Categories
Photos of Quebec

Sea kayaking on Île d’Orléans

Sea kayaks at Saint-Laurent-de-l'Île d'Orléans 2023
Sea kayaks at Saint-Laurent-de-l’Île d’Orléans 2023

On Sunday, September 24, 2023, the company Quatre Natures   organized a certified level 1 sea kayaking course the St. Lawrence River, starting from Île d’Orléans. As registration was done well in advance, we had to be a bit lucky during the activity, as it would take place as much in good weather as in bad.

So, I take a chance. Fortunately, an incredible day awaits the six students: full sun and twenty degrees Celsius. How should we dress for the circumstances? We know that the human body temperature is 37 degrees Celsius. The kayaker adds up the water and air temperatures and compares the total to the temperature of the human body. With the river that day at 18 degrees and the air around 20 degrees, this gives a total of 38. As this figure is slightly higher than normal body temperature, we can wear normal clothing for water activities, rather than a wetsuit.

The morning is used to cover theory. No one sets foot in the water. The instructor discusses what the kayaker must have on board, the relative quality of different equipment, preparation, communications and radio frequencies, safety and hypothermia prevention, and so on.

Sea kayaking activity at l'île d'Orléans (photo Vadym Kravchenko)
Sea kayaking activity at l’île d’Orléans (photo Vadym Kravchenko)

After lunch, the kayaks are placed on the lawn and the vocabulary related to each part of the kayak is learned. The student then settles into the kayak and learns how to adjust the footbraces, hold the paddle, install the spray skirt, and so on. The boats are then brought to shore and kayaking begins.

First, we learn the basic maneuvers. How to embark and disembark, the trajectory the paddle should follow in the water depending on whether you want to go forward, backward or turn. We discuss the correct position of the body, arms and wrists on the paddle, and the importance of rotating the pelvis to force the paddle properly. We quickly realize the influence of side winds on the kayak, especially when it has no centerboard or rudder.

The river is considered level 2 for kayaking. The current is strong, and we have to deal with three-metre tides. The wind around the island is also stronger than in Quebec City. Level 1 kayakers are encouraged to seek out Level 1 locations to gain experience, and never to set off alone at this stage of their learning process.

During the exercises, you can see the container ships and the various pleasure boats offshore. The larger vessels generate waves that take between five and ten minutes to reach the shore. When these approach, the instructor warns novice kayakers to turn to face the wave, so as to limit the effects on the boat.

The container ship Hapag_Lloyd Quebec Express and the container ship MSC Paola are sailing around Île d'Orléans near Quebec City.
The container ship Hapag_Lloyd Quebec Express and the container ship MSC Paola are sailing around Île d’Orléans near Quebec City.
The BBC Manila carries wind turbine blades on the St.Lawrence Seaway near Quebec City.
The BBC Manila carries wind turbine blades on the St.Lawrence Seaway near Quebec City.

Then come the emergency maneuvers: what’s the procedure for getting out of a kayak that’s just capsized? How do you help someone who has capsized?

I didn’t have time to get to this stage of the course. I capsized before. I don’t remember how I managed to extricate myself from the kayak and get back to the surface, but we’re not talking about an approved method here. The brain immediately detects the danger and organizes itself so that the body gets out of the kayak and the head doesn’t stay underwater for too long.

In the minutes that follow, the instructor teaches us how to perform the classic exit from a capsized kayak. We work in pairs. At Level 1, there’s no question of using the paddle to force the kayak to turn.

To obtain KDM 1 certification, everyone must lean sideways so that the kayak tips over. Once submerged, the student leans forward, unhooks the spray skirt attached to the kayak, and slowly taps the kayak’s hull three times to signal that he is in control of what he is doing. The instructor wants to avoid unpredictable reactions. We then push ourself out of the kayak by placing our hands at hip height on the coaming. As soon as we are out of the water, it’s imperative that we hold on to our kayak, thanks to the lifeline. It only takes a few seconds. Here and there, you can hear a little coughing as the student surfaces, but nothing more. A good sip of St. Lawrence River boosts the immune system.

