In the « flight simulation » section, under « challenging virtual flights », you will soon find screen captures representing the DG-808S glider built by DG Flugzeugbau. The flight departed from the Parry Sound airport (CNK4) in Ontario. The scenery has been created by Vlad Maly, from ORBX.
The command CTRL+SHFT+Y will allow an aircraft to appear and a cable to be installed between the aircraft and the glider. It is more demanding to do gliding operations in the Parry Sound region because if the pilot gets far enough from the airport, he leaves behing many options to help him land easily in case of difficulties. There are not many fields or roads. There are mostly lakes and forests. The view is interesting, but you fly with the feeling that there is really no plan B. If the glider must go down, chances are it will find itself either in water or on the top of trees.
The DG-808S can reach a speed up to 146 kT and has a gliding ratio of 5o :1. It is a high performance glider. It can carry up to 343 pounds of water to be used as ballast. In real life, the pilot uses the necessary amount of water according to the prevailing weather conditions. If there are weak thermals, the glider will easily operate without water. If there are strong thermals, it carries the maximum amount of water in its wings to add sufficient weight.
The flight was made using CumulusX and FSX. On final for runway 35, you will have the opportunity to fly at low altitude over Robert’s Lake and admire all the small details created to make the scenery more realistic.
For more articles on flight simulation on my web site, click on the following link : Flight simulation
Good luck and have fun!