Beaver floatplane – Photography, aviation and flight simulation

The pictures below were taken in Vancouver and Victoria, in British Columbia. They were all taken with a Canon 5DSR full frame camera.

In the Vancouver harbour, several condo towers have been built in the last few years. Many condos in those towers can now be rented by travellers through Airbnb, thus entering in direct competition with the hotels located nearby. I was trying to use the water reflections in the harbor to show one of the towers when this seagull appeared in the viewfinder, adding a touch of life to the scenery.

Another way of showing the Vancouver Harbour architecture (2016)

Floatplanes of all types constantly maneuver in the Vancouver harbour. The two photos below show a Saltspring Air Turbo Otter as it is being helped to park. You can also see a row of Harbour Air Beavers (DHC-2) parked after a day of uninterrupted flights.

Saltspring Air Turbo Otter C-FLAP in Vancouver Harbour 2016

Harbour Air DHC-2 Beaver floatplanes in Vancouver, British-Columbia (2016)

In the Willows Beach’s Park, in Victoria, I was able to photograph this Cooper’s Hawk using a Canon 70-200 f2.8L IS II USM telephoto lens. The full frame sensor 50 megapixels allowed for some serious cropping to bring the bird closer. The hawk clearly annoyed all the crows that considered themselves as the owners of the territory.

Cooper's Hawk in a Victoria's public park (2016) — Cooper’s Hawk in a Victoria’s public park (2016)

In the evening, the fishing boats come back to the Victoria Fisherman’s Wharf. Since I was standing on a moving platform, the use of a tripod would have been useless because of vibrations impossible to eliminate. The solution was to use a lens requiring little light, like the Canon EF 50mm 1.4 USM. By increasing the aperture and the ISO, the picture could be taken with a high enough shutter speed to avoid a blurred photo.

Fishing vessel in the Victoria harbour (2016)

An Harbour Air DHC-2 Beaver floatplane is just airborne from Vancouver

The photo above portrays a Beaver floatplane belonging to Harbour Air. It is seen here a few minutes after its take-off from the Vancouver Harbour floatplane base in British Columbia. The picture was taken with a Canon 5DSR full-frame camera equipped with a Canon 70-200 f2.8L IS II USM telephoto lens.

The aircraft, quite small in the photo, could have been enlarged using the Canon 5DSR’ s 50 megapixel full-frame sensor. The image would still have been of excellent quality but I would have lost the effect I was initially looking for.

As opposed to what seems obvious at first sight, the scenery was not captured sitting in another plane but from the ground, while I was standing near the Harbour Air seaplane base. The morning’s constant precipitation saturated the air with moisture and helped create a low level cloud base.

An image editing software was then used to crop the scene. I used a non standard photo format to show the kind of flight the pilot was dealing with, between two cloud layers and with a mountain range on his right. It seems to me that a photographer does not have to feel obliged to follow an arbitrary format if the latter has a negative impact on the intended result.