Next comes the recovery of the person in the water. As we work as a team, the kayaker in difficulty clings to the front of our kayak and stays there until we catch up with his or her kayak, lift it onto our boat, empty it of water, turn it over and position it correctly.

Sea kayaking course level 1 with Quatre Natures (photo Quatre Natures)
Sea kayaking course level 1 with Quatre Natures (photo Quatre Natures)

The person clinging to the kayak then releases his or her grip, and depending on the method taught, climbs back into the boat while the latter is being held securely. The important thing here is to keep the center of gravity as low as possible. If the person doesn’t hurry and proceed step by step, the operation is a success every time. 

A few more exercises follow, and it’s back to the beach on Île d’Orléans a few hours later. Once all participants have dried off and put on their warm clothes, the course concludes with a few weather notions, including the need to consult weather forecasts and radars, and to return quickly to shore when storm cells are present.

We also cover tide calculation (rule of 12) and how to attach a kayak to a car roof. How many attachment points? What equipment is available to make the job easier? Where should harnesses go to avoid breaking the kayak? Etc.

The KDM 1 certificate is awarded approximately eight to nine hours after the start of the course, depending on the instructor’s assessment. I noticed that on the way home, in the heat of the car, I really didn’t feel like rushing on the road. But you quickly come back to reality when you see how fast the cars are coming up behind you.

In short, a full day to remember!

Sea kayaking on the St.Lawrence Seaway near Rivière-du-Loup

Click on the link for autumn photos of Quebec City and Île d’Orléans on my blog.

Categories
Photos of Canada

A few photos of British Columbia

The pictures below were taken in Vancouver and Victoria, in British Columbia. They were all taken with a Canon 5DSR full frame camera.

In the Vancouver harbour, several condo towers have been built in the last few years. Many condos in those towers can now be rented by travellers through Airbnb, thus entering in direct competition with the hotels located nearby. I was trying to use the water reflections in the harbor to show one of the towers when this seagull appeared in the viewfinder, adding a touch of life to the scenery.

Another way of showing the Vancouver Harbour architecture (2016)
Another way of showing the Vancouver Harbour architecture (2016)

Floatplanes of all types constantly maneuver in the Vancouver harbour. The two photos below show a Saltspring Air Turbo Otter as it is being helped to park. You can also see a row of Harbour Air Beavers (DHC-2) parked after a day of uninterrupted flights.

Saltspring Air Turbo Otter C-FLAP in Vancouver Harbour 2016
Saltspring Air Turbo Otter C-FLAP in Vancouver Harbour 2016

Harbour Air DHC-2 Beaver floatplanes in Vancouver, British-Columbia (2016)
Harbour Air DHC-2 Beaver floatplanes in Vancouver, British-Columbia (2016)

In the Willows Beach’s Park, in Victoria, I was able to photograph this Cooper’s Hawk using a Canon 70-200 f2.8L IS II USM telephoto lens. The full frame sensor 50 megapixels allowed for some serious cropping to bring the bird closer. The hawk clearly annoyed all the crows that considered themselves as the owners of the territory.

Cooper's Hawk in a Victoria's public park (2016)
Cooper’s Hawk in a Victoria’s public park (2016)

In the evening, the fishing boats come back to the Victoria Fisherman’s Wharf. Since I was standing on a moving platform, the use of a tripod would have been useless because of vibrations impossible to eliminate. The solution was to use a lens requiring little light, like the Canon EF 50mm 1.4 USM. By increasing the aperture and the ISO, the picture could be taken with a high enough shutter speed to avoid a blurred photo.

Fishing vessel in the Victoria harbour (2016)
Fishing vessel in the Victoria harbour (2016)

 

Categories
Ship photography

The Harlequin near Lévis and heading to Rouen, France

The Harlequin in front of the Jean Gaulin refinery in Lévis, 2017.
The Harlequin in front of the Jean Gaulin refinery in Lévis, 2017.

The picture above shows the Harlequin, a bulk carrier built in 2012 that has a 9.7 meter draught. It sails under the Cyprus convenience flag. On June 18th 2017, when the photo was taken, it was in front of the Jean Gaulin refinery in Lévis, Quebec, and was about to cross the Atlantic heading to Rouen, France. The Jean Gaulin refinery is Quebec’s largest refinery and ranks second in Canada when it comes to refining crude oil.

