beaux-Arts de Québec (MNBAQ). A little further on is the open area of the Battlefields Park. In 1928, Lindbergh landed on that field to bring badly needed medicine for his friend Floyd Bennett. Can we normally land on the Battlefields Park, in the heart of Quebec City? Of course not. But that’s the beauty of a flight simulation; you can do whatever you want!

Cessna 170B on the Battlefields Park in Québec City.
Cessna 170B on the Battlefields Park in Québec City.

Once landed, the aircraft is allowed to decelerate gradually and then turned 180 degrees for the next takeoff. When winds are light, there is no need to worry about the direction of the takeoff.

Aerial view of Battlefield Parks with the Cessna 170B under MSFS 2020.
Aerial view of Battlefield Parks with the Cessna 170B under MSFS 2020.

Above, an aerial view of the Battlefields Park, with the virtual Cessna C-170B ready to take off again.

Partial view of Quebec City in flight simulation with MSFS 2020
Partial view of Quebec City in flight simulation with MSFS 2020

One last picture, this time with some additional buildings. The realism of the virtual scene with FS2020 is amazing!

I hope you enjoyed these two short flights. Whether you use the short landing technique for the Battlefields Park is really up to you, as there is enough space for a normal landing. But it is good to practice landing in the shortest distance possible. You never know when your engine will quit!

You can click on the following link for other challenging virtual flights   on my blog.

Categories
Photography Photos of Quebec

Quebec City’s MNBAQ in Winter.

The Turner Exhibition at the MNBAQ in Quebec City in 2021.
The Turner Exhibition at the MNBAQ in Quebec City in 2021.

Before winter 2021 officially ends, here are some photos taken around the MNBAQ (Musée National des Beaux-Arts du Québec) while there is still snow on the ground and on tree branches. In the spring of 2021, the Museum hosted the exhibition by British painter J.M.W. Turner.

A section of the Musée National des Beaux-Arts du Québec (MNBAQ) in winter.
A section of the Musée National des Beaux-Arts du Québec (MNBAQ) in winter.

The architectural design of the MNBAQ, in combination with the contrast between the blue and yellow tones, caught my attention. The scene is partially framed by two trees. The passerby in the center adds a touch of humanity.

The "blue hour", that special moment of the day, in a park near the MNBAQ.
The “blue hour”, that special moment of the day, in a park near the MNBAQ.

The photo above was taken during the “blue hour“, near the MNBAQ. The citizens have deserted the park and are back inside, as shown here with the building in the background, with almost all its floors now lighted.

I considered it important to include the nice trees around the museum in all three shots.

Click on the link for other pictures of Québec City in winter on my blog.

Categories
Photos of Canada Photos of Quebec

The new Pierre Lassonde pavilion of the Musée National des Beaux-Arts du Québec

Official opening of the Pierre Lassonde Pavilion, which is part of the Musée National des Beaux-Arts de Québec, seen from Grande Allée on June 24th 2016
Official opening of the Pierre Lassonde Pavilion, which is part of the Musée National des Beaux-Arts de Québec, seen from Grande Allée on June 24th 2016
Pierre Lassonde Pavilion (Musée National des Beaux-Arts de Québec) intercommunication stairway on the day of official opening in June 2016
Pierre Lassonde Pavilion (Musée National des Beaux-Arts de Québec) intercommunication stairway on the day of official opening in June 2016

On June 24th 2016, during the National Holiday of Quebec, the new Pierre Lassonde pavilion of the Musée National des Beaux-Arts du Québec (MNBAQ) on Grande Allée in Quebec City was inaugurated. This pavilion, that has been expected for a very long time, will allow the Museum to expose art that had to be stored, up to now, due to lack of floor space. This new pavilion will double the exibition space.

Artwork exibited in the Pavillon Pierre Lassonde du MNABQ on June 24th 2016
Artwork exibited in the Pavillon Pierre Lassonde du MNABQ on June 24th 2016

Many political personalities were present, among them the Prime Minister of Canada Justin Trudeau and Quebec’s Prime Minister Philippe Couillard, as well as the MNBAQ director Line Ouellet. International actuality caught up with the Canadian Prime Minister during his presence in Quebec and he had to comment on United Kingdom’s exit from the European Union (Brexit) which was voted on the precedent day.

Part of a sculpture located outside of the Pierre Lassonde Pavilion at the Musée National des Beaux-Arts du Québec in 2016
Part of a sculpture located outside of the Pierre Lassonde Pavilion at the Musée National des Beaux-Arts du Québec in 2016
June 24th 2016 in the MNBAQ's Pierre Lassonde Pavilion
June 24th 2016 in the MNBAQ’s Pierre Lassonde Pavilion

The Pierre Lassonde pavilion architectural project, valued at about $103 millions, was the result of an international competition won by the American architectural firm OMA from New York. Fifteen thousand people were expected to show up for the inauguration. Instead, thirty thousand people visited the pavilion to get a glimpse of the creation directed by the architect Shohei Shigematsu.

Pierre Lassonde Pavilion's intercommunication stairway on June 24th 2016. Photo taken with a Canon 5DSR equipped with a 14mm 2.8L fixed lens.
Pierre Lassonde Pavilion’s intercommunication stairway on June 24th 2016. Photo taken with a Canon 5DSR equipped with a 14mm 2.8L fixed lens.
MNBAQ's Pierre Lassonde Pavilion's stairway on June 24th 2016
MNBAQ’s Pierre Lassonde Pavilion’s stairway on June 24th 2016

Lots of compromises to limit the expenses had to be made, like in all serious projects. Nonetheless, the pavilion is a success and I am eager to see what kind of atmosphere will be generated this coming winter when the light shines through the glass panels and colors the snow around the pavilion. This new building, with its original architecture and the light that emanates from it, already adds a new dynamic when night falls on Grande Allée.

MNBAQ's Pierre Lassonde Pavilion on the evening of official opening. Photo taken with a Canon 5DSR on June 24th 2016
MNBAQ’s Pierre Lassonde Pavilion on the evening of official opening. Photo taken with a Canon 5DSR on June 24th 2016
Intercommunication staircase in the Pierre Lassonde Pavilion at the MNBAQ on the day of official opening (June 24th 2016)
Intercommunication staircase in the Pierre Lassonde Pavilion at the MNBAQ on the day of official opening (June 24th 2016)

For those of you who are interested in photography, here are some details about the photographic equipment used for my photos : they were all taken with a DSLR Canon 5DSR camera. The Canon lenses that were used were : EF 14mm f/2.8L II USM, EF 50mm f/1.4 USM and telephoto lens EF 70-200 mm f/2.8L IS II USM. The use of a flash being forbidden inside the museum, I had to carefully adjust the ISO, speed and aperture settings, especially where the use of a tripod was not authorized. For those occasions, the EF 50 mm f/1.4 USM was of great help.

Visitors on the roof of the MNBAQ's Pierre Lassonde Pavilion on June 24th 2016
Visitors on the roof of the MNBAQ’s Pierre Lassonde Pavilion on June 24th 2016

For other photos on the province of Quebec and also Quebec City, click on the following links from my blog:

Province of Quebec Photos
Quebec City and Île d’Orléans in Autumn
Quebec City and Île d’Orléans in Winter
Quebec City and Île d’Orléans in Spring
Quebec City and Île d’Orléans in Summer