Arriving and departing floatplanes in Victoria Harbour must deal daily with ships that cross their path on landing and take-off. The staff on the Victoria Clipper is so used to this kind of traffic that it does not look in the direction of the incoming aircraft!
Click on the link for other pictures of British-Columbia on my blog.
The pictures below were taken in Vancouver and Victoria, in British Columbia. They were all taken with a Canon 5DSR full frame camera.
In the Vancouver harbour, several condo towers have been built in the last few years. Many condos in those towers can now be rented by travellers through Airbnb, thus entering in direct competition with the hotels located nearby. I was trying to use the water reflections in the harbor to show one of the towers when this seagull appeared in the viewfinder, adding a touch of life to the scenery.
Floatplanes of all types constantly maneuver in the Vancouver harbour. The two photos below show a Saltspring Air Turbo Otter as it is being helped to park. You can also see a row of Harbour Air Beavers (DHC-2) parked after a day of uninterrupted flights.
In the Willows Beach’s Park, in Victoria, I was able to photograph this Cooper’s Hawk using a Canon 70-200 f2.8L IS II USM telephoto lens. The full frame sensor 50 megapixels allowed for some serious cropping to bring the bird closer. The hawk clearly annoyed all the crows that considered themselves as the owners of the territory.
In the evening, the fishing boats come back to the Victoria Fisherman’s Wharf. Since I was standing on a moving platform, the use of a tripod would have been useless because of vibrations impossible to eliminate. The solution was to use a lens requiring little light, like the Canon EF 50mm 1.4 USM. By increasing the aperture and the ISO, the picture could be taken with a high enough shutter speed to avoid a blurred photo.
Click on the link for other pictures of British-Columbia on my blog.
The photo above portrays a Beaver floatplane belonging to Harbour Air. It is seen here a few minutes after its take-off from the Vancouver Harbour floatplane base in British Columbia. The picture was taken with a Canon 5DSR full-frame camera equipped with a Canon 70-200 f2.8L IS II USM telephoto lens.
The aircraft, quite small in the photo, could have been enlarged using the Canon 5DSR’ s 50 megapixel full-frame sensor. The image would still have been of excellent quality but I would have lost the effect I was initially looking for.
As opposed to what seems obvious at first sight, the scenery was not captured sitting in another plane but from the ground, while I was standing near the Harbour Air seaplane base. The morning’s constant precipitation saturated the air with moisture and helped create a low level cloud base.
An image editing software was then used to crop the scene. I used a non standard photo format to show the kind of flight the pilot was dealing with, between two cloud layers and with a mountain range on his right. It seems to me that a photographer does not have to feel obliged to follow an arbitrary format if the latter has a negative impact on the intended result.
Cliquez sur le lien pour d’autres photos d’avions sur mon blogue.
The picture above has been taken with a Canon 5DSR full-frame camera in the Port of Vancouver, in British Columbia, during summer 2016. Following a very busy day of take-offs and landings, everything is now peaceful. The Harbour Air Twin Otter floatplane C-GQKN and Turbo Otter floatplane C-FODH are now parked for the night.
Pictures taken at dusk or dawn benefit from a unique light. Nonetheless, taking pictures of aircrafts against the light, with the last sunrays still visible, requires a special attention with regards to blown out highlights.
When contrasts are too important, it is possible to correct the situation by taking several pictures with different exposures and merging them using an image editing software like Photomatix (HDR photography). This is done in a few minutes only. Nonetheless, with floatplane aircrafts that are still slightly moving even when tied for the night, there is an increased risk of a blurred picture. The best way to proceed is to use a ND grad filter and to place it exactly where the light is the strongest. Naturally, there will still be some blown out highlights.
This being said, you still have a good margin of manoeuver, since there is no problem in showing a limited amount of over-exposed highlights in the brighter part of the sunrays, as there is not much details to lose there anyway. While purists would argue otherwise and spend hours in front of their computer trying to correct everything, you are making the best of another day of photographic exploration.
If the picture was taken using RAW files (or RAW with JPEG), it is possible to improve the scene even more by correcting some aspects like the contrasts, the brightness, the colours, the saturation and ambient light, etc. This also requires very limited time in front of the computer once you understand the basic principles of an image editing software.
Click on the link for more aviation photos on my blog.
It looked like it would be an average day for a photography session at the Vancouver Harbour. The sky was quite ordinary, which means totally cloudless. But around noon, a new and more humid air mass made its way in British Columbia and rapidly the blue sky was replaced by clouds and precipitations. At the same time, the high intensity light that was prevailing around noon suddenly took more acceptable levels for photography.
Pilots of different bush floatplanes like the Twin Otter (DHC-6), Turbo Otter (DHC-3T) and Beaver (DHC-2) had to deal with the sudden weather deterioration in order to complete the daily planned flights. But one man’s loss is another man’s gain. For aviation photography, low clouds and light intensity meant that the pictures would be more interesting.
The photo above was taken with a Canon 5DSR full-frame DSLR camera equipped with a Canon 70-200 f2.8L IS II USM telephoto lens. In order to capture the moving propellers, I had to set a low shutter speed. The scene was then cropped to avoid visual distractions. The 50.6 megapixels full-frame sensor of the Canon 5DSR facilitates cropping when it is required.
In the foreground, there is a Harbour Air Twin Otter floatplane (C-GQKN) approaching to land in the Vancouver Harbour. In the background, far away and in the superior right corner of the photo, the pilot of a Turbo Otter floatplane also deals with worsening weather while ensuring that he maintains a visual contact with high ground obstacles surrounding the harbour.
Click on the following link for aviation photography on my blog.