The photo was taken at 21:07, just before nightime. Since I was positioned on the highest floor of the Quai des Cageux wooden tower, there were constant vibrations associated with people going up and down the stairs. The tower’s movement combined with a moving vessel made the use of of tripod totally useless. It was thus necessary to make a handheld photo, which seriously increased the risk of a blurred picture considering the lack of light.

A Canon EF 85mm f/1.2 II USM fixed lens installed on a Canon 5DSR full frame camera helped to make a successful shot. The fact that this kind of lens requires very little light increases the photographer’s margin of manoeuver. It would obviously have been possible to increase the ISO to 6000 and more to compensate for the poor lighting, but that would have degraded the photo’s quality. The ISO was thus limited to 2000, with a shutter speed of 1/200 sec and a 1.6 aperture.

In order to limit the risk of a blurred picture, it was necessary to follow the movement of the ship with the camera. The closer one gets to immobilizing the ship in the viewfinder, the better the chances of a defined photo.

Since the ship was farther than it appears on the picture above, some cropping was mandatory to bring the vessel to a decent size. If the ISO had been too elevated to start with, the ensuing photographic grain would have been too big after the cropping and the quality of the picture would have suffered. With an ISO limited to 2000, the image kept a decent definition.

For other pictures of ships on my website, click on the following link : Ship photography.

Categories
Ship photography

Ship photography: the Havelstern between Quebec City and Lévis

The Havelstern is a chemical tanker sailing under Canadian flag which was built in 1994. Its draught is of 8.5 meters. It is photographed here on June 3rd 2017 in front of Quebec City, with Lévis in the background, heading to Point Tupper in Nova Scotia, Canada.

The Havelstern between Quebec City and Lévis on June 3rd 2017
The Havelstern between Quebec City and Lévis on June 3rd 2017

Several vessels are visible in the picture above. In the foreground, it is possible to see the two chimneys of the Louis Joliet, a boat essentially used for tourist excursions. Then there is one of the two ferries constantly traveling between the south and north shore of St. Lawrence Seaway between Lévis and Quebec City.

The small boat riding by the Havelstern is used to carry one of the St. Lawrence Seaway pilots. A pilot who masters the navigation specifications on this part of the seaway boards the ship and takes control until he can transfer the control to another pilot farther down the seaway ( Pilotes du St-Laurent ). In the background is the second ferry used to carry passengers and cars from one shore to the other.

The full-frame camera used to take the pictures was a Canon 5DSR equipped with a Canon EF 70-200mm f/2.8L IS II USM lens. With a 5.0 aperture and the ISO set at 200, the shutter speed allowed was 1/1000 sec.

The Havelstern ship and île d'Orléans in the background, June 2017
The Havelstern ship and île d’Orléans in the background, June 2017

While the tourists are having fun in Quebec City, the picture above shows the Havelstern heading to Île d’Orléans in a rain shower.

The picture below represents the Havelstern making a wide turn to navigate around the southern portion of Île d’Orléans. The ship was quite far away and some serious cropping would have to be done in order to enlarge the image. In order to get a picture that would not be blurred, I had to increase the shutter speed a bit.

The Havelstern ship is approaching Île d'Orléans in June 2017, heading to Point Tupper in Nova-Scotia
The Havelstern ship is approaching Île d’Orléans in June 2017, heading to Point Tupper in Nova-Scotia

The ISO was adjusted to 200 and the focal length was set to 200mm. The aperture was only 4.0, allowing a shutter speed of 1/2500 sec.

For other pictures of ships on my website, click on the following link : Ship photography.

Categories
Photos of Canada Photos of Quebec Ship photography

The Bulk Carrier Ferbec in front of Quebec City

CSL Bulk Carrier vessel Ferbec passing by Quebec in May 2017
CSL Bulk Carrier vessel Ferbec passing by Quebec in May 2017

CSL Ferbec Bulk Carrier vessel in 2017
CSL Ferbec Bulk Carrier vessel in 2017

The picture above shows the Bulk Carrier Ferbec. It belongs to CSL (Canada Steamship Lines). It was built in 2002 and regularly travels between Sorel and the North Shore to carry ore. It is seen here in front of Quebec in May 2017, with Lévis in the background.

The picture was taken using a Canon 5DSR equipped with a Canon EF 85mm f/1.2L II USM fixed lens.

Instead of taking only a picture of the vessel, I thought it would be more interesting to keep it at a distance and capture the scene when I would see, in the viewfinder of the camera, vegetation partly surrounding the ship.

Weather was quite unstable around Quebec. On the north shore, the sky was mostly covered by a thin veil of cirrus clouds while on the south shore were numerous towering cumulus with rain showers.

Since there were only thin clouds on the north shore of the seaway, a part of the sunlight directly hit the side of the ship, adding some dynamism to the scenery.

Surprisingly, there was only a very light wind directly over the seaway, which helped improve the ship’s reflection in the water. All the elements were now present to capture a souvenir shot of the Ferbec in front of Quebec City.

For other ship photos posted on my website, click on the following links:

Ship photography

For other photos on the province of Quebec and also Quebec City, click on the following links from my blog:

Province of Quebec Photos

Quebec City and Île d’Orléans in Autumn

Quebec City and Île d’Orléans in Winter

Quebec City and Île d’Orléans in Spring

Quebec City and Île d’Orléans in Summer

Categories
Photos of Canada Photos of Quebec

Photography with the Canon 5DSR in the Port of Montreal

In June 2016, I spent a few days in Montreal to look for photo opportunities in the city and in the Old Port. I had never seen so many construction projects going on at the same time in that city. We could feel that the city managers wanted everything to be perfect for the 375th anniversary of the city in 2017. Here are 2 percent of the photos that were taken during that photography session. (The files were in RAW and JPEG).

Photography and architecture. Habitat 67 in Montreal
Photography and architecture. Habitat 67 in Montreal

The picture above represents Habitat 67, created in time for the 1967 Universal Exhibition by the architect Moshe Safdie. You can click on the following link if you wish to obtain supplementary details in regards to the conception and construction of Habitat 67: Moshe Safdie and Habitat 67

To take the photos, it was better to wait for the evening, a few minutes before nightime, in order to benefit from a better luminosity and prioritize the reflection of light sources on the water. Several boats passed by while I was taking the pictures and it momentarily diminished the quality of the light reflections. Eventually, after several trials, I benefited from a flat water surface. With ISO at minimum, I was able to limit the digital noise that would unavoidably become visible after cropping the images.

Habitat 67 Montreal
Habitat 67 Montreal

A photographic exposure lasting a few seconds helped to flatten the water surface and emphasize the light reflections. I made sure to keep the tugboats in front of the buildings since I consider that they added some dynamism to the scene. As usual, the use of a tripod, remote trigger and mirror lock-up helped to reduce the camera vibrations. Liveview was activated and the focus was done manually to ensure optimal image sharpness.

The picture below shows the abandoned grain silos in the Old Port of Montreal. They are protected since 1996 and will possibly be given a new role next year, just in time for Montreal 375th anniversary.

Grain silos in the Old Port of Montreal in 2016. Photo taken with a Canon 5DSR.
Grain silos in the Old Port of Montreal in 2016. Photo taken with a Canon 5DSR.

The bulk carrier Venture (formerly called Balder), built in 2002 and belonging to the CSL company, was docked in the Old Port. I tried a few shots, among them one with a telephoto lens Canon 14 mm 2.8L.

The Bulk Carrier Venture (CSL) in Montreal in 2016
The Bulk Carrier Venture (CSL) in Montreal in 2016

To get a privileged access to the harbor installations, where all the loading and unloading operations are performed, would have been really interesting, but, since it was not the case, I had to try to capture an idea of the Port activities from a distance. I wanted to include the wagons loaded with containers and the ships. The use of a polarizing filter allowed the enhancement of the colours of the wagons. I thought necessary to include the venerable Molson Brewery building in one of the shots.

View of the Montreal Harbor, Molson Brewery and the Jacques-Cartier bridge in 2016
View of the Montreal Harbor, Molson Brewery and the Jacques-Cartier bridge in 2016

Then, profiting from the cancellation of the low pass filter in the Canon 5DSR DSLR, as well as the impressive enlarging capacities offered by the 50.6 megapixels full frame sensor, it was possible to capture a bit of the Port activities by cropping the photo later on, without any loss in quality, using an image editing software. The picture was taken with a telephoto lens Canon EF 24-70 mm f/2.8L USM at 70 mm.

Port of Montreal with ships and containers. Photo taken with a Canon 5DSR in 2016
Port of Montreal with ships and containers. Photo taken with a Canon 5DSR in 2016

For other photos on the province of Quebec and also Quebec City, click on the following links from my blog:

Province of Quebec Photos

Quebec City and Île d’Orléans in Autumn

Quebec City and Île d’Orléans in Winter

Quebec City and Île d’Orléans in Spring

Quebec City and Île d’Orléans in Summer

Categories
Photos of Canada Photos of Quebec

Photography: the Canon 5DSR DSLR camera and its 50.6 megapixel full frame sensor

The container ship Maersk Pembroke under the Quebec Bridge, May 2016
The container ship Maersk Pembroke under the Quebec Bridge, May 2016

Choosing what is important in a camera

Since there is actually no camera that has everything, whatever the brand, the buyer of a new camera must make choices: the type of sensor, the number of megapixels, the weight and size of the camera, the automatic focus’s speed and ability to follow a subject, the number of images per second, the performance under low light, the possibility to greatly enlarge a picture while maintaining its quality, advanced video functions, electronic communications with other devices, an extensive choice of lenses, etc. The list can be quite long…

The Canon 5DS(R): a specialized camera

A photographer happy with the Canon 5DS or 5DSR is one who needs a specialized camera offering both sharp images and the possibility of greatly enlarging the pictures it takes while maintaining the initial quality. This camera allows for more creativity as the possibility of extreme cropping beats, for now, everything that is on the market in the DSLR format.

Testing the potential of the Canon 5DSR when it comes to enlarging a picture

Here is an example of what this means: the photo below shows the yellow M of the McDonald’s restaurant photographed with a 50mm lens. Not easily visible…

Mc Donald's restaurant's yellow M captured with a 50 mm lens. Hard to see, of course!
Mc Donald’s restaurant’s yellow M captured with a 50 mm lens. Hard to see, of course!

Then the next photo was taken with a Canon EF 70-200mm f/2.8L IS II USM telephoto lens set at a 200mm focal length.

Testing the Canon 5DSR: the Mc Donald's restaurant's yellow M enlarged through a Canon EF 70-200mm f/2.8L IS II USM telephoto lens. Focal length used: 200mm.
Testing the Canon 5DSR: the Mc Donald’s restaurant’s yellow M enlarged through a Canon EF 70-200mm f/2.8L IS II USM telephoto lens. Focal length used: 200mm.

But the picture can be enlarged a lot more using the amazing resolution of the Canon 5DSR. The following picture shows the result after cropping the 200mm image: the yellow M now takes the whole vertical space available in the picture without any loss in quality.

The Mc Donald's restaurant's yellow M, after having been enlarged (focal 200mm) and cropped within the Canon 5DSR.
The Mc Donald’s restaurant’s yellow M, after having been enlarged (focal 200mm) and cropped within the Canon 5DSR.

From my position on the hill, the yellow M was barely visible with the naked eye. By using a 200mm focal length, followed by serious cropping, I was able to obtain the result above. So it is possible to photograph a subject that is almost invisible without a telephoto lens and transform it into the principal subject of the picture without any loss in quality.

I chose the 5DSR because the anti-aliasing filter has been neutralized in the model R to offer even sharper images, although there is a risk of occasional moire effect when there are repetitive patterns in a scene. This is the compromise that Nikon users must also have to deal with.

Rethinking photography

The 50.6 megapixel full frame sensor in the Canon 5DS or 5DSR allows a new approach of photography for those who do not have access to a much more expensive and larger medium format camera that does not necessarily give really superior pictures.

When I go outside for a photo session, it seems to me that I now carry a huge telephoto lens without the weight and the cost. A lot of what seemed to be unavailable possibilities are now accessible.

Taking pictures of people in the street is now less complicated: there are no more suspicious looks, artificial poses or people hiding their face. This is an ideal camera to capture people acting naturally without disrupting their routine. Gone is the feeling that you are bothering them in any way.

Quartier Petit-Champlain Old Quebec May 2016
Quartier Petit-Champlain Old Quebec May 2016

The photo below was taken while I was standing at least 300 meters from the scene, just after sunset. For those who are from Quebec City, I positioned the tripod on a high wall on the other side of Chemin St-Louis, near the St. Louis Gate. I had to slightly brighten up the picture to make the details more visible, risking at the same time to increase the digital noise. It was a May 2016 warm misty evening, which is clearly visible by the lack of details in the background as we look in the distance.

Quebecers defying gravity in Old Quebec, May 2016
Quebecers defying gravity in Old Quebec, May 2016

But those are not the only possibilities of this camera. The Canon Company, in its promotional video, explains what exactly the camera was designed for:

How can someone maximize the use of a 50.6 megapixel full frame sensor

In order to bring a subject closer to you while fully benefiting  from the Canon 5DSR 50.6 megapixel full frame sensor, it is obvious that there must be absolutely no vibrations. The photographer must therefore use a tripod, a remote control release and the mirror lock-up function. This allows for a very low ISO setting while avoiding a blurred picture.

The mirror lock-up function is very well thought through, with the possibility to choose a totally automatic processus according to a timing chosen by the photographer (between 0 and 2 seconds). The system eliminates any secondary micro vibrations.

In order to ensure an even better picture, the photographer must use Liveview and set it to the 16X enlargement available on that camera (versus 10X on my Canon 5D MKII) to manually adjust the focus. It is then possible to see the slightest vibrations caused by the wind. Doing so, I realized that my camera strap, lightly swaying in the wind, was causing some minimal vibrations. Every detail taken into consideration will improve the final result.

One must then ensure to immobilize the strap and even diminish the tripod height if possible when the wind is blowing. These steps will allow an incredible enlargement of a subject while maintaining the initial quality of the image offered by a full frame sensor.

Superior mirage effect (cold mirage)

The photo below shows a ship being helped by two Ocean tugboats on its way towards the Quebec Harbour. The ship was at a good distance from the harbour; it is then possible to witness the superior mirage effect (cold mirage) resulting from a temperature inversion immediately over the water. The boats are deformed but the important close-up has not lowered the image quality. It has instead allowed to increase the atmospheric phenomenon effect.

Superior mirage (cold mirage) effect. Vessel and two Ocean tugboats on the St-Lawrence seaway heading to the Quebec Harbour, May 2016.
Superior mirage (cold mirage) effect. Vessel and two Ocean tugboats on the St-Lawrence seaway heading to the Quebec Harbour, May 2016.

Once closer to the Quebec Harbour, the cold mirage effect decreased, as shown on the picture below:

Quebec Harbour, May 2016
Quebec Harbour, May 2016

The Canon 5DS or 5DSR without the use of a tripod or mirror-lock

Obviously, a tripod is not necessary if you do not intend to use a lot of cropping to enlarge a photo. You will obtain excellent results with the hand-held camera providing that you remember that this Canon DSLR is a specialized tool.

So many megapixels on a sensor of that size require that the photographer adapts his technique. But, as you can see from the picture below, it is totally possible to capture an aircraft in movement, even at dusk (May 11, 19:49), when the camera’s parameters are correctly adjusted. A higher shutter speed than normal is, in this case, absolutely mandatory.

The photo below shows an Air Canada Express Bombardier DHC-8-402NG (C-GSJZ) on final for runway 29 at the Quebec Jean-Lesage international airport (CYQB).

Bombardier DHC-8-Q-402NG (C-GSJZ — Air Canada Express) on final for the Quebec Jean-Lesage international airport, May 2016. Photo taken with a DSLR Canon 5DSR.
Bombardier DHC-8-Q-402NG (C-GSJZ — Air Canada Express) on final for the Quebec Jean-Lesage international airport, May 2016. Photo taken with a DSLR Canon 5DSR.

The Maersk Pembroke with the camera hand-held

The photo below shows the Maersk Pembroke container ship photographed with a hand-held camera using a Canon EF 70-200mm f/2.8L IS II USM telephoto lens during Spring 2016 near Quebec City. The focal length was only 140mm and the shutter speed 1/1000. The lens was equipped with a polarizing filter and the photo taken when the vessel was approaching the Quai des Cageux.

The Maersk Pembroke container ship on the St-Lawrence seaway near Quebec City, May 2016
The Maersk Pembroke container ship on the St-Lawrence seaway near Quebec City, May 2016

The colours produced by the Canon 5DSR

The digital processing of the image and colours produced by the Canon 5DSR require different adjustments than what was necessary with the Canon 5D MKII. I am still learning how to handle the results produced by this camera so I will wait a bit before commenting.

View of Old Quebec from the St. Louis gate. Quebec City, May 2016
View of Old Quebec from the St. Louis gate. Quebec City, May 2016

Night photography

Here are two photos taken during the evening in Quebec City. The photo below required a 200mm focal, an ISO set at 4000 and a shutter speed at 1/30 in order to obtain something else than trailing lights. Luckily, the traffic was moving slowly…

Night photography, Grande-Allée avenue, Quebec City, May 2016
Night photography, Grande-Allée avenue, Quebec City, May 2016

The picture below, taken with a 200 mm focal, required an exposure time a bit longer that one second with the ISO set at 800. To take the photo, I took advantage of the fact that the cars were momentarily stopped at a red light, so that they would be clearly visible.

Night photography, Tourny fountain and Quebec lower town, May 2016
Night photography, Tourny fountain and Quebec lower town, May 2016

The images per second of the Canon 5DS(R)

The Canon 5DSR is so far quite an impressive camera. I would have appreciated that Canon offer a higher rate of images per second (7 instead of 5) to make it more versatile.

The camera allows taking pictures with smaller formats than 50.6 MP, the two other options being 28 MP and 12 MP. If the camera can deliver five images per second with 50.6 MP RAW files, we can deduct that it is able to offer more speed for smaller formats. But the camera is blocked at 5 IMS so that it, I suppose, does not compete with other existing Canon models of the same category…

Nonetheless, Canon says that the rapid sequence of shooting lasts longer if the photographer uses the smaller files provided. So it is not faster, but it keeps on firing for a longer period. My guess is that it would only require a new firmware version to improve this camera’s number of images per second.

For other night pictures, click on the following link to my site:

Night Photography

For other photos on the province of Quebec and also Quebec City, click on the following links from my blog:

Province of Quebec Photos

Quebec City and Île d’Orléans in Autumn

Quebec City and Île d’Orléans in Winter

Quebec City and Île d’Orléans in Spring

Quebec City and Île d’Orléans in Summer

Categories
Photography Ship photography

Ship photography: Yilmar’s YM Saturn approaching Quebec in 2014

Ship photography: the YM Saturn, owned by Yilmar, is approaching Quebec City in 2014
Ship photography: the YM Saturn, owned by Yilmar, is approaching Quebec City in 2014

The YM Saturn is a merchant navy ship carrying chemical products. The owner is Yilmar Shipping and Trading, from Istanbul, Turkey. It was built in 2007 and uses the Malt flag throughout its international trips. You can see it here, approaching Quebec City, in 2014. In the background, the Île d’Orléans bridge is visible.

In order to frame the vessel differently during its approach toward Quebec City, I positioned myself at the corner of Buade Street, in Old Quebec. The street and surroundings trees and branches offered a natural frame in which it became possible to position the ship. Weather conditions were constantly changing, with rain showers that allowed to get a more lively street. The ship was far away, but the compressed perspective effect created by a Canon 70-200mm 2.8 coupled with a 2X extender gives a feeling of proximity.

For other ship photos posted on my website, click on the following link:

Ship